Audited Supplier
FR-215S
After-Sales Service Supported
1 Year
Machinery&Hardware
High-Speed Slitting Machine
Razor Blade and/or Air Blade
Frame Part
Case
Tape Slitting Machine
Process Materials
Film & Masking Tape
Wood
1000mm
180m/Min
4-Shaft Exchange
Mitsubishi
Air Shaft
Air Blade
FURIMACH
Container
12.5T
Anhui, China
Product Description
FR-215S Medical Tape Slitting Machine
Application: suitable for slitting medical tape.
Safety instructions
Safety rules
1. Please read the operation manual before operating the machine.
2. The operator should not wear long hair or gloves, and should fasten the cuff.
3. Don't clean the machine in operation.
4. When the machine powers on, don't open the electronic control door or touch the electric components to avoid being hurt.
5. When machine is running, please keep a distance, don't touch the slitting blade.
6. Except for slitting rewinding, don't load materials on the rewind shafts.
7. Don't touch the rewinding shafts in when machine is running.
8. Don't open the control box or touch the driving part when visually measure the machine operation.
9. Don't put any tool on the machine.
10. Power off the machine before fixing it.
11. Before opening the electric box, switch off the power.
12. Don't tear the machine except professional technicians.
13. Please maintain the machine regularly.
Maintenance Instructions
8. Adjust the air pressure between 4~6kg/cm2(70 1b/in2~90 1b/in2)
9. Dispose the water and just need to move up.
10. Check the oil cup if the oil is enough or not, if not, add oil M22, M12 or NO> 10 oil cup.
11. Lubrication oil adjust F method to chuck ON-OFF 5 times and drip one drop of oil, clockwise the with much oil and counter clockwise with little oil.
12. A: Air pressure set button (up: pressure high on the right turn and vice versa)
B: pressure meter
C: air pressure source(quick connection head)
D: oil filter
E: water driller
F: lubrication oil adjustment
G: oil cup
Application: suitable for slitting medical tape.
| Model: FR-215S | Medical Tape Slitting Rewinding Machine | |
| Item | Content | Qty. |
| Specification 1. Effective width 2. Max. Unwind O.D. 3. Slitting width 4. Max. Rewind O.D. 5. Machine speed 6. Power 7. Air compressor 8. I.D. Of inner core 9. Slitting blade Unwind Unit 1. Unwind base 2. Unwind shaft 3. Unwind brake 4. Unwind tension 5.Unwind left-right adjust Rewind Unit 1.Main motor 2.Rewind shaft 3. Edge trimming 4. Spread roll 5. Auto turret exchange 6. Rewind tension 7. Driving press roll set 8. Maintenance tool Slit Unit 1. PLC 2. Touch panel Slitting tools 1. Air blade 2. Air blade holder set Accesories 1. Core loader 2. Mould | 1000mm 800mm Min. 12.5mm Four-shaft exchange 1"inner core: 80mm 180M/MIN 380V 50HZ/60HZ 3PHASE (WITH 220V TRANSFORMER) 5KG (prepared by user) 1" Air blade Connect type 3" Air shaft Powder brake PLC control Manual adjust 200mm AC motor 5HP+inverter control 1" air shaft Spool trim winder, left-right adjust: 100mm Ф100mm, spread curve: 10º AC motor 1/2HP auto exchange Spring type clutch Ф100mm rubber coated roll & cylinder press Tools & instructions Japan Mitsubishi 7" MCGS Blade holder & hard roller (made in Taiwan) with conveyor size optional | 1set 1set 1set 1set 1set 1set 4pcs 1set 1set 1set 2sets 1set 1set 1set 1set 80sets 1set 1set 4sets |
Safety rules
1. Please read the operation manual before operating the machine.
2. The operator should not wear long hair or gloves, and should fasten the cuff.
3. Don't clean the machine in operation.
4. When the machine powers on, don't open the electronic control door or touch the electric components to avoid being hurt.
5. When machine is running, please keep a distance, don't touch the slitting blade.
6. Except for slitting rewinding, don't load materials on the rewind shafts.
7. Don't touch the rewinding shafts in when machine is running.
8. Don't open the control box or touch the driving part when visually measure the machine operation.
9. Don't put any tool on the machine.
10. Power off the machine before fixing it.
11. Before opening the electric box, switch off the power.
12. Don't tear the machine except professional technicians.
13. Please maintain the machine regularly.
Maintenance Instructions
1. Keep machine clean and control box ventilated.
2. Air pressure three point combined valve open once per day to drain the oil water, and open four hours in moist atmosphere.
3. Three points lubrication oil and oil injector and check every day to ensure the smooth running of the machine.
4. Clean the machine surface and control box inside every day, and air shaft dust and oil dust (three times per week).
5. Add oil once per week.
6. Every month check the screws and driving part if loose or not.
7. Air pressure three points combined method.2. Air pressure three point combined valve open once per day to drain the oil water, and open four hours in moist atmosphere.
3. Three points lubrication oil and oil injector and check every day to ensure the smooth running of the machine.
4. Clean the machine surface and control box inside every day, and air shaft dust and oil dust (three times per week).
5. Add oil once per week.
6. Every month check the screws and driving part if loose or not.
8. Adjust the air pressure between 4~6kg/cm2(70 1b/in2~90 1b/in2)
9. Dispose the water and just need to move up.
10. Check the oil cup if the oil is enough or not, if not, add oil M22, M12 or NO> 10 oil cup.
11. Lubrication oil adjust F method to chuck ON-OFF 5 times and drip one drop of oil, clockwise the with much oil and counter clockwise with little oil.
12. A: Air pressure set button (up: pressure high on the right turn and vice versa)
B: pressure meter
C: air pressure source(quick connection head)
D: oil filter
E: water driller
F: lubrication oil adjustment
G: oil cup
