Touch Screen High Speed Centrifuge

 1.Microcomputer control, large screen true color LCD display, full touch screen operation interface; Directly set the working program, centrifugal force, speed, centrifugal time, temperature, lifting speed and the rotor type LCD display  

 2.No carbon brush AC frequency conversion motor drive, using a special drive module to ensure the reliability of the circuit  

 3.Double door lock system, automatically lock the door after starting, to ensure safe operation  

 4.20 kinds of work program selection, users can freely program, call its set working parameters, easy to use, improve work efficiency  

 5.15 kinds of acceleration /15 kinds of deceleration options, users can arbitrarily set one group of speed up and down according to sample requirements  

 6.With constant speed timing (atsetrpm), start timing two functions, the point is instantaneous high center (shotspin) function  

 7.Differential centrifugation: Reserve 5 differential centrifugation procedures, users can set according to demand  

 8.Double steel structure, stainless steel centrifugal chamber, to avoid corrosive substances  

 9.Automatic balance, unbalanced protection;  Error or imbalance alarm signal prompt, and automatic stop  

 10.Parameters can be arbitrarily changed during operation without stopping  

 11.Fastest speed up and down time <15s[H0512]  

 12.SOFT has soft brake function, which can effectively prevent sample resuspension and protect sensitive samples;  Multistage damping damping   design to ensure the centrifugal effect of the sample  

 13.Countdown function: countdown in seconds, real-time display of remaining working time  

 14.The centrifugal chamber has a condensate drainage hole to prevent water in the chamber  

 15."Standby Cooling" pre-cooling function: in the standby state, it can be pre-cooled to the set temperature continuously  

 16.Standby function: When the compressor is reduced to the set temperature, it will automatically standby, reduce energy consumption, and extend the life of the compressor  

 17."Fast Cool/Quick Lock" fast cooling function, from room temperature 21°C to biological zero 4°C ≤5 minutes  

 18.Rotor can be autoclaved at 121ºC for more than 2 hours, air tight Angle rotor, high biosafety  

 19.Automatic identification of magnetic rotor, no manual setting of rotor model (2012HR needs to be set in the interface), overspeed protection  

 20.Imported compressor, no fluorine refrigeration  

 21.Customized 485 communication interface, remote control [optional]