Audited Supplier
w rods
Aviation, Electronics, Industrial, Medical, Chemical
GB, ASTM
>99.95%
Non-alloy
Round
Tungsten Bars
WMMP
Standard Exported Plywood Case/Wooden Packing
Dia0.3mm-100mm
China
8101991000
Product Description
99.95% Pure Tungsten Rods Bars,Tungsten Carbide Rods&Tungsten Alloy Rods Product:
Pure tungsten rod specification:
1)Tungsten rods surface finish:
Black:Surface is "as swaged" or "as drawn"; retaining a coating of processing lubricants and oxides.
Cleaned - Surface is chemically cleaned to remove all lubricants and oxides.
Ground - Surface is centerless ground to remove all coating and to achieve precise diameter control.
2)Tungsten rods available size:
Forged rods size: Diameter(2-100mm)*Length<2500mm
Strainghtened rods after drawn diameter 0.3-3.2mm
The application & features of tungsten rods:
Main Characteristics:
High melting point (3410 centigrade)
Low thermal expansion
High electrical resistance
Low vapour pressure
Good thermal conductivity
High density
Tungsten copper alloy rod Specification:
Material: W50-90Cu10-50
Brand:W55Cu45,W60Cu40,W70Cu30, W75Cu25, W80Cu20, W85Cu15, W90Cu10
Density: 11.85g/cm3-16.75g/cm3
Product standard: GB8320-87
WCu alloy foil size: Thickness(0.08-0.7mm)*Width<120mm*Length<300mm
WCu alloy sheet size: diameter(3-100mm)*L<500mm
WCu alloy rods size: dia(1.5-200mm)*L
WCu Flatness tolerance:<4um
WCuRoughness:Ra1.6-Ra0.8
WCuSurface: polished, ground.
Our Tungsten Carbide Rods Product Detail Information:
Tungsten carbide rods available types:
1) solid carbide rods
2) single central hole rods
3) double parallel hole rods
4) chamfered rods
5) Customized type rods
Tungsten Carbide rods Application:
Tungsten carbide solid rods are mostly applied for drill bits,end mills, and reamers with sub-micron grain grade YG10X, for non-ferrous precision cutting and wood cutting with grade YG6X, and for fiberglass reinforced plastics, titanium alloys, hardened steel with ultra-fine grain grade YG8X.
Tungsten carbide rod with coolant hole has a wide range of application, such as producing finished cutting tools, such as twist drills, mills, reamers, taps and burrs.
Our Tungsten Rods Packing
Standard and safe Packing
paper wrapped the sheets, then plastic paper protected from moisture
Foam board around the the inner wooden case
Standard exported plywood case outside
Our Delivery Time
Sample Delivery: 7-10 days is ok
Big order quantity: Usually we can supply within 20 days
Our Shipment Methods:
By express(EMS,TNT,DHL,UPS,FedEx)
By Sea or Air transportation
By land
By YWWEN special line or other special line
We also can deliver as the customers' need,send the material to the port.
More Tungsten rod bars product photoes,hope you are interested in them
We supply other following tungsten products,
Tungsten ribbon, foils
Tungsten bar , Tungsten rod with black surface or polished
Tungsten wire, black Tungsten wire, polished Tungsten wire, straight Tungsten wire, super thin Tungsten wire, W-Al wire
Tungsten screw, Cu-W alloy, Tungsten powder, high specific gravity Tungsten alloy materials, Tungsten part and other Tungsten products.
More information about Luoyang Mopei Tungsten&Molybdenum Material Co.LTD
The advantage of us:
1) We already have more than 11 years tungsten beads producing and exporting experience
2) Competitive price in the market,factory direct sales.
3) the whole production line from powder to finished products, top and steady quality assured
4) fast delivery and best after-sale service
5) Every month we export more beas to European,America,New Zealand,Korea etc
Pure tungsten rod specification:
1)Tungsten rods surface finish:Black:Surface is "as swaged" or "as drawn"; retaining a coating of processing lubricants and oxides.
Cleaned - Surface is chemically cleaned to remove all lubricants and oxides.
Ground - Surface is centerless ground to remove all coating and to achieve precise diameter control.
2)Tungsten rods available size:
Forged rods size: Diameter(2-100mm)*Length<2500mm
Strainghtened rods after drawn diameter 0.3-3.2mm
| Tungsten Content | Type | Diameter (mm) | Dia.Tolerance (mm) | Length (mm) | L tolerance (mm) |
| 99.95% | Sintering rod | 40-100 | ±3 | 500max | ±5 |
| 99.95% | Forged rod | 20-80 | ±2 | 800max | ±5 |
| 99.95% | Ground rod | 2-60 | ±0.1 | 600max | ±1 |
Main Characteristics:
High melting point (3410 centigrade)
Low thermal expansion
High electrical resistance
Low vapour pressure
Good thermal conductivity
High density
Tungsten copper alloy rod Specification:
Material: W50-90Cu10-50
Brand:W55Cu45,W60Cu40,W70Cu30, W75Cu25, W80Cu20, W85Cu15, W90Cu10
Density: 11.85g/cm3-16.75g/cm3
Product standard: GB8320-87
WCu alloy foil size: Thickness(0.08-0.7mm)*Width<120mm*Length<300mm
WCu alloy sheet size: diameter(3-100mm)*L<500mm
WCu alloy rods size: dia(1.5-200mm)*L
WCu Flatness tolerance:<4um
WCuRoughness:Ra1.6-Ra0.8
WCuSurface: polished, ground.
Tungsten Copper Alloy Property Brief Introduction
W-Cu heat sink material is a composite of tungsten and copper, with both tungsten low expansion characteristics, but also has copper of high thermal conductivity properties, and the tungsten and copper in the thermal expansion coefficient and thermal conductivity can be adjusted with the W-Cu composition, also the composite can be machined to various shape, these features make the application of this composite with great convenience.
1) high melting point, high strength,
2) smooth and clean surface,
3) good conductions, small linear expansion coefficient and good heat-resistance
3. Chemical composition
| Material | WCu% Tungsten Content | Hardness HB | g/ Density at 20ºC | W/M.K Thermal conductivity at 25ºC | (10-6/k) Coefficient of thermal expansion at 20ºC |
| W90Cu10 | 90 | 260 | 17.0 | 180-190 | 6.5 |
| W85Cu15 | 85 | 240 | 16.4 | 190-200 | 7.0 |
| W80Cu20 | 80 | 220 | 15.6 | 200-210 | 8.3 |
| W75Cu25 | 75 | 195 | 14.9 | 220-230 | 9.0 |
| W50Cu50 | 50 | 125 | 12.2 | 310-340 | 12.5 |
Our Tungsten Carbide Rods Product Detail Information:
Tungsten carbide rods available types:
1) solid carbide rods
2) single central hole rods
3) double parallel hole rods
4) chamfered rods
5) Customized type rods
Tungsten Carbide rods Application:
Tungsten carbide solid rods are mostly applied for drill bits,end mills, and reamers with sub-micron grain grade YG10X, for non-ferrous precision cutting and wood cutting with grade YG6X, and for fiberglass reinforced plastics, titanium alloys, hardened steel with ultra-fine grain grade YG8X.
Tungsten carbide rod with coolant hole has a wide range of application, such as producing finished cutting tools, such as twist drills, mills, reamers, taps and burrs.
Our Tungsten Rods Packing
Standard and safe Packing
paper wrapped the sheets, then plastic paper protected from moisture
Foam board around the the inner wooden case
Standard exported plywood case outside
Our Delivery Time
Sample Delivery: 7-10 days is ok
Big order quantity: Usually we can supply within 20 days
Our Shipment Methods:
By express(EMS,TNT,DHL,UPS,FedEx)
By Sea or Air transportation
By land
By YWWEN special line or other special line
We also can deliver as the customers' need,send the material to the port.
More Tungsten rod bars product photoes,hope you are interested in them
We supply other following tungsten products,
Tungsten ribbon, foils
Tungsten bar , Tungsten rod with black surface or polished
Tungsten wire, black Tungsten wire, polished Tungsten wire, straight Tungsten wire, super thin Tungsten wire, W-Al wire
Tungsten screw, Cu-W alloy, Tungsten powder, high specific gravity Tungsten alloy materials, Tungsten part and other Tungsten products.
More information about Luoyang Mopei Tungsten&Molybdenum Material Co.LTD
The advantage of us:
1) We already have more than 11 years tungsten beads producing and exporting experience
2) Competitive price in the market,factory direct sales.
3) the whole production line from powder to finished products, top and steady quality assured
4) fast delivery and best after-sale service
5) Every month we export more beas to European,America,New Zealand,Korea etc
