Audited Supplier
XH
Carbon Steel
Ventilation
Axial Flow
Low Pressure
ISO, CE, CCC, Appointed
490/590/740/980r/M
2*55-2*1250kw
10.1-462.1m³/S
9 Machine Number
559~6921 PA
Red/Yellow/Customized
Design and Technical Drawing Can Be Customized
330V/660V
6675-185583
2
Kuang Feng
Strong Wooden Case Exporting Standard
China
8414599099
Product Description
RADW series local fan
RADW series fan is a large-scale explosion-proof axial fan for mine developed by combining the parameters of ventilation network for mine. It's with the advantages of high efficiency, energy saving and low noise. The static pressure efficiency of the product can reach above 86%, and the main fan achieved the leading level in China. The adopt explosion-proof material passed the test center of the friction spark test and reached the explosion-proof requirements. This material is approved by Chinese Academy of Sciences Chongqing Branch.the whole explosion-proof performance has passed explosion-proof test by the national explosion-proof electrical product quality testing center.
ParametersType RADW-A Parameters:
| Series | No. | Volume(m³/s) | Total Pressure(Pa) | Power(KW) | Weight(kg) |
| RADW (A) -6-NO (n=980r/min) | 14 | 10.1~31.7 | 918~2888 | 2×55 | 6675 |
| 15 | 12.4~39.0 | 1054~3315 | 2×75 | 7896 | |
| 16 | 15.0~47.3 | 1199~3772 | 2×110 | 9090 | |
| 17 | 18.0~56.8 | 1353~4258 | 2×132 | 10178 | |
| 18 | 21.4~67.4 | 1517~4774 | 2×185 | 12240 | |
| 19 | 25.1~79.3 | 1690~5319 | 2×220 | 17235 | |
| 20 | 29.3~92.5 | 1873~5893 | 2×250 | 18855 | |
| 21 | 33.9~107.0 | 2065~6497 | 2×355 | 22866 | |
| RADW (A) -8-NO (n=740r/min) | 17 | 13.6~42.9 | 772~2428 | 2×55 | 9618 |
| 18 | 16.1~50.9 | 865~2722 | 2×75 | 10920 | |
| 19 | 19.0~60.0 | 964~3033 | 2×110 | 15555 | |
| 20 | 22.1~69.8 | 1068~3360 | 2×132 | 17635 | |
| 21 | 25.6~80.8 | 1177~3705 | 2×160 | 19466 | |
| 22 | 29.5~92.9 | 1292~4066 | 2×200 | 21769 | |
| 23 | 33.7~106.2 | 1412~4444 | 2×250 | 25784 | |
| 24 | 38.2~120.7 | 1538~4839 | 2×315 | 32938 | |
| 25 | 43.2~136.4 | 1669~5250 | 2×315 | 35136 | |
| 26 | 48.6~153.4 | 1805~5679 | 2×450 | 41234 | |
| 27 | 54.4~171.8 | 1946~6124 | 2×450 | 43701 | |
| 28 | 60.7~191.6 | 2093~6586 | 2×710 | 49069 | |
| RADW (A) -10-NO (n=590r/min) | 20 | 17.6~55.7 | 679~2136 | 2×75 | 16555 |
| 21 | 20.4~64.4 | 748~2355 | 2×90 | 18426 | |
| 22 | 23.5~74.1 | 821~2585 | 2×110 | 20649 | |
| 23 | 26.8~84.7 | 898~2825 | 2×132 | 22624 | |
| 24 | 30.5~96.2 | 978~3076 | 2×160 | 30038 | |
| 25 | 34.5~108.7 | 1061~3338 | 2×185 | 32436 | |
| 26 | 38.8~122.3 | 1147~3610 | 2×250 | 37334 | |
| 27 | 43.4~137.0 | 1237~3893 | 2×250 | 39801 | |
| 28 | 48.4~152.8 | 1331~4187 | 2×315 | 48909 | |
| 29 | 53.8~169.7 | 1427~4491 | 2×355 | 60771 | |
| 30 | 59.5~187.9 | 1527~4806 | 2×450 | 67447 | |
| 32 | 72.3~228.0 | 1738~5468 | 2×560 | 79121 | |
| 34 | 86.7~273.4 | 1962~6173 | 2×800 | 92227 | |
| 36 | 102.9~324.7 | 2199~6921 | 2×1000 | 105763 | |
| RADW (A) -12-NO (n=490r/min) | 24 | 25.3~79.9 | 674~2122 | 2×110 | 28738 |
| 25 | 28.6~90.3 | 732~2302 | 2×110 | 30936 | |
| 26 | 32.2~101.6 | 791~2490 | 2×132 | 33894 | |
| 27 | 36.1~113.8 | 853~2685 | 2×160 | 36701 | |
| 28 | 40.2~126.9 | 918~2888 | 2×200 | 47169 | |
| 29 | 44.7~140.9 | 985~3098 | 2×200 | 57271 | |
| 30 | 49.5~156.0 | 1054~3315 | 2×250 | 63447 | |
| 32 | 60.0~189.4 | 1199~3772 | 2×355 | 75121 | |
| 34 | 72.0~227.1 | 1353~4258 | 2×450 | 88227 | |
| 36 | 85.5~269.6 | 1517~4774 | 2×560 | 99763 | |
| 38 | 100.5~317.1 | 1690~5319 | 2×800 | 134685 | |
| 40 | 171.2~370.0 | 1873~5893 | 2×1000 | 150482 |
Type RADW-B Parameters:
| Machine No | Volume(m3/s) | Total Pressure(Pa) | Power(KW) | Weight(kg) | |
| RADW (B) -6-NO (n=980r/min) | 15 | 14.5~36.6 | 805~2335 | 2×55 | 7456 |
| 16 | 17.6~44.4 | 916~2656 | 2×75 | 8730 | |
| 17 | 21.1~53.3 | 1035~2999 | 2×90 | 9978 | |
| 18 | 25.0~63.3 | 1160~3362 | 2×132 | 11120 | |
| 19 | 29.4~74.4 | 1292~3746 | 2×160 | 16255 | |
| 20 | 34.3~86.8 | 1432~4150 | 2×220 | 18635 | |
| 21 | 39.7~100.5 | 1579~4576 | 2×280 | 22626 | |
| RADW (B) -8-NO (n=740r/min) | 18 | 18.9~47.8 | 661~1917 | 2×55 | 10560 |
| 19 | 22.2~56.2 | 737~2136 | 2×75 | 15155 | |
| 20 | 25.9~65.5 | 816~2367 | 2×90 | 16555 | |
| 21 | 30.0~75.9 | 900~2609 | 2×132 | 19106 | |
| 22 | 34.5~87.2 | 988~2863 | 2×160 | 21009 | |
| 23 | 39.4~99.7 | 1080~3130 | 2×185 | 23184 | |
| 24 | 44.8~I13.2 | 1176~3408 | 2×220 | 30538 | |
| 25 | 50.6~128.0 | 1276~3698 | 2×280 | 34976 | |
| 26 | 56.9~144.0 | 1380~3999 | 2×355 | 40234 | |
| 27 | 63.7~161.0 | 1488~4313 | 2×355 | 42701 | |
| 28 | 71.1~179.8 | 1600~4638 | 2×450 | 47569 | |
| RADW (B) -10-NO (n=590r/min) | 21 | 23.9~60.5 | 572~1659 | 2×75 | 18026 |
| 22 | 27.5~69.5 | 628~1820 | 2×75 | 19569 | |
| 23 | 31.4~79.5 | 686~1990 | 2×90 | 21584 | |
| 24 | 35.7~90.3 | 747~2166 | 2×110 | 29118 | |
| 25 | 40.3~102.1 | 811~2351 | 2×160 | 32236 | |
| 26 | 45.4~114.8 | 877~2542 | 2×185 | 34634 | |
| 27 | 50.8~128.6 | 946~2742 | 2×200 | 39501 | |
| 28 | 56.7~143.4 | 1017~2949 | 2×250 | 42269 | |
| 29 | 63.0~159.3 | 1091~3163 | 2×250 | 52371 | |
| 30 | 69.7~176.4 | 1168~3385 | 2×315 | 62187 | |
| 32 | 84.6~214.0 | 1329~385J | 2×450 | 73121 | |
| 34 | 101.5~256.7 | 1500~4348 | 2×560 | 85227 | |
| 36 | 120.4~304.7 | 1682~4874 | 2×710 | 93763 | |
| RADW (B) -12-NO (n=490r/min) | 25 | 33.5~84.8 | 559~1621 | 2×110 | 30936 |
| 26 | 37.7~95.3 | 605~1754 | 2×110 | 33134 | |
| 27 | 42.2~106.8 | 652~1891 | 2×132 | 36361 | |
| 28 | 47.1~119.1 | 702~2034 | 2×160 | 39169 | |
| 29 | 52.3~132.3 | 753~2182 | 2×160 | 49271 | |
| 30 | 57.9~146.5 | 806~2335 | 2×200 | 60447 | |
| 32 | 70.3~177.7 | 916~2656 | 2×250 | 70121 | |
| 34 | 84.3~213.2 | 1035~2999 | 2×315 | 80227 | |
| 36 | 100.0~253.1 | 1160~3362 | 2×450 | 93763 | |
| 38 | 117.6~297.6 | 1292~3746 | 2×560 | 120685 | |
| 40 | 137.2~347.2 | 1432~4150 | 2×710 | 140482 | |
| 42 | 158.8~401.9 | 1579~4576 | 2×1000 | 160781 | |
| 44 | 182.6~462.1 | 1733~5022 | 2×1250 | 185583 |
Features
1. In order to meet the resistance requirements of coal mine ventilation network, and to ensure the efficiency of the fan, the machine uses a rotating structure, the two wheels are mutually reverse rotation, you can save the guide vane and reduce the loss of the guide vane, Improve the efficiency of the fan.
2. Adopt type of motor and impeller direct connection, to avoid damage to the transmission device, but also eliminates the energy loss of the transmission device to improve the efficiency of the fan device.
3. The motor is installed in the fan main fan in the closed cover, the enclosure has a certain pressure, can make the motor and fan flow channel containing gas gas isolation, but also play a certain role in the heat, Two rows of streamlined air duct, through the main air duct and the ground atmosphere, so that fresh air into the closed cover, while the air inside the fan in the fan running to maintain a positive pressure state.
4. The maximum hydrostatic efficiency of the fan up to 86% or more, wide efficient area, to ensure that the mine in the three stages of the main fan efficiency are more than 75%. Reversing the operation of China's large-scale mine main fan low efficiency, can save a lot of power.
5. Fan can reverse the wind, the amount of air up to 60% of the air volume, do not have another anti-air duct, with savings in infrastructure investment and the advantages of fast wind speed.
6. The impeller blade angle can be adjusted, according to the requirements of production to adjust the blade angle. The fan with a special design, performance curve without hump, in any case of network resistance, can be stable operation.
7. The series of fans running stable, small machine vibration, fan and diffuser can be installed in the wheeled flatbed, can be long-term continuous operation.
Ordering instructionsWhen ordering, please specify the fan number, speed, air volume, wind pressure, outlet angle and direction of rotation, as well as motor model, power, speed and so on.
The most important factors are volume and pressure.
Customized
When the exiting machine number, rotation, the wind angle and transmission mode can not meet the needs of users, we can design according to the fan similar theory and the user's specific parameters requirements.
Technical Support Service
When using our products, If any problems on installation,operation,maintainance..and so on, please contact our sale manager directly or leave a message on our website, we will call you in the first time.
Detailed Performance Catalog
Contact our sales manager to get a list of available fan sizes and to view detailed performance curves for each fan KuangFeng builds.
When the exiting machine number, rotation, the wind angle and transmission mode can not meet the needs of users, we can design according to the fan similar theory and the user's specific parameters requirements.
Technical Support Service
When using our products, If any problems on installation,operation,maintainance..and so on, please contact our sale manager directly or leave a message on our website, we will call you in the first time.
Detailed Performance Catalog
Contact our sales manager to get a list of available fan sizes and to view detailed performance curves for each fan KuangFeng builds.
Our company is located in Zhoucun District, Zibo City, Shandong Province. It is adjacent to Bolai Expressway in the east, Zhoucun urban area in the west, Jiqing Expressway in the north, and China National Highway 309. With convenient transportation and superior geography, our company covers an area of 10000 square meters and fixed assets of 50 million yuan.
The company was founded in 1993 and, after decades of development, has been able to produce over 200 series and over 1200 products, with an annual production capacity of 20 million. The products are widely used in industries such as boilers, workshops, mines, textiles, oil fields, chemicals, kilns, metallurgy, power plants, cement plants, alumina, electrolytic aluminum, building materials, etc. The mining fans, axial flow fans, cotton opening fans, and material conveying fans produced have been inspected by customs and commodity inspection departments and exported to Southeast Asia, Pakistan, Algeria, Kazakhstan, and other countries, deeply favored in the international market.
The company was founded in 1993 and, after decades of development, has been able to produce over 200 series and over 1200 products, with an annual production capacity of 20 million. The products are widely used in industries such as boilers, workshops, mines, textiles, oil fields, chemicals, kilns, metallurgy, power plants, cement plants, alumina, electrolytic aluminum, building materials, etc. The mining fans, axial flow fans, cotton opening fans, and material conveying fans produced have been inspected by customs and commodity inspection departments and exported to Southeast Asia, Pakistan, Algeria, Kazakhstan, and other countries, deeply favored in the international market.
1.Q: What parameters need to be provided when you design the industrial centrifugal fans?
A: Air flow rate(m3/h), Total pressure(Pa) or Static pressure(Pa), Inlet temperature(°C), Voltage and frequency on the working site.
2. Q:What is your delivery time?
A:15-35workdays, depending on the model of the fan.
3.Q:Are you manufacturer or trading company?
A:We are the professional manufacturer of centrifugal fans , over 30 years production experience and sales experience.
4.Q:What's your MOQ?
A:The MOQ is 1set,but larger quantity, lower price.
5.Q: What's your warranty?
A: 12 months after arrival of the goods on site.
6.Q:How do you control the product's quality?
A:All the products have quality testing and dynamic balance before delivery
