Thermal Overload Relay with High Breaking Capacity

Price $3.00 Compare
Min Order 100 Pieces
Shipping From Zhejiang, China
Popularity 374 people viewed
Quantity
+-
 

Wenzhou Juhong Electric Co., Ltd.

VIP   Audited Supplier 5 years
Profile Certified by SGS/BV
JLR2-D
Thermal Relay
Household Appliances Relay
1
Ac
3
Medium Power Relay
Over Load Protetion
Electromagnetic Type
Miniature
Thermal Overload Relay
Thermal Relay
Thermal Overload
CNJUHO
Cartons
silver contact point
Zhejiang
8536490000
Product Description

1.Application:
JRS4-d range thermal overload relay is used in AC 50Hz (or 60Hz); rated voltage is up to 660V, for protecting AC motor against overload or phase-breaking.
Product feature △ Delta bimetallic strip; △ three phase; △ trip level "10"; △ with setting current regulating device; △ with ambient air temperature compensation; △ with phase failure protection; △ manual and automatic reset; △ with trip indication; △ the auxiliary contact is a normally open contact and a normally closed contact separated electrically; △ there is a normally closed contact breaking button; △ There is a mechanism detection button.
Applied environment △ Ambient temperature:-5ºC-+40ºC; △ Air condition:be able to bear the influence of moisture in the air,salt fog,mould,humid air on the sea; △ Tilt and vibration:all direction should low than 22.5ºC; △ Vibration:It can be mounted on devices with 2-13.2Hz frequency,±1mm anplitude,13.2-80Hz frequency and ±7m/s accelerated speed. △Power voltage and frequency changes:steady-state voltage area is+6%- -10% of rated voltage,steady-state frequency change area is±5% of rated frequency; △The inclined angle between the mounting surface and vertical surface
no more than 5 °,located on the place of non-sensible compact and vibration.

2.Technical Parameter

Model Name

 

protection relay

Standard

 

IEC60947-4-1

Setting current multiple

 

1.05, 1.2, 1.5, 7.2

Rated current In(A)

 

25 36 93Amp

Rated voltage Un(V)

 

230V 240V 380V

Frequency of coil

 

50Hz, 60Hz, 50/60Hz

Number of auxiliary contact

 

10 /01 /11

Protection grade

 

IP20

Pollution grade

 

3

3.Main parameter

Type
Parameter
JRS4-09d-25d
JRS4-32d
JRS4-40d-80d
JRS4-140d
Rated Insulation voltage Ui V
690
-5-40
Ambient temperature(ºC)
≤2000
Elevation
Relative humidity not exceeding 50% at the ambient temperature 40ºC humidity up to 90% at the ambient temperature 20ºC
Environment
690
Standard
IEC60947-4 EN60947-4
Pollution grade
Grade 3
Our frame protection
IP10
Connect minimum load of attached circle
24V 100mA
Lead No.Of main circuit connect terminal
Solft wire(mm2)
4
10
16
-
Hard wire(mm2)
6
16
25
50
root
2
2
1
1
4.We commit:
5.Shipping:

Message Type
* Message Content
* Name  
* Phone
* Email
* CAPTCHA