Audited Supplier
F02B6
Wireless
Uav Anti
ISO
＞4CH
400m~6GHz
≥20Kbps
Box
China
9030409000
Product Description
- Brief introduction
UAV detection equipment can be used for large-scale event support and can also be used for protection in key places. The device can be used alone or in conjunction with drone countermeasures. Can be deployed individually, in-vehicle and stationary.
- Features
2. Detection angle: 360°
3. Detection distance: ≥ 6km
4. With UAV identification library, it can automatically identify targets
5. Detection and recognition rate: ≥ 95%.
6. With pilot positioning function
- Performance metrics
2. Detection angle: 360°
3. Detection distance: ≥ 2.5 km (city) ≥6 km (suburb).
4. Direction finding accuracy: ≤3 ° (RMS).
5. Identify the number and model of drones at the same time: the number ≥ 10, the model ≥ 5, the brand ≥ 2
6. Scanning speed: greater than 200MHz/s
7. With early warning capabilities, no need for unmanned aerial vehicles to take off, ground start-up can be detected, with early warning capabilities, the minimum relative detection height: 0m.
8. Tracking speed: The drone can be successfully detected when the speed ≥ 15 m/ s
9. Working temperature: -40 °C ~ 75 °C.
10. Power supply mode: AC 220V/DC DC12V
11. Response time: The UAV appears within the detection range (≥3km), and the response time of the detection UAV ≤2s
12. With positioning direction calibration function: when the equipment is started, it can automatically calibrate the reference direction of the equipment with the due north direction as the reference, automatic positioning, and display on the map. The direction finding accuracy ≤ 2°, and the positioning accuracy ≤ 10 meters
13. The system has a cross-positioning function and can locate the UAV.
14. It has the function of pilot positioning (positioning remote control or operator).
15. The system supports the use of fixed IP and dynamic IP access
16. The system can identify and report the model of the UAV, frequency point, bandwidth, signal strength, distance, discovery time, orientation and other information.
17. A black and white list of drones can be established, which can accurately identify their own and illegal drones, and whitelist drones do not warn
18. After the detection device detects that an aircraft has entered the defense area, the device can notify the client of relevant intrusion information, and the main interface of the client will have an alarm prompt and a voice prompt; the map shows the flight trajectory of the drone.
19. With the direction of the UAV derived from the detection equipment, it automatically guides the target to interfere with the countermeasure
20. Establish a UAV identification library, support the identification of UAV targets, identify and report UAV signals that are not built in the library, update the database, and expand the UAV spectrum feature library.
21. Passive detection function: The system should not actively emit and detect electromagnetic waves during the process of detecting UAV signals
22. Single operation: equipment deployment time: ≤2.0 minutes; equipment withdrawal time: ≤2.0 minutes;
23. Electromagnetic compatibility test: (1) Electrostatic discharge immunity: to meet the severity of GB/T 17626.2 in the severity of the electrostatic discharge immunity test; (2) to meet the GB/T 17626.3 in the harsh level 3 of the RF electromagnetic field radiation immunity test
