Audited Supplier
Tungsten carbide coating machine Titanium Nitride Coating Equipment PVD Coating Machine Stainless Steel
Application Field
It applies to hardware,glass crafts,ceramic crafts,such us watches,mobile phone metal shell,sanitary
ware,mould,electronic products,crystal glass, glasses, cutlery, knives and so on. You can make super-hard wear-resistant film coating, anti-corrosion film, decorative film(gold color,rose gold,coffee,brown,bronze,blue,black,white,gray and other colors),it combined with magnetron sputtering technique can be plated the multilayer composite membrane and manufactured plated stainless steel, aluminum, titanium, tungsten and other metal films may be manufactured as coated TIN, TIC, TICN, TIALN, CRN, CU, AU, diamond film (DLC), decorative film metal, film and non-metallic composite coating film and its compounds film.
Main Feature
1. It equipments cryogenic ion secondary source, some substrate without heating the material, It can directly do the cold plating film at room temperature, save energy, increase productivity.
2. The maximum of the temperature for tool coating chamber can 600 degrees, In addition to the tool Coater coating applications require heating device, other applications do not need the device.
3. High deposition rate, High coating speed, It can be widely used to do the decorative coating, functional coating on a variety of products. So it is a ideal equipment to do the high-grade and best coating for mass production.
4. Magnetron sputtering principle is based on the theory of the cathode glow discharge, it expend the cathode surface magnetic field near the work piece surface. Then it improves the sputtered atom ionization rate. It keeps the magnetron sputtering uniformity, also can improve the surface shining effect.
5. The arc plasma evaporation source is reliable, it can work under 40A current in optimizing the cathode and the magnetic field structure,. It will happen atomic diffusion between the coating and the material. It also has the advantages that lon Beam Assisted Deposition.
6. Vacuum pumping system, electric control system and complete vacuum coating system can be customized according to user requirements.
- Chamber size: φ 600mm-φ1800mm(Can be customized)
- 3-point vacuum level measuring,2-point temperature measuring
- High power ion source achieving uniformed, larger ion deposition distribution over a larger area at high ion current density.
- Different metal and alloy layers can be deposited by multi arc sources
- Auto-deposition control system for fully automated process.
- Center-driving or planetary substrate dome is selectable.
- Diffusion pump(or turbo molecular pumps) plus mechanical pumps for high vacuum pumping
Specifications
| Model | ARC series |
| Vacuum Chamber | SUS304, φ600mm-1800×600-2000mm (H) |
| Substrate Dome Size | Depends on the customer's needs |
| Substrate Dome Rotation Speed | 10 rpm to 50 rpm (Variable) |
| Arc Evaporation Source | From 2 to 16 sets |
| Vacuum System | Roughing Pump, Diffusion Pumps or Turbo Molecular Pump + Mechanical pumps |
Performance
| Ultimate Pressure | 5.0×10-4 Pa or lower |
| Pump Down Rate | 25 minutes (Atm. to 5.0×10-3 Pa) |
| Substrate Heater | 550 (max.) |
Utility
| Layout Dimensions | 5000mm (W)×6500mm (D)×3500mm (H) approx. |
| Power Requirements | 3-phase, 380V, 50/60Hz, 100-180kVA approx. |
| Cooling Water Flow Rate | 140/min. or greater |
| Compressed Air Pressure | 0.5MPa or higher |
| Gross Weight | 8500kg approx. |
Complete Process:
1. The inner packing is protective plastic film to protect the PVD machine from moisture and rain.
2. The out packing is plywood plate with steel to keep the PVD machine in good condition during the long distance transportation.
After the customer tested the PVD coating machine and make sure the machine is no problem, we will take the machine apart. The solid packing can make sure you will receive a machine without any destroy.
In order to help you choose the best suitable PVD coating machine, please try to reply my questions below, thanks for your cooperation.
Q1: What is your product, and the max. dimension?
Q2: The size of your processing material, your desired daily production capacity?
