GP45-2
Free Commissioning and Training on Site
1 Year or 2000 Working Hours
CE, RoHS, ISO 9001:2000, ISO 9001:2008
New
AC Motor
<100mm
<100m
Button Bit
Feeding+Rotating+Percussion
45mm-89mm
3365 mm 3975 mm
Epiroc or Montabert
Yanmar
Weg
5217mm 5827mm
GRANDPLAN
Standard Export Packing
40' HQ container
China
8430490000
Product Description
Telescopic Double boomer/twin-boom hydraulic drilling jumbo for mining use


Specification:
HC109 hydraulic drifter
Shank adapter R38/45
Height over drill centre 95.5mm
Impact power 18.8 kW
Impact rate 47Hz
Hydraulic pressure 135bar
Rotation system Separate rotation
Rotation speed 145rpm
Rotation torque, max 960Nm
Lub. air consump. at 3bar 5 l/s
Water consumption 25L/min
Weight 142 kg
HT Series Feeds
HTA HTB
Total length 5217mm 5827mm
Drill steel length 3700 mm 4305mm
Hole depth 3365 mm 3975 mm
Weight, incl. drill , kg 595 kg 620 kg
Feed force 15.0 kN 15.0 kN
Telescopic Boom
Feed extension 1250mm
Boom extension 1250mm
Parallel holding complete
Feed roll-over 360 degrees
Max. lifting angle +65 degrees/-30 degrees
Max. swinging angle ±35 degrees
Weight, boom only 1850kg
Hydraulic system
Hydraulic pumps ..............2 separate units, one for each boom
Pumps unloaded at start
System pressure, max ............................................150~230 bar
Hydraulic oil tank, volume max/min ................................195 L
Oil temperature gauge on oil tank
Water cooled oil
Filtration .........................................................................20μm
Mineral hydraulic oil
Two operator control panels
Air system
Compressor capacity, max at 7 bar ................................12.5 l/s
Air pressure gauge
Water system
water booster pump CDL8-16
Water booster pump max capacity at 13.5 bar ..........100 l/min
Min water inlet pressure ............................................2 bar
Engine
YC4D water-cooling diesel engine
Power rating at 2 300 rpm ................................70 kW
Torque at 1 500 rpm ..........................................340 Nm
Carrier
Articulated steering ± 39 degrees steering angle
Fixed seat for tramming
Four-wheel drive
Hydrostatic power steering system
Front axle .................................... ........... Dana 176
Rear axle ................................... ........... Dana 176, ±8 degrees oscillation
Automatic differential lock on rear axle
Electrical system
Total installed power ..............................................125 kW
Main motors ............................................................2 x 55 kW
Voltage ..................................................... ...............380ν (customized)
Frequency ................................................................50Hz
DIMENSIONS AND WEIGHT
Width 1990mm
Height with cabin 3050mm
Height roof up/down 2800/2300mm
Length with HTB feeds 11800mm
Ground clearance 275mm
Total 19000 kg
Side view

Coverage area, cross sections up to 45 m²


Main components of GP45-2 Hydraulic Drilling Jumbo




Specification:
HC109 hydraulic drifter
Shank adapter R38/45
Height over drill centre 95.5mm
Impact power 18.8 kW
Impact rate 47Hz
Hydraulic pressure 135bar
Rotation system Separate rotation
Rotation speed 145rpm
Rotation torque, max 960Nm
Lub. air consump. at 3bar 5 l/s
Water consumption 25L/min
Weight 142 kg
HT Series Feeds
HTA HTB
Total length 5217mm 5827mm
Drill steel length 3700 mm 4305mm
Hole depth 3365 mm 3975 mm
Weight, incl. drill , kg 595 kg 620 kg
Feed force 15.0 kN 15.0 kN
Telescopic Boom
Feed extension 1250mm
Boom extension 1250mm
Parallel holding complete
Feed roll-over 360 degrees
Max. lifting angle +65 degrees/-30 degrees
Max. swinging angle ±35 degrees
Weight, boom only 1850kg
Hydraulic system
Hydraulic pumps ..............2 separate units, one for each boom
Pumps unloaded at start
System pressure, max ............................................150~230 bar
Hydraulic oil tank, volume max/min ................................195 L
Oil temperature gauge on oil tank
Water cooled oil
Filtration .........................................................................20μm
Mineral hydraulic oil
Two operator control panels
Air system
Compressor capacity, max at 7 bar ................................12.5 l/s
Air pressure gauge
Water system
water booster pump CDL8-16
Water booster pump max capacity at 13.5 bar ..........100 l/min
Min water inlet pressure ............................................2 bar
Engine
YC4D water-cooling diesel engine
Power rating at 2 300 rpm ................................70 kW
Torque at 1 500 rpm ..........................................340 Nm
Carrier
Articulated steering ± 39 degrees steering angle
Fixed seat for tramming
Four-wheel drive
Hydrostatic power steering system
Front axle .................................... ........... Dana 176
Rear axle ................................... ........... Dana 176, ±8 degrees oscillation
Automatic differential lock on rear axle
Electrical system
Total installed power ..............................................125 kW
Main motors ............................................................2 x 55 kW
Voltage ..................................................... ...............380ν (customized)
Frequency ................................................................50Hz
DIMENSIONS AND WEIGHT
Width 1990mm
Height with cabin 3050mm
Height roof up/down 2800/2300mm
Length with HTB feeds 11800mm
Ground clearance 275mm
Total 19000 kg
Side view

Coverage area, cross sections up to 45 m²


Main components of GP45-2 Hydraulic Drilling Jumbo
No. | Item | Model | Manufacturer /Brand |
1) | Hydraulic drifter | HC109 | MONTABERT, France |
2) | Main pump | SAUER, U.S.A. | |
3) | Main valve | PARKER, USA | |
4) | Electric motor | 55kw | WEG, China |
5) | Diesel engine | YC4D, 70kw | Yuchai , China |
6) | Tyre | 12.00-20 | Tianjin international |
7) | Water pump | CDL4-16 | NANFANG, China |
8) | Air compressor | 0.7 m³/min | China |
9) | Hydraulic oil cooler | HEX422 | Hydec, Gemany |
10) | Hose | Shenyang (ISR) China | |
11) | Cable | 3X35+1X10 mm² | China |
12) | Steel rod and bit | LHS, China | |
13) | Valve block | SUN, U.S.A. |

