Audited Supplier
GT560MM
Included
Electric
New
CCC, PSE, RoHS, ISO, CE
12 Months
No Screw
Siemens
NSK
Airtac
Ritta
European
Italy or China
GOLDEN TECHNOLOGIES
Export Standar Packing
GT560MM Triple twister
Dongguan of China
84772090
Product Description
(1)APPLICATION:
This machine consists of Up single twisting with back twisting, and Down pair twisting. Apply for LAN cable CAT5/5E/6/6E/7core pair twisting, backtwisting Ratio can be set from 0-100% (non physical backtwisting). Moreover, machine can run full speed 6000TMP/Min with high quality. Its efficiency more than 50% comparing traditional pair twisting machine.
This machine featured with high speed, take up tension steady, simple operation, save labor cost, standard parts all imported brand with excellent quality, long time for use.
Main body adopt high quality steel for welding, whole body with dig and bored treatment, easy for installation and operation.
Technical Parameter:
(4)ABOUT US
1. We produce all kinds of cable / wire making / processing equipment and accessories.
2. We are the leading manufacturer of any kinds of complete wire and cable extrusion line in China since 2004.
3. We supply best after-sales service: Install / commissioning / after-sales service.
4. Our machine has exported more than 63 different countries,like Germany,Poland,Italy,Russia,etc.
5. Electrical parts are used the international qualified brand, like Siemens, ABB, etc.
(5)HOW TO REACH OUR FACTORY:
1.Only 35 minutes from Guangzhou city to Dongguan city by high speed train.
2.Just 40 minutes from Shenzhen city to Dongguan city by high speed train.
3.Total 1.5 hours by car from Guangzhou airport to our factory .
4.Only 1 hour by car from Shenzhen airport to our factory.
This machine consists of Up single twisting with back twisting, and Down pair twisting. Apply for LAN cable CAT5/5E/6/6E/7core pair twisting, backtwisting Ratio can be set from 0-100% (non physical backtwisting). Moreover, machine can run full speed 6000TMP/Min with high quality. Its efficiency more than 50% comparing traditional pair twisting machine.
This machine featured with high speed, take up tension steady, simple operation, save labor cost, standard parts all imported brand with excellent quality, long time for use.
Main body adopt high quality steel for welding, whole body with dig and bored treatment, easy for installation and operation.
Technical Parameter:
| S/N | Description | Parameter |
| 2.1 | Max payoff wire diameter range(mm) | Ф0.32mm-Ф1.2mm |
| 2.2 | Max.back Rotation rate | 2000rpm/min(2000jiont) |
| 2.3 | Capstan power | 0.75KWServo control |
| 2.4 | Wire brake control | Motor& accumulate tension device |
| 2.5 | Bobbin size | Ф500*300mm*Ф56 |
| 2.6 | Pitch range | 5mm-50mm |
| 2.7 | Back twisting Range(%) | 2%-100% |
| 2.8 | Max. finish Diameter after twisting(mm) | Ф2.5mm |
| 2.9 | Max. back rotation speed(rpm) | 2000RPM(4000TPM) |
| 2.10 | Capstan motor | 550W+ Turbine gear box |
| 2.11 | Bobbin size | Ф560*375mm*Ф56mm |
(4)ABOUT US
1. We produce all kinds of cable / wire making / processing equipment and accessories.
2. We are the leading manufacturer of any kinds of complete wire and cable extrusion line in China since 2004.
3. We supply best after-sales service: Install / commissioning / after-sales service.
4. Our machine has exported more than 63 different countries,like Germany,Poland,Italy,Russia,etc.
5. Electrical parts are used the international qualified brand, like Siemens, ABB, etc.
(5)HOW TO REACH OUR FACTORY:
1.Only 35 minutes from Guangzhou city to Dongguan city by high speed train.
2.Just 40 minutes from Shenzhen city to Dongguan city by high speed train.
3.Total 1.5 hours by car from Guangzhou airport to our factory .
4.Only 1 hour by car from Shenzhen airport to our factory.
