Audited Supplier
2070
No
No
N/a
Glass Ink
Customize
Liquid
Spray
Film Forming Matter
Acrylic
Finish Coat
ISO9001
Glass
1 year
Conversion Type
Plastic Drum
680-720°
Roller Coating
Appliance Glass, Electronic Glass, Furniture Glass
Natural Drying 4h
12 Months
Kinno
Plastic Drum
25kg/drum
China
Product Description
Water-based Glass Ink 2070
This series of inks is specially used in high-end home appliance glass, furniture glass and high-end glass printing fields.
2070 can be coated and printed by roller coating, drenching, silk screen printing and other methods, which has the characteristics of good covering effect, acid and alkali resistance, smooth surface effect, impact resistance and so on.
This series of inks is specially used in high-end home appliance glass, furniture glass and high-end glass printing fields.
2070 can be coated and printed by roller coating, drenching, silk screen printing and other methods, which has the characteristics of good covering effect, acid and alkali resistance, smooth surface effect, impact resistance and so on.
Main Features
Made of imported raw materials, green and environmentally friendly, low odor, non-toxic and harmless, better covering power and darker black than traditional inks. Use tap water to wash the net directly, less odor and lower cost. Avoid the harm to the human body caused by using benzophenone-based net washing water, which is more environmentally friendly. Can pass ROHS and REACH testing standards, environmental protection meets EU standards, and can provide SGS test reports.
Technical Data Sheet
| Tempering temperature | 680-720 ° |
| Average particle size of glaze | ≥ 3um |
| Thermal expansion coefficient | (78~85) * 10-7/K (50-300 °) |
| Screen printing | It is recommended to use mesh 79-100T (200-250 mesh) |
| Roller coating printing | It is recommended to use a 45 wire silicone roller. |
| Drying time | Natural air drying for 4 hours, drying at 150-180 ° C for 8 minutes |
| Ball drop test | The 500G steel ball falls freely at a height of 1 meter, and the glass does not break. |
| Foshan Faxus New Material Company Limited |
| Please be noticed that the information and testing results represent above is for reference only. Results and figures above will be changed based on different testing conditions. Customers are suggested to design and test the product formula based on the actual conditions of production properties. |
Printing environment and operation:
Maintaining a clean printing environment during printing can ensure product quality. Generally, the printing temperature is controlled at around 25 ° C.The factory viscosity of general glaze is 50-60Pa. s. During the printing process, if it is found that the screen printing is not smooth, a small amount of diluent can be added to the glaze and thoroughly stirred before continuing to use.
Packaging specifications and storage time:
25KG/barrel * sealed storage period of 12 months
