Audited Supplier
E. 950.20.00. B
Standard
Sealed On Both Sides
Single-Row
Four Point Contact Ball
50mn, 42CrMo
External Gear
Since Year 1993
Lyhy
Available
572mm
742.3mm
56 Mm
in House or Third Party (SGS, BV)
1 Year
20-30 Days
None Gear
LYHY
Wooden Box
ISO9001: 2008
China
848210900
Product Description
Production Description
Technical parameter for four point contact ball ring bearing, slewing ring bearing, swing Bearing, slewing gear
| Model | Dimension(mm) | ||
| Da | Di | H | |
| (Serie E.20.B) external gear | |||
| E.505.20.00.B | 503.3 | 342 | 56 |
| E.650.20.00.B | 640.3 | 472 | 56 |
| E.750.20.00.B | 742.3 | 572 | 56 |
| E.850.20.00.B | 838.1 | 672 | 56 |
| E.950.20.00.B | 950.1 | 772 | 56 |
| E.1050.20.00.B | 1046.1 | 872 | 56 |
| E.1200.20.00.B | 1198.1 | 1022 | 56 |
| (Serie E.25.B) external gear | |||
| E.900.25.00.B | 898 | 655 | 80 |
| E.1000.25.00.B | 997 | 755 | 80 |
| E.1100.25.00.B | 1096 | 855 | 80 |
| E.1200.25.00.B | 1198 | 955 | 80 |
| Model | Dimension(mm) | ||
| Da | Di | H | |
| (Serie I.20.B) internal gear | |||
| I.486.20.00.B | 486 | 325 | 56 |
| I.616.20.00.B | 616 | 444 | 56 |
| I.716.20.00.B | 716 | 546 | 56 |
| I.816.20.00.B | 816 | 648 | 56 |
| I.916.20.00.B | 916 | 736 | 56 |
| I.1016.20.00.B | 1016 | 840 | 56 |
| I.1166.20.00.B | 1166 | 984 | 56 |
| (Serie I.25.B) internal gear | |||
| I.900.25.00.B | 855 | 610 | 80 |
| I.1000.25.00.B | 955 | 710 | 80 |
| I.1100.25.00.B | 1055 | 810 | 80 |
| I.1200.25.00.B | 1155 | 910 | 80 |
| Model | Dimension(mm) | ||
| Da | Di | H | |
| (Serie SD.20.B) none gear | |||
| SD.486.20.00.B | 486 | 342 | 56 |
| SD.616.20.00.B | 616 | 472 | 56 |
| SD.716.20.00.B | 716 | 572 | 56 |
| SD.816.20.00.B | 816 | 672 | 56 |
| SD.916.20.00.B | 916 | 772 | 56 |
| SD.1016.20.00.B | 1016 | 872 | 56 |
| SD.1166.20.00.B | 1166 | 1022 | 56 |
| (Serie SD.25.B) none gear | |||
| SD.855.25.00.B | 855 | 655 | 63 |
| SD.955.25.00.B | 955 | 755 | 63 |
| SD.1055.25.00.B | 1055 | 855 | 63 |
| SD.1155.25.00.B | 1155 | 955 | 63 |
About LYHY bearings
1.introduction:we are a manufacturer of slewing bearing since 1993, our factory occupies a area of 30000square meters with 4 workshop and 1 office building.
2. Featured products: slewing bearing and slewing drive
3. Capital: Current is 1 million RMB, but we are increasing the capital to 10 million RMB
4. Workers: 40
5. Certificate: ISO9001:2008, 3.1 certificate, CCS certificate, Science and Technology Progress Award
6. Annual Exportation: 8million USD
7. Exported countries: (39)
Asia: India, Pakistan, Iran, Signore, Georgia, Malaysia, Vietnam, Thailand, Philippines, Israel, Korea, UAE, Sri Lanka, Saudi Arabia,
Europe: Turkey, Russia, Spain, Czech Republic, Italy, Poland, Slovakia, Bosnia and Herzegovina, Austria, France, Germany, Switzerland, Finland, Ukraine, UK
America: USA, Canada, Mexico, Brazil, Puerto Rico, Peru, Chile
Africa: South Africa, Egypt
Oceania: Australia
LYHY bearings main products
Production Process of LYHY slewing bearings
Quality Control Process of LYHY slewing bearings
Slewing Bearing Indroduction
Single row ball slewing ring bearing
1. Introduction of LYHY single row ball slewing bearings
LYHY is a professional manufacturer in slewing ring bearings since 1993. We can also design and make other standard and non-standard ball bearings, roller bearings and precision bearings as per customer's different technical requirements.
Slewing bearing is also called slewing ring, slewing ring bearing, turntable bearing, and rotary bearing.
The single row ball slewing ring bearing is composed of 2 seat-rings. The balls contact with the circular race at four points, via which the axial force, radial force and resultant moment may be born simultaneously.
2. Structure:
Single row ball slewing bearing has three different types:
Single row ball slewing bearing with no gear
Single row ball slewing bearing with external gear
Single row ball slewing bearing with internal gear
3. Features
Single row ball slewing ring bearings have following features:
Compact in structure and light in weight.
4. Application:
Single row ball slewing ring bearings are widely used in slewing conveyers, welding arm and positioned, medium duty cranes, excavators and other engineering machines
5. Structure of LYHY slewing bearings
Slewing ring bearings have different types as per different structures:
Single row ball slewing bearings
Double row ball slewing bearings
Crossed roller slewing bearings
Triple row roller slewing bearings
Flange slewing bearings
6. Why choose LYHY slewing bearings
A pioneer in slewing bearing field, rich experience, can do design, produce, mounting guide
Small order accepted
SO certified company
Variorum models
7*24hours hotline to help you with your cranes
Strict quality control system to ensure quality for slewing bearing
7. Packaging Details for large diameter slewing bearing with pinion
1). Bearing surface is covered with the anti-rust oil first; And then wrapped with the plastic film;
2). And then packed with Kraft paper and professional belts;
3). At last, with wooden box totally at the outer packing to invoid the rust or the moist;
4). We can depend on the customers demand to be packed;
Transportation:
All LYHY slewing ring bearings can be usually delivered timely, usual production time is 15-50 days based on different slew bearings diameters, sometimes slew rings will be in stock.
Slewing bearings can be offered different delivery terms, such as EXW, FOB, CIF, DDU and so on.
Also, slewing rings can be transported by different transport ways, by express (such as DHL, TNT, UPS, FEDEX and so on), by air, by sea, by truck, by railway and so on.
8. We can manufacture replacement Slewing ring bearing for Torriani models:
Flange slewing bearing: External gear internal flange
E. 505.20.00. C, E. 505.20. C, E. 650.20. C, E. 750.20.00. C, E. 850.20.00. C, E. 950.20.00. C,
E. 1100.32.00. C, E. 1050.20.00. C, E. 1200.32.00. C, E. 1200.20.00. C, E. 1300.32.00. C,
E. 1400.32.00. C, E. 1500.32.00. C, E. 1600.32.00. C
Flange slewing bearing: Internal gear external flange
I. 505.20.00. C, I. 650.20.00. C, I. 750.20.00. C, I. 850.20.00. C, I. 950.20.00. C, I. 1100.32.00. C,
I. 1050.20.00. C, I. 1200.32.00. C, I. 1200.20.00. C, I. 1300.32.00. C, I. 1400.32.00. C, I. 1500.32.00. C, I. 1600.32.00. C
Flange slewing bearing: Internal and external flange
SD. 505.20.00. C, SD. 650.20.00. C, SD. 750.20.00. C, SD. 850.20.00. C, SD. 950.20.00. C, SD. 1050.20.00. C,
SD. 1200.20.00. C, SD. 1100.32.00. C, SD. 1200.32.00. C, SD. 1300.32.00. C, SD. 1400.32.00. C, SD. 1500.32.00. C,
SD. 1600.32.00. C
Four point contact ball slewing bearing: Serie I. 22. A-T
I. 400.22.00. A-T, I. 500.22.00. A-T, I. 700.22.00. A-T, I. 800.22.00. A-T, I. 880.22.00. A-T, I. 1000.22.00. A-T, I. 1100.22.00. A-T
FAQ:
Q: Are LYHY BEARINGS trading company or manufacturer?
A: LYHY BEARINGS is a professional manufacturer for slewing bearings, thin section bearings, ball bearings and rolling bearings
Q: How do LYHY BEARINGS control quality of their bearing?
A: LYHY BEARINGS has established strict quality control systems, all the products and services has passed ISO9001-2008 Quality Certificate and third party such as CCS, LR,ABS,BV
Q: What is the MOQ?
A: MOQ is 1pc, pls message us for detailed information.
Q: How about the package for LYHY bearings?
A: Standard Industrial packing in general condition (Plastic tube+ professional plastic belts+ plywood case). Accept design package when OEM.
Q: How long is the production time?
A: It takes about 7-40 days, depends on the model and quantity.
Q: How about the shipping?
A: We can arrange the shipment or you may have your own forwarder.
Q: Is sample available?
A: Yes, sample order is acceptable.
Q: Can we use our own LOGO or design on bearings?
A: Yes. OEM is acceptable for LYHY BEARINGS. We can design as per your requirements and use your own LOGO and package design.
INSTALLATION OF LYHY SLEWING BEARINGS
Preparation:
Make sure that the model is correct and slewing bearing isn't damaged during transportation.
2. Check the appearance and rotational state of the bearing, such as rotational precision clearance, rotating flexibility, seals position, lubrication grease etc.
3. The installation datum plane and bracket installing plane should be clean, grease, burr, paint and other foreign body should be wiped off.
Installation:
1. The screws in the installing plane should be fit with the mounting holes in the slewing bearing
2. The slewing bearing has a soft zone marked with an "s" on the upper surface, when installing the bearing, it is important to ensure that this area is placed in a non-load or infrequent load zone.
3. When the bearing is placed on the supporting frame work it is important to check the interface between these two surfaces. This check should be carried out with the insertion of feel gauges between the two surfaces. If a gap should exist then it is recommended to plane/resurface the effective area so as to remove the gap.
4. Install slewing bearing with high strength screws, and choose appropriate strength bolts. All bolts are required to be tightened evenly. The sequence of this tightening process is shown in Pic. Welding of bearing is not allowed, in the event of welding any adjacent parts, heat transfer shall be avoided so as to cause the bearing to become deformed or change the hardness.
5. After installation, the bearing should be rotated to check for smooth operation and any emission of unusual noise. If either of the aforementioned are noted, then the bearing should be adjusted to eliminate them. The teeth of the largest run-out are coated with green paint.
