Audited Supplier
USB-UB-001-221-4
USB
USB
Universal
4 to 5.9 Feet
Switch
Data Transmission Function
Not Scalable
Charging Function
With IC Chip
Customized
5A Max.
Yes
TPE + ABS
UL2725
USB-If, ISO9001, ISO14001, Ts16949, ISO13485
Yes
20V Max.
10000 Cycles Min.
PALCONN OR ODM
DHL, UPS, Sf-Express
TYPE C CABLE L=6FEET
China
8544421900
Product Description
***Support fast charge protocol:
APPLE QC2.0/QC3.0/QC4.0
SAMSUNG AFC-9V-12V
HUAWEI FCP 9V-12V-27.0W
HUAWEI SCP 3.4~12.0V-88W
VOOC/DASH/WARP
PD PPS/AVS
USB2.0 TYPE C CABLE-----USB-IF VID NO.: 5510
Built-in E-mark IC (identification and protection function)Current rating: 5A @ 20V Max.
Length: 1800mm
Identify Type C plug USB-IF TID No. Provide data information to the equipment to determine whether it is qualified for certification.
The product has been tested by 32 projects (Plug + Cable)
Plug Test Item
| Test or Examination | ||
| NO. | Item | |
| 1 | Examination of product | |
| 2 | Contact Resistance | |
| 3 | Insulation Resistance | |
| 4 | Withstanding Voltage | |
| 5 | Insertion force | |
| 6 | Withdrawal force | |
| 7 | Durability(preconditioning) | |
| 8 | Durability | |
| 9 | Temperature Humidity Test | |
| 10 | Thermal shock | |
| 11 | Temperature life | |
| 12 | Temperature life (preconditioning) | |
| 13 | Reseating | |
| 14 | Vibration | |
| 15 | Salt spray | |
| 16 | Drop Test | |
| 17 | Resistance to Soldering Heat | |
Cable Test Item
| NO. | Item | Test Group | Requirement | |||||||
| 1 | Appearance | See with the naked eye,there shall not be any abnormality such as deformity,exfoliation of plating,ETC,which can reduce performance,No defect such as cracks scratchs or blemishes. | No damage | |||||||
| 2 | Insulation Resistance | Insert the wire connector electrical measuring machine corresponding to the test fixture,Temperature:25ºC ,Relative humidity:80%RH | 10MΩ(Min) | |||||||
| 3 | Cable Assembly Voltage Drop | Insert the wire connector electrical measuring machine corresponding to the test fixture,Temperature:25ºC ,Relative humidity:80%RH | 250 mV max for GND and 400 mV max for VBUS. | |||||||
| 4 | Cable Conduction impedance | Insert the wire connector electrical measuring machine corresponding to the test fixture,Current 1mA,Temperature:25ºC ,Relative humidity:80%RH | 3Ω(Max) | |||||||
| 5 | Withstanding Voltage | Insert the wire connector electrical measuring machine corresponding to the test fixture,electric voltage 100VAC/DC Temperature:25ºC ,Relative humidity:80%RH | No Breakdown,No damage | |||||||
| 6 | Contact Resistance | Mate connectors, Measure by dry circuit,20mV Max,100mA | 40mΩ(Max) Max change delta +10mΩ | |||||||
| 7 | Flexibility test | ±60°/3000cycles@45cycles per 1minute,Weight is 200g. | NO Electrical NG. NO damage | |||||||
| 8 | Load test | 5kgf for axis force test | NO Electrical NG. NO damage | |||||||
| 9 | Mating/Un-mating Force test | Nsertion force:5~20N Withdrawal force:8~20N. | 40mΩ(Max) Max change delta +10mΩ. Appearance:NO damage | |||||||
| 10 | Durability | TYPE-C Mated and unmated connectors up to 10000 cycles at a minimum rate of 200cycles per hours,mating force 5~20N ;unmating force 8~20N . | 40mΩ(Max) Max change delta +10mΩ. Appearance:NO damage | |||||||
| 11 | Humidity Test | Temperature:65±2ºC, Relative Humidity:90% Duration:96 hours Upon completion of the test,specimens shall be conditioned at ambient room conditions for 96 hours | NO Electrical NG. NO damage | |||||||
| 12 | Salt mist spray | humidity:95-98%(R.H.); Temperature:35±2ºC; time:24hours; PH Value:6.5-7.2. 5%salt solution | NO Electrical NG. NO damage | |||||||
| 13 | Thermal shock | Mate Cable together and perform the test as follows. 10 cycle of: A)-55ºC for 30 minutes; B)+85ºC for 30 minutes | NO Electrical NG. NO damage | |||||||
| 14 | Low temperature test | The cable is exposed to -40ºC atmosphere for 96 hours. After testing it shall be left alone for 1 to 2 hours in room ambient | NO Electrical NG. NO damage | |||||||
| 15 | Heat test | The cable is exposed to 85ºC atmosphere for 96 hours. After testing it shall be left alone for 1 to 2 hours in room ambient. | NO Electrical NG. NO damage | |||||||
ABOUT US:
Palconn Technology Co., Ltd. was established in Nov of 2005,which is mainly engaged in production of connectors and cables R&D, production, and sales. As a high-tech company, it provides connectors of USB 2.0, USB 3.0, Type C connector, Micro, Jack, etc. and cables of HDMI, USB2.0 and 3.0, Type C, RCA, Displayport, etc., which are widely used in communication products, such as mobile phone and computer, and high-end field of automobile and medical apparatus and instruments.**New product development and manufacturing capabilities:
Hardware molds and plastic molds from design and development to production are completed in the factory.
**Production and manufacturing capabilities:
We have semi-automated and fully automated production lines, as well as dust-free production workshops. Meet all kinds of products production and manufacturing.
