Audited Supplier
ES-16-25P
a Lifetime
1 Year
Sheet Extruder
PVC
Extrusion Molding Machine
One Feed
Separate Type Extruder
Single-Screw
Intermeshing
Non Deep Screw
Don't Exhaust
Automatic
Computerized
16mm
25/1
Many
Many
38 Crmoala
3.0/1
Hapro
Plywood
China
9024800000
Product Description
The table type single screw extruder can be used together with the table type film casting machine and the table type film blowing machine to complete the forming test of film products under the condition of very little amount in the laboratory
Principle
Simulate Production Realistically on a Laboratory Scale ,single screw measuring extruder serves for testing the extrudability of polymers and for studying thesis occurring in research and development as well as in practical application. The single screw extruder system allows a complete instrumentation of the extruders for the control and development of raw material. Different screws, die heads, and downstream equipment fulfill all kinds of extrusion tasks.
Application
In the measuring extruder , the sample material is plastified under practice-oriented conditions and extruded through the die head. All measuring values such as torque, melt temperature, melt pressure are recorded continuously and represented in the form of tables and diagrams parallel to the current test. The extrudate is tested for various criteria:
• Uniform plastification, gloss, gels
• Color dispersion and color matching
• Transparency and formation of streaks, e.g. with transparent materials
• Swelling and contraction behaviour
• Segregation of individual recipe components of a compound at the die and/or at the screw`s tip
(e.g. titanium dioxide)
• Output per unit of time, etc.
Drive device
It is mainly used to complete the plastic plasticizing and transportation by uniform rotation for torque setting,Servo motor control screw torque, pre-set torque from touch-screen. Feeding device
Material depend on its own gravity from the hopper into the screw barrel .According to the properties of material production and processing technology conditions, adjust the volume of feed speed and extrusion in order to achieve the balance. Barrel
It contains materials and screw.
E = feed opening of the extruder
L1= feed section
L2= compression section
L3= metering section
L4= mixing section
Screws
For each measuring extruder, different screws are available.The screws are made of special steel, the flight basis and the lands are chromium-plated. Single- and multi- stage screws with various compression ratios and different lengths are available for testing a large range of materials.
a,It is suitable to extrude materials for example : PP PE PVC
b,It is suitable to extrude materials for example : PVC PP PE PC ABS etc.
c,It is suitable to extrude materials for example : HDPE LDPE etc.
d,It is suitable to extrude materials for example : PP PE PA PET etc.
e,It is suitable to extrude materials for example : PE PP PC PA etc.
f,It is suitable to extrude materials for example : PVC PP PE PC ABS etc.
g,It is suitable to extrude materials for example : PP PE PA ABS etc.
h,It is suitable to extrude materials for example : PA PC PBT PET etc.
i,It is suitable to extrude materials for example : PP AS PBT PE etc.
j,It is suitable to extrude materials for example : PP PE ABS PS etc.
Dies
- Technical Parameters:
| Photograph | Performance Index | Performance Parameter |
| Control interface | HMI | |
| Motor | AC inverter | |
| Motor power | 0.75 kW | |
| Reducer | TCG | |
| Speed ratio | 1:15 | |
| Screw speed | 100 r/min | |
| Screw Diameter | 16mm | |
| Screw L:D | 25 :1 | |
| Compression Ratio | 2.4:1or 3.6:1 | |
| Speed Range | 1-100 rpm | |
| Heating | Electrical Heating,PID,4 Zones | |
| Temp control system | RKC from Japan | |
| Heating zone | 4 Zones | |
| Max. Temperature | 350ºC | |
| Heating power | 1.1 kW | |
| Temperature sensor | J type thermocouple | |
| Cooling | Natural cooling | |
| Pressure Accuracy | 0.5%F.S | |
| Pressure Range | 0.1 ~ 100 Mpa | |
| Output | 1 -5 kg/ hr | |
| Feeding speed | Manual adjustment | |
| Feeding | Screw metering feed | |
| Power supply | 3×380V,50/60 Hz | |
| Dimension (L×W×H) | 1000×400×350 mm | |
| Weight | 60kg | |
| Dies head (Select two from four) | Capillary Die (InnerФ1.0,Ф1.27,Ф2.0 L:D:20/1,30/1,40/1) | |
| Flat Die( L×W:60×1.5 mm) | ||
| Pipe Die(Inner Ф10, Outer Ф12.5) | ||
| Coating Wire Die (Core Ф1.5,Die outlet Ф4.0) |
