Ultra Fine Aluminum Enameled Winding Wires

Price $3.20 Compare
Min Order 500 kg
Shipping From Henan, China
Popularity 263 people viewed
Quantity
+-
 

Henan Signi Aluminium Co., Ltd.

VIP   Audited Supplier 15 years
Profile Certified by SGS/BV
130/155/180/200/220
Aluminum Wire
Round
Winding of Transformers, Motors, Generators, etc
Insulated
Coated
Cold Drawing
Soft State
Metal Fiber
0.2-8 mm
130, 155, 180, 200, 220 ºC
IEC60317-0-2, IEC60317-29 MW36-a
E345303
15/30/200kg
Signi aluminium
Wooden Pallet and Wooden Box
swg5-swg38
Henan China
85441900
Product Description
Ultra Fine Aluminum Enameled winding wires

Introduction of aluminum winding wires
Enameled winding wire is made up of conductor coated many times by insulation material after drawing or extuding from oxygen-free cooper rod or electical aluminum rod
 

Feature of aluminum winding wires
1. High temperature resistance
2. Chemical corrosion resistance
3. Transformer oil resistance
4. Low temperature resistance
5. Radiation resistance
6. High breakdown voltage
7. Good mechanical properties
8. Other features: Self-bonding,solderable


Main aluminum wire
Superfine polyurethane enameled round aluminum wire
enameled cooper clad aluminum wire
enameled rectangular aluminum wire
fiber glass aluminum wire
paper wrapped aluminum wire





Description of aluminum wire
Enameled aluminum wire in the use of mold-type surface or blamkets or insulating paint coated one or both made by drying
Magnet wire can be divided by insulation into thin film, thick film and thicker film, that is -1, -2, -3 level, according to the sharpe of sub-round, flat
Yield strength can be divided into soft state and semi-hard state, its mechanical properties and chemical properties of stability, is the production of transformers, motors and other equipment ideal winding wires


Standard 
Applicable standard or part of the reference standard
IEC60317-0-2
IEC60317-29
 
Electronic transformer
Mico motor
Computer cable
Voice coil and other application purposes

 
Typical  performance  
The following information do not  apply to custom specification
 
TestRequirement of the standards
SizeSide A:0.025-0.400mm,Side B:0.250-3.000mm   
Electrical resistivity0.017241Ω.mm2/m
Breakdown voltageOver  700V
Heat shockThe minimum Heat shock  temperature shall be 200/220/240ºC 
Resistance to solvents  Standard solvent. Using a pencil of hardness "2H" the coating 
shall not be removed
AppearancePurplish, Smooth and bright , free from lacquer wart
packingPlastic spool or wooden spool, round wire length are 
customizable 
 

Application of aluminum winding wire
 
Can be winded neatly to increase the slot fullness and reduce  the space, excellent formability, more surface area, good heat dissipation. 

 

The package
 


Message Type
* Message Content
* Name  
* Phone
* Email
* CAPTCHA