Audited Supplier
UPT-154/5500
AC Motor
Diesel
ISO
New
12 Months
12 Months
Jarlo
Bulk
10100x2070x2300
China
8474209000
Product Description
UPT-154/5500 Mining Rock Breaker
Demensions
Working scope
Main configuration and technical parameters
Equipment features
1. Hydraulic torque converter and gearbox drive engineering chassis, four-wheel drive, large driving torque, strong climbing performance.
2. The cab meets the ergonomic design of mine safety, centralized control, reasonable layout, comfort and convenience.
3. Hydraulic wet dual braking system, driving oil brake, parking closed spring brake, to meet the needs of safe use of long ramps and low roadways in mines.
4. The fully hydraulic telescopic and slewing robotic arm has strong bearing capacity, stable action, flexible operation, and no construction blind spots.
5. Articulated special chassis, the turning radius is smaller, and the needs of the shaft and roadway operation are met to the greatest extent.
6. The crushing hammer adopts the industry's leading Korean imported brand products, with stable performance, flexible reversing, high impact power, small recoil force and long service life.
7. The reinforced engineering chassis design greatly enhances the rigidity and strength of the vehicle body, the weight of the whole vehicle is larger, and the crushing stability is better.
Demensions
Working scope
Main configuration and technical parameters
| Model | UPT-154/5500 | |||||
| Item | Unit | Parameters | ||||
| Equipment Features | Dimension | Length | mm | 10100 | ||
| Width | mm | 2070 | ||||
| Height | mm | 2300 | ||||
| Min. Turning radius | mm | Inner:≤3100 Outer:≤5550 | ||||
| Min. Ground clearance | mm | 250 | ||||
| Max. Breaking width | mm | 3220 | ||||
| Max. Breaking height | kg | 18200 | ||||
| Total mass | (°) | ±40 | ||||
| Working boom | Working pressure | MPa | 18 | |||
| Working boom swing angle(left/right) | ° | ±30 | ||||
| Hydraulic breaking hummer | Breaking hummer manufacturer | Original Imported Korean Sapper | ||||
| Impacting power | J | ≥5500 | ||||
| Impacting frequency | Hz | 4.67-9.17 | ||||
| Rod diameter | mm | 140 | ||||
| Weight | kg | 1000 | ||||
| Working flow | L/min | 120-150 | ||||
| Working pressure | MPa | 16-18 | ||||
| Chassis | Driving type | - | Tyre (Articulate) | |||
| Steering pressure | MPa | 16 | ||||
| Driving speed | Gear 1 | km/h | 7±0.9 | |||
| Gear 2 | km/h | 14±2 | ||||
| Gradeability | (°) | 20 | ||||
| Main configuration | Brand/model | - | Cummins | |||
| Rated power | kW | 154 | ||||
| Rated rotation speed | r/min | 2200 | ||||
| Service brake | Fully enclosed multi-disc wet spring brakes | |||||
| Parking brake | Fully enclosed multi-disc wet spring brakes | |||||
| Brake system | Mico | |||||
| Driving Cab | Front with protective Fence | |||||
Equipment features
1. Hydraulic torque converter and gearbox drive engineering chassis, four-wheel drive, large driving torque, strong climbing performance.
2. The cab meets the ergonomic design of mine safety, centralized control, reasonable layout, comfort and convenience.
3. Hydraulic wet dual braking system, driving oil brake, parking closed spring brake, to meet the needs of safe use of long ramps and low roadways in mines.
4. The fully hydraulic telescopic and slewing robotic arm has strong bearing capacity, stable action, flexible operation, and no construction blind spots.
5. Articulated special chassis, the turning radius is smaller, and the needs of the shaft and roadway operation are met to the greatest extent.
6. The crushing hammer adopts the industry's leading Korean imported brand products, with stable performance, flexible reversing, high impact power, small recoil force and long service life.
7. The reinforced engineering chassis design greatly enhances the rigidity and strength of the vehicle body, the weight of the whole vehicle is larger, and the crushing stability is better.
