Tc4 Medical Titanium Rod Titanium Block for Dental Denture Titanium Round Disk

We supply titanium block products to various industry lines all around the world.such as aero space, medical, oil, chemical. etc. For over 10 years' developing. we are able to offer quality titanium products and superior service.

High quallty. good service. competitive price is our superiority.

Denture pure titanium block material is the selection of sponge titanium raw materials, after three vacuum melting, in the anti-oxidation and impurity pollution environment forging and mechanical addition, the product purity, chemical composition uniform, excellent mechanical properties, good casting, high casting rate, good mechanical processing performance.

Titanium blocks Development, classification and status of medical titanium and biological titanium alloy materials.20th Since the middle of the century, medical metal materials based on titanium alloy began to show a special and magical effect in the surgical implantation of human hard tissue and the interventional treatment of human soft tissue, and titanium alloy artificial joints, dental implants, vascular stents and other titanium alloy materials for medical devices in China, production and application, and the advent of typical medical device products Its development has epoch-making significance and revolutionary contribution, which makes clinical treatment rise from the simple "repair and orthopedic" treatment at the primary level to the "alternative" treatment of tissues and organs at a higher level, improves and enhances people's quality of life, and overcomes the insufficiency of relying solely on drug treatment for major diseases in the past.

Titanium Alloy Block:

Grades: TC4, TC4 El, GR5 (Grade 5 titanium),GR5 Eli, GR23

Standard: ASTM F136 , GB/T13810-2017,GB17168-2013

Specification and model: φ98X10mm,φ98X12mm,φ98X14mm,φ98X16mm,φ98X18mm,φ98X20mm,φ98X22mm,φ98X25mm

Usage: Used for planting upper bridge frames and cutting rod clamps
 

Grades: TA1, TA2, GR1,GR2

Standard: ASTM F67 , GB/T13810-2017,GB17168-2013

Specification and model: φ98X10mm,φ98X12mm,φ98X14mm,φ98X16mm,φ98X18mm,φ98X20mm,φ98X22mm,φ98X25mm

Usage:Used for digital cutting of dental crowns and bridges

1.High strength, the density of titanium alloy is generally about 4.51g/ cubic centimeter, only 60% of steel, the density of pure titanium is close to the density of ordinary steel, some high-strength titanium alloy exceeds the strength of many alloy structural steel.

2.High thermal strength, the use of temperature is several hundred degrees higher than aluminum alloy, at medium temperature can still maintain the required strength, can work at 450 ~ 500ºC for a long time at the temperature of these two types of titanium alloy in the range of 150ºC ~ 500ºC still have a high specific strength, and aluminum alloy at 150ºC specific strength decreased significantly. The operating temperature of titanium alloy can reach 500ºC, and that of aluminum alloy is below 200ºC.

3.Good corrosion resistance, titanium alloy works in the humid atmosphere and seawater medium, its corrosion resistance is far better than stainless steel; Resistance to pitting corrosion, acid corrosion, stress corrosion is particularly strong; Excellent corrosion resistance to alkali, chloride, chlorine, nitric acid, sulfuric acid, etc. However, titanium has poor corrosion resistance to reducing oxygen and chromium salt media.

4.Low temperature performance is good, titanium alloy at low temperature and ultra-low temperature, can still maintain its mechanical properties. Titanium alloys with good low temperature performance and very low gap elements, such as TA7, can maintain a certain plasticity at -253 ° C. Therefore, titanium alloy is also an important low-temperature structural material.

5.The chemical activity is large, the chemical activity of titanium is large, and the atmosphere of O, N, H, CO, CO2, water vapor, ammonia and other strong chemical reaction.

6.The thermal conductivity elasticity is small, the thermal conductivity of titanium λ=15.24W/ (m.K) is about 1/4 of nickel, 1/5 of iron, 1/14 of aluminum, and the thermal conductivity of various titanium alloys is about 50% lower than the thermal conductivity of titanium.

Changsha Samy Instrument Equipment Co.,Ltd has been registered since 2010.After more than ten years of development,It has become a professional high-tech company with research and development,production and sales of laboratory equipment and instruments with self-owned intellectual property rights,independent brands and independent innovation capabilities.The company's products are widely used in research institutes,universities,blood banks,hospitals,biological products,pharmaceuticals,biochemical testing.