Audited Supplier
1. TPS220M-6000W
160m
5500W-6000W
-20 to 55 Degrees Celsius
Manual Button to Wind Cable Auto
24 Hours
110-220V
Drone Tethered Power System
Rosefinch
Carton Case
500*375*260mm
Nanjing, China
8504401500
Product Description
TPS220M-6000W Tethered Power System with tethered drone cable
TPS220M-6000W Tethered Drone System
1. Typical characteristics
1) Small size, light weight, easy to carry, and fast deployment.
2) Easy to operate, no need to operatetethering boxduring UAV flight.
3) Comprehensive protection function, fault elimination and self recovery.
4). Automatic take-up, and manual button to rewind whenpower cut off.
5) Airborne power supply constant voltage output.
2. Adapt to drone
1) Support flight altitude: 100/200m (tethered cable 110/220m, reserved safety length).
2) Support takeoff weight: 20-30kg (drone power efficiency varies, this data is for reference only).
3) Support flight duration: ≥ 48h (the system can support working duration, which depends on the structure and electrical fatigue resistance of the drone).
3. Functional characteristics
1) Cable retraction and release function: Follow the drone takeoff and landing to synchronously retract and release the mooring cable, adaptively adjust the tension, manual button to rewind when power cut off.
2) Protection function: Input overvoltage and undervoltage protection, output overvoltage, overcurrent, short circuit, over temperature protection, fault elimination and self recovery.
3) Data display function: The 4.0 inch touch screen displays data such as voltage, current, temperature, cable outlet length, date, time, operation records, fault records, and working status information.
4) Setting and adjustment function: The display screen supports the setting and adjustment of wire winding speed, wire winding tension, wire release tension, safety length, date and time, and supports switching between Chinese and English display.
5) Fault alarm function: When the system malfunctions, the display screen scrolls to display fault information, and the fault alarm light flashes red and beeps to alert.
4.Parameters
1. Unless otherwise specified, the above data are all tested at Ta=25 ºC, humidity<75%, nominal input, and rated load.
2. Due to space limitations, there is incomplete data in the sheet. If necessary, please contact our sales personnel to obtain it.
TPS220M-6000W Tethered Power System with tethered drone cable
TPS220M-6000W Tethered Drone System
1. Typical characteristics
1) Small size, light weight, easy to carry, and fast deployment.
2) Easy to operate, no need to operatetethering boxduring UAV flight.
3) Comprehensive protection function, fault elimination and self recovery.
4). Automatic take-up, and manual button to rewind whenpower cut off.
5) Airborne power supply constant voltage output.
2. Adapt to drone
1) Support flight altitude: 100/200m (tethered cable 110/220m, reserved safety length).
2) Support takeoff weight: 20-30kg (drone power efficiency varies, this data is for reference only).
3) Support flight duration: ≥ 48h (the system can support working duration, which depends on the structure and electrical fatigue resistance of the drone).
3. Functional characteristics
1) Cable retraction and release function: Follow the drone takeoff and landing to synchronously retract and release the mooring cable, adaptively adjust the tension, manual button to rewind when power cut off.
2) Protection function: Input overvoltage and undervoltage protection, output overvoltage, overcurrent, short circuit, over temperature protection, fault elimination and self recovery.
3) Data display function: The 4.0 inch touch screen displays data such as voltage, current, temperature, cable outlet length, date, time, operation records, fault records, and working status information.
4) Setting and adjustment function: The display screen supports the setting and adjustment of wire winding speed, wire winding tension, wire release tension, safety length, date and time, and supports switching between Chinese and English display.
5) Fault alarm function: When the system malfunctions, the display screen scrolls to display fault information, and the fault alarm light flashes red and beeps to alert.
4.Parameters
| Items | Technical parameters | |
| Ambient temperature | -20~45 ºC (working), -40~65 ºC (storage) | |
| Relative humidity | 10-80% RH (working), 5-90% RH (storage) | |
| Altitude | ≤ 3000m | |
| Ground power module | Input voltage | 176-264Vac wide range input, single-phase 220Vac@45-65Hz |
| Output voltage | 600~810Vdc adjustable, factory default 800Vdc | |
| Output power | 8000W (rated long-term output), 10000W (peak value ≤ 30s) | |
| Storage cable length | Supporting maximum storage cable ≥ 220m | |
| Retraction speed | 0-2m/s, adjustable | |
| Reel in/out tension | 0-15N, adjustable | |
| Interface | Input aviation socket, fiber optic FC port (optional), communication Type-C port, cable output XT60 connector | |
| Buttons and switches | High-voltage on/off button, cable forced retraction button, input AC switch, alarm indicator light | |
| Size | 500 × 375 × 260 ± 0.5mm, excluding foot pads | |
| Weight | 16.5± 0.5kg, not including tethered cable | |
| Tether cable | Material | Silver plated lightweight high-temperature resistant aviation wire, composite fluoroplastic insulation layer, high modulus tensile aviation grade fiber woven layer |
| Fiber optic (optional) | The tethered cable is an optoelectronic composite cable, which contains tightly packed single-mode fiber optic and can be optionally equipped with fiber optic communication | |
| Current | 7-10A | |
| DC resistance | 4.6 ± 0.1 Ω, 100m@20 ºC loop | |
| Tensile strength | ≥ 200kg, resistant to repeated retraction and release ≥ 1000 times | |
| Insulation strength | ≥ 3000Vdc, no breakdown for 1 minute | |
| Cable length | 110/220 ± 2m, supporting customized line length, fiber optic with FC connector (optional). | |
| Outer diameter | 3.5 ± 0.2mm | |
| Weight | 2.1 ± 0.1kg/100m | |
| Air module | Input voltage | 600~830Vdc wide range input |
| Output voltage | 50 ± 0.5Vdc, constant voltage output, supporting voltage customization | |
| Output power | 6000W (rated long-term output), 8000W (peak value ≤ 10s) | |
| Protection function | Input overvoltage and undervoltage protection, output overvoltage, overcurrent, short circuit, and over temperature protection | |
| Communication function | CAN communication reports voltage, current, temperature and other data as well as working status information | |
| Isolation voltage | 3000V (Vin-Vout), 1min, leakage current ≤ 5mA, no breakdown, flashover, or corona phenomenon | |
| Installation method | Reserved installation ears, fixed with screws | |
| Heat dissipation method | External fan active heat dissipation, reserved air duct forced air cooling | |
| Interface | Input XT60, output XT90 * 3 | |
| Protection level | IP54 | |
| Size | 200 × 150× 68 ± 0.5mm, excluding mounting lugs | |
| Weight | 2200 ± 50g, excluding external connectors | |
2. Due to space limitations, there is incomplete data in the sheet. If necessary, please contact our sales personnel to obtain it.
TPS220M-6000W Tethered Power System with tethered drone cable
For drone tethered power system,you can choose several types from below form:
| 1.TPS33M-M3 Tethered Power System 2. TPS110M-M30 Tethered Power System 3. TPS110M-M300/M350 Tethered Power System New Version 4. TPS110M-M300/M350 Tethered Power system 5. TPS33-600W Universal Tethered Power System 6. TPS110-2000W Universal Tethered Power System 7. TPS160M-3000W Universal Tethered Power System New Version 8. TPS160M-3000W Universal Tethered Power System 9. TPS220M-3000W Universal Tethered Power System 10. TPS220M-6000W Universal Tethered Power System 11. TPS330M-12000W Universal Tethered Power System |
Main Applications of Drone Tethered Power System |
-Day and night missions
-Radio relay
-Crisis management
-Site protection
-Traffic surveillance
-Large-scale events security
-Forest surveillance
-Industry monitoring
-Air-quality monitoring
| Important safety notice of Drone Tethered Power System |
1. More rotor unmanned aerial vehicle (UAV) is of certain danger and destruction, improper operation may cause personal injury or property damage, please use the product in strict accordance with the operating manual
2. The operator should receive professional training and examination, untrained personnel do not handle this product
3. Don't be drunk, poor state of fatigue, sick when handling this product
4. Must keep personnel with safe distance between unmanned aerial vehicle (UAV), constantly to prevent the possibility of danger
5. Please fly under the safe take-off weight, in case of any risks.
6. Please not fly under strong electromagnetism interference circumstance
7. Please follow the local laws and regulations and not fly in no-fly zone
8. Please not keep close or touch the rotating motor or propeller, in case cut by the rotating propellers.
9. Please charge the two batteries full before install them to the uav, and make sure their differential pressure less than 0.1 V
10. The battery long time no use, please store it in ventilated dry place with 60% electricity
| Our service Our Main Solutions 1. Mapping, surveying and 3D modeling 2. Surveillance 3. Inspection 4. Delivery 5. Customization according to application and client's requirements |
| Company Information |
The "Drone Tethered Power System" - Rosefinch Technology is the leading manufacturer of drone tethering power station.Rosefinch mainly engages in the R&D, production, sales of AC-DC, DC-DC high-frequency switching power modular and the drone tether power system.The system is compatible for all multi rotor drones.
| FAQ |
Q1: Do you support OEM/ODM?
A1: Yes. We can print your logo on the product.
Q2: About samples.
A2: Under normal circumstances, samples will be ready within 7 days, and 10-20 days for OEM/ODM orders. Sample fee and shipping will be charged.
Q3: What is the delivery time?
A3: For regular orders, we can ship within 15 days, for OEM/ODM, we can ship within 25-45 days (depending on the quantity). In the event of delays, we will notify you in advance of the status and resolution.
Q4: What is the minimum order quantity?
A4: There is no MOQ for wholesale (1 piece accepted), including OEM/ODM.
Q5: Can you reduce the shipping cost?
A6: When calculating the shipping cost for you, we always choose the cheapest and safest express. Although we have partnerships with shipping companies, we can't keep costs down because it's not us who get paid. If you think it's expensive for you. You can always make your own choice.
If you look for Tethered Drone manufacturers & suppliers of Drone Tether Systems for UAV, Quadcopters, UAS & ground stations,please contact us freely.
