Audited Supplier
USB-UB-001-507
USB2.0/USB3.0 Am Plug
USB-C Type
Universal
<4 Feet
Switch
Data Transmission Function
Not Scalable
Charging Function
With IC Chip
Customized
480m/S
3.25A Max.
100VAC/DC Min.
PVC Jacket
4.00mm
30AWG*2c+20AWG*2c+Al+ Braid
E343712
10mΩ(Min)
250 Mv Max for Gnd and 400 Mv Max for Vbus
3Ω(Max)
Type-C 40mΩ(Max) USB Am 30mΩ(Max)
±60°/3000cycles, Weight=200
5kg for Axis Force Test
24hours
170PCS
Palconn or ODM
PE Bag + Layered Packaging + Waterproof Bag + Cart
USB2.0AM to Type C cable
China
8473309000
Product Description
USB2.0 AM TO TYPE C,Quick Charge Cable.
Supports Fast Charging Power of 65W max.
1, ELECTRICAL CHARACTER:
Data transmission standard: 480M/s.
Rated current: 3.25A max.
Rated voltage: 20VDC max.
Cable withstanding Voltage: 100VAC/DC min.
Voltage Drop: 0.3V max. for VBUS; 0.2V max. for GND
***********************************************************************************************************
Question: what is voltage drop?
Answer: The voltage drop of the cable is the phenomenon that the voltage generated by the power is reduced after a distance of the cable transmission.The reason for the voltage drop is that the cable has resistance.
Question: what is the effect of the volage drop?
Answer: The smaller the volage drop, the larger the charging power.The intuitive performance is that the charging speed is faster under the same conditions.
2, The cable consisting of 170pcs copper wires.
3, Product Packaging:
4, Product quality control ability and content:
4.1) We have various physical tests and chemical tests to test the reliability of the product.
4.2) The product has been tested by 32 projects (Plug + Cable)
Plug Test Item
| Test or Examination | ||
| NO. | Item | |
| 1 | Examination of product | |
| 2 | Contact Resistance | |
| 3 | Insulation Resistance | |
| 4 | Withstanding Voltage | |
| 5 | Insertion force | |
| 6 | Withdrawal force | |
| 7 | Durability(preconditioning) | |
| 8 | Durability | |
| 9 | Temperature Humidity Test | |
| 10 | Thermal shock | |
| 11 | Temperature life | |
| 12 | Temperature life (preconditioning) | |
| 13 | Reseating | |
| 14 | Vibration | |
| 15 | Salt spray | |
| 16 | Drop Test | |
| 17 | Resistance to Soldering Heat | |
Cable Test Item
| NO. | Item | Test Group | Requirement | |||||||
| 1 | Appearance | See with the naked eye,there shall not be any abnormality such as deformity,exfoliation of plating,ETC,which can reduce performance,No defect such as cracks scratchs or blemishes. | No damage | |||||||
| 2 | Insulation Resistance | Insert the wire connector electrical measuring machine corresponding to the test fixture,Temperature:25ºC ,Relative humidity:80%RH | 10MΩ(Min) | |||||||
| 3 | Cable Assembly Voltage Drop | Insert the wire connector electrical measuring machine corresponding to the test fixture,Temperature:25ºC ,Relative humidity:80%RH | 250 mV max for GND and 400 mV max for VBUS. | |||||||
| 4 | Cable Conduction impedance | Insert the wire connector electrical measuring machine corresponding to the test fixture,Current 1mA,Temperature:25ºC ,Relative humidity:80%RH | 3Ω(Max) | |||||||
| 5 | Withstanding Voltage | Insert the wire connector electrical measuring machine corresponding to the test fixture,electric voltage 100VAC/DC Temperature:25ºC ,Relative humidity:80%RH | No Breakdown,No damage | |||||||
| 6 | Contact Resistance | Mate connectors, Measure by dry circuit,20mV Max,100mA | 40mΩ(Max) Max change delta +10mΩ | |||||||
| 7 | Flexibility test | ±60°/3000cycles@45cycles per 1minute,Weight is 200g. | NO Electrical NG. NO damage | |||||||
| 8 | Load test | 5kgf for axis force test | NO Electrical NG. NO damage | |||||||
| 9 | Mating/Un-mating Force test | Nsertion force:5~20N Withdrawal force:8~20N. | 40mΩ(Max) Max change delta +10mΩ. Appearance:NO damage | |||||||
| 10 | Durability | TYPE-C Mated and unmated connectors up to 10000 cycles at a minimum rate of 200cycles per hours,mating force 5~20N ;unmating force 8~20N . | 40mΩ(Max) Max change delta +10mΩ. Appearance:NO damage | |||||||
| 11 | Humidity Test | Temperature:65±2ºC, Relative Humidity:90% Duration:96 hours Upon completion of the test,specimens shall be conditioned at ambient room conditions for 96 hours | NO Electrical NG. NO damage | |||||||
| 12 | Salt mist spray | humidity:95-98%(R.H.); Temperature:35±2ºC; time:24hours; PH Value:6.5-7.2. 5%salt solution | NO Electrical NG. NO damage | |||||||
| 13 | Thermal shock | Mate Cable together and perform the test as follows. 10 cycle of: A)-55ºC for 30 minutes; B)+85ºC for 30 minutes | NO Electrical NG. NO damage | |||||||
| 14 | Low temperature test | The cable is exposed to -40ºC atmosphere for 96 hours. After testing it shall be left alone for 1 to 2 hours in room ambient | NO Electrical NG. NO damage | |||||||
| 15 | Heat test | The cable is exposed to 85ºC atmosphere for 96 hours. After testing it shall be left alone for 1 to 2 hours in room ambient. | NO Electrical NG. NO damage | |||||||
5, Develop production and manufacturing capacity:
ABOUT US:
Palconn Technology Co., Ltd. was established in Nov of 2005,which is mainly engaged in production of connectors and cables R&D, production, and sales. As a high-tech company, it provides connectors of USB 2.0, USB 3.0, Type C connector, Micro, Jack, etc. and cables of HDMI, USB2.0 and 3.0, Type C, RCA, Displayport, etc., which are widely used in communication products, such as mobile phone and computer, and high-end field of automobile and medical apparatus and instruments.
