Audited Supplier
The four-generation high-efficiency air-end adopt by the JAGUAR ZLS-2iC series compressor features energy-efficiency, stable running, the compressor was widely applied in manufacturing, automobile, electricity, medicine, textiles, photovoltaic, semiconductors industries. The compressor with remarkable energy-saving and consumption reduction help the enterprise achieve the aim of reducing cost and increasing efficiency.
Power: 22kw-250kw
rotary screw air compressor
PM VSD screw air compressor
screw air compressor
air compressor
Compressor
Fourth generation efficient host
The optimized integrated two-stage compression air-end has reasonable structure and low vibration. All air and oil circuits are integrated inside of the air-end, within a beautiful and elegant outlook and reducing leakage. The coaxial designed air-end without a gearbox makes a high-efficiency transmission, the motor without bearing is maintenance-free.
The design of the built-in pipeline is more compact. We reduce the bellows between the first and second stage air-end, reducing pressure loss. The optimized built-in main oil injection pipe, bearing lubrication, and oil return pipe achieves a good cooling effect. The leakage and pipe vibration were avoided due to reducing most of the outside pipelines.
Fully intelligent drive
IE4 super efficient motor
Jaguar ZLS-2iC series compressor equips IE4 ultra-efficiency permanent magnet motor, the electromagnetism scheme was optimized, the efficiency increased by 5~10%, reducing the consumption of electricity and the cost of the user. Compact with the normal asynchronous motor, the permanent magnet motor has the advantages of ultra-efficiency, compact structure, small size and light weight. Since the permanent magnet motor cancels the electric Excitation System, the motor with high efficiency, compact structure and reliable operation.
Permanent magnet VSD motor conforming to IEC 60034-30:2008. Assured by the professional certification authority.
| Model | Mpa | Exhaust volume/exhaust pressure | Power | Noise | Exhaust port pipe diameter | Pipe diameter of cooling water inlet | Cooling water flow | Weight | Size |
| m³/min | kw/HP | dB(A) | inch | inch | KG | (*W*Hmm) | |||
| ZLS30-2iC | 0.7 | 4.7 | 22/30 | 63±2 | G1-1/2'' | 3/4'' | 80 | 660 | 1400*1075*1320 |
| 0.8 | 4.4 | ||||||||
| 1 | 4 | ||||||||
| 1.25 | 3.6 | ||||||||
| ZLS40-2iC | 0.7 | 6.4 | 30/40 | 64±2 | G1-1/2'' | 3/4'' | 80 | 800 | 1660*1150*1480 |
| 0.8 | 5.9 | ||||||||
| 1 | 5.2 | ||||||||
| 1.25 | 4.6 | ||||||||
| ZLS50-2iC | 0.7 | 7.5 | 37/50 | 64±2 | G1-1/2'' | 3/4'' | 80 | 950 | 1660*1150*1480 |
| 0.8 | 7.1 | ||||||||
| 1 | 6.2 | ||||||||
| 1.25 | 5.5 | ||||||||
| ZLS60-2iC | 0.7 | 9.6 | 45/60 | 65±2 | G2'' | 1'' | 200 | 1100 | 1750*1280*1600 |
| 0.8 | 9.2 | ||||||||
| 1 | 8.6 | ||||||||
| 1.25 | 7 | ||||||||
| ZLS75-2iC | 0.7 | 12.6 | 55/75 | 70±3 | G2'' | 1' | 200 | 1300 | 1750*1280*1600 |
| 0.8 | 11.9 | ||||||||
| 1 | 10.3 | ||||||||
| 1.25 | 8.6 | ||||||||
| ZLS100-2iC | 0.7 | 17 | 75/100 | 71±3 | G2'' | 1-1/2'' | 200 | 1650 | 1800*1300*1700 |
| 0.8 | 15.6 | ||||||||
| 1 | 12.6 | ||||||||
| 1.25 | 11.5 | ||||||||
| ZLS125-2iC | 0.7 | 20.3 | 90/125 | 73±3 | DN65 | 1-1/2'' | 200 | 2500 | 2800*1650*1800 |
| 0.8 | 19.3 | ||||||||
| 1 | 17.3 | ||||||||
| 1.25 | 15.3 | ||||||||
| ZLS150-2iC | 0.7 | 24.2 | 110/150 | 74±3 | DN80 | 1-1/2'' | 200 | 3000 | 2800*1650*1800 |
| 0.8 | 23.2 | ||||||||
| 1 | 21 | ||||||||
| 1.25 | 17.3 | ||||||||
| ZLS175-2iC | 0.7 | 29.1 | 132/175 | 74±3 | DN100 | 2'' | 300 | 3650 | 3200*1800*2050 |
| 0.8 | 27.7 | ||||||||
| 1 | 24.7 | ||||||||
| 1.25 | 22.1 | ||||||||
| ZLS200-2iC | 0.7 | 36.3 | 160/200 | 75±3 | DN100 | 2'' | 300 | 4376 | 3800*2000*2050 |
| 0.8 | 33.6 | ||||||||
| 1 | 30.2 | ||||||||
| 1.25 | 28.1 | ||||||||
| ZLS250-2iC | 0.7 | 41.2 | 185/250 | 79±3 | DN100 | 2'' | 400 | 5000 | 3800*2000*2050 |
| 0.8 | 38.9 | ||||||||
| 1 | 34.5 | ||||||||
| 1.25 | 32.1 | ||||||||
| ZLS275-2iC | 0.7 | 45.9 | 200/275 | 79±3 | DN125 | 2'' | 400 | 5100 | 4200*2300*2200 |
| 0.8 | 42.5 | ||||||||
| 1 | 40.1 | ||||||||
| 1.25 | 38 | ||||||||
| ZLS300-2iC | 0.7 | 48.6 | 220/300 | 80±3 | DN125 | 2'' | 400 | 5300 | 4200*2300*2200 |
| 0.8 | 47.2 | ||||||||
| 1 | 42.5 | ||||||||
| 1.25 | 40 | ||||||||
| ZLS350-2iC | 0.7 | 56.1 | 220/300 | 80±3 | DN125 | DN65 | 400 | 6400 | 4200*2300*2200 |
| 0.8 | 54.1 | ||||||||
| 1 | 46.7 | ||||||||
| 1.25 | 43.5 | ||||||||
| ZLS375-2iC | 0.7 | 60 | 250/350 | 82±3 | DN125 | DN65 | 400 | 7500 | 4200*2300*2200 |
| 0.8 | 57.2 | ||||||||
| ZLS420-2iC | 0.7 | 68 | 315/420 | 82±3 | DN125 | DN65 | 400 | 7800 | 4500*2500*2350 |
| 0.8 | 62.5 | ||||||||
| ZLS475-2iC | 0.7 | 73 | 355/475 | 86±3 | DN150 | DN65 | 400 | 8500 | 4500*2500*2350 |
Configurattion diagram
Manufacturing technique
1.High Precision CBN Grinding Machine
2.Imported DMG MORI CNC Horizontal machining Center
3.Imported German Zeiss CMM Measuring Center
4.Imported Italian Salvagnini Dynamic Laser Cutting Machine
High Precision Equipment for manufacturing High Precision Screw Rotors EAMI uses professional high-precision manufacturing equipment, to ensure high standard design requirements, The screw screw rotor is grinded with high precision, and the machining precision reaches 0.005mm. The surface roughness reaches Ra0.1-0.2um.
Application
