The boutique Stainless Steel Seamless Pipe,Surface With Shot Blasting /Shot Peening process

Product Name	Stainless Steel Seamless Pipes /Tubes Труба Сталь конструкционная криогенная Tubería de acero inoxidable sin costura Tubos de Aço Inoxidável sem Costura
Company Inform	1.Name:WENZHOU GUOHAO STEEL., LTD  2.Type: Manufacturer
Material	Austenitic: TP304, TP304L, TP304H, TP309S, TP310S, TP316L, TP316Ti, TP317L, TP321, TP321H, TP347H , 904L, 254SMO GOST Grade: 08х18н10т,12х18н10т(AISI 321), 10х17н13м2т(AISI 316Ti), , 20х23н18(AISI 310S), 06хн28мдт(AISI 904L), 08х18н10(AISI304) EN Grade: 1.4301,1.4306,1.4311,1.4541,1.4401,1.4404,1.4550,1.4571,1.4429,1.4435,1.4436,1.4439
	Duplex Stainless: UNS S31803,UNS S2205,UNS S32750, UNS S32760
	Nickel Alloy: Incoloy: 800/800H/800HT 825 926 20 28 201 200 Inconel :718 600 601 625 Hastelloy: C-22 C-276 B-2 B-3 Monel:Monel400,K-500 High-Temperature Alloys:GH3030 Gh3039 Cr20Ni80
Standard	ASTM A312,ASTM A213,ASTM A269,ASTM A511,ASTM A789,ASTM A790 ASTM B161 B163 B165 B167 B407 B423 B444 B622 B677 B729 B983 EN 10216-5,DIN 17456 GB/T 14976,GB13296,GB/T21833,GB/T 15011,GB/T 15062 GOST 9940,GOST 9941
Specification	D(Outer Diameter)	6mm-630mm ; 1/8inch-24inch
	T(Wall Thickness)	1mm-40mm ;  SCH5S, SCH10S, SCH40S, SCH80S, SCH160, SCHXXS
	L(Length)	Random length 5~7m Fixed length 6m /6.096m /6.1m/12m  or as customer's actual request
Surface	Annealing&Pickling Polishing(180#-600#) Bright Annealing Sand Blasting Shot Blasting/Shot Peening
Pipe End	Plain End (PE) Bevel End (BE) Thread End (TE)
Markings	Markings will adhere to prescribed specifications in A999/A999M and shall include the NPS or OD and schedule number or average wall thickness, heat number, and NH (when hydraulic test is not performed) and ET (when eddy-current testing is performed) or UT (when ultrasonic testing is performed). The marking shall also include the manufacturer's private identifying mark, the marking requirement of section 12.3 on Hydraulic or Nondestructive Electric Test, if applicable, and whether seamless (SML), welded (WLD), or heavily cold-worked (HCW). For Grades TP304H, TP316H, TP321H & TP347H, the marking shall also include the heat number and heat-treatment lot identification.
Flattening Test	For material heat treated in a continuous furnace flattening tests shall be made on a sufficient number of pipes to constitute 5% of the lot, but in no case less than 2 lengths of pipe.
Hydraulic Test or Nondestructive Test	Each pipe shall be subjected to the nondestructive test(ET/UT) or the hydraulic test(HT).
Delivery Time	For ready stock :7 days after receiving the deposit of T/T For MTO: 35 days after receiving the  deposit of T/T
Trade Terms	EXW,FOB, CFR, CIF etc.
Loading Port	Ningbo/Wenzhou/Shanghai
Remittance method	TT/LC/CASH
Container	20ft GP:5898mm(Length)x2352mm(Width)x2393mm(High) 24-26CBM 40ft GP:12032mm(Length)x2352mm(Width)x2393mm(High) 54CBM  40ft HC:12032mm(Length)x2352mm(Width)x2698mm(High) 68CBM
Referenced Documents	ASTM Referenced Standards A262 Practices for Detecting Susceptibility to Intergranular Attack in Austenitic Stainless Steels A370 Test Methods and Definitions for Mechanical Testing of Steel Products A941 Terminology Relating to Steel, Stainless Steel, Related Alloys, and Ferroalloys A999/A999M Specification for General Requirements for Alloy and Stainless-Steel Pipes A1016/A1016M Specification for General Requirements for Ferritic Alloy Steel, Austenitic Alloy Steel, and Stainless-Steel Tubes E112 Test Methods for Determining Average Grain Size E381 Method of Macroetch Testing Steel Bars, Billets, Blooms, and Forgings E527 Practice for Numbering Metals and Alloys in the Unified Numbering System (UNS)

Dirty, oxidized or otherwise unfinished material is undesirable for many reasons. Material that is covered in mill scale, dirt, and other debris is generally aesthetically displeasing. Oxidized material may present problems with fabrication processes such as welding or machining. Applying a coating to unclean materials can cause a lack of adhesion. Sharp burrs and edges can cause lacerations. For these reasons and many more, materials often need to be cleaned prior to many different types of manufacturing processes. While methods range from simply wiping a metal down with a rag to immersing materials in a bath of complex chemical combinations, one of the most effective and popular ways to clean dirty or oxidized material is by shot blasting it.

What is Shot Blasting?
Shot blasting is a mechanical cleaning process that uses spheres of material to remove oxides and other debris from the surface of another material. Although less commonly mentioned than sandblasting, shot blasting belongs in the same family of abrasive blasting processes in which sandblasting is categorized. The main difference between shot blasting and sandblasting is that shot blasting uses spherical shot as an abrasive media and a centrifugal wheel for propulsion, while sandblasting uses grains of sand and almost exclusively uses compressed air for propulsion.

How Does Shot Blasting Work?
Shot blasting works by propelling round materials known as shot media against a surface which in turn removes the contaminants of the surface and also can improve its finish. What type of shot media is used is a very important decision for the shot blasting process. The size and hardness of the shot material will dictate how much surface removal of the material being cleaned will occur. The type of material being cleaned will also play a role in the effectiveness of the shot blasting process. Typically, the shot material and size will be selected depending on the composition of the material whose surface is being shot blasted.
Another important part of the shot blasting process is the propulsion method and the resulting velocity of the shot material. The most common way to propel the shot blasting media is through the use of a centrifugal wheel. To propel the shot blasting media, it is unloaded into a centrifugal wheel. Once the shot blast material has been accelerated by the wheel to the desired velocity, it is expelled from the wheel and into the shot blasting gun. Then the operator or machine holding the shot blasting gun directs the flow of the shot media to clean the material surface.
Many shot blasting equipment cells also include a recovery system. The shot blast recovery system will collect the material shot that has already been propelled and impacted against the material being cleaned and return it to the propelling device to be used again. Shot blast recovery is typically performed through the use of a vacuum.

What Materials Can Be Shot Blasted?
There are many materials that can be cleaned by shot blasting. These include, but are not limited to:
Carbon Steel
Alloy Steel
Stainless Steel
Cast Iron
Titanium
Copper
Concrete
Certain types of ceramics

Chemical Composition & Mechanical Perofrmance Austenitic stainless steel and duplex stainless steel pipe