Audited Supplier
XMPYT-48/460(A)
12 Months
12 Months
6000mm
Jarlo
Bulk
8000x1950x2190
China
8430509000
Product Description
XMPYT-96/600 Scaling and Scraping Rig
Structure and Dimensions
Min. Turning Radius
Max. Scaling Height
Main configuration
| Type | XMPYT-48/460(A) | ||||
| Item | Unit | Parameters | |||
| Unit performance | Dimensions | L | mm | 5600 | |
| W | mm | 1650 | |||
| Min. Height | mm | 1700 | |||
| Max. Height | mm | 2000 | |||
| Min. turning radius | mm | Inner:≤1850 Outer:≤3690 | |||
| Min. ground clearance | mm | 250 | |||
| Max. working Height | mm | 6000 | |||
| Total weight | kg | 7200 | |||
| Articulated steering angle | (°) | ±40 | |||
| Cab | - | Can be lifted, lowered, tilted, with protective net | |||
| Boom | Working pressure | MPa | 14 | ||
| Rated pressure | MPa | 15.5 | |||
| Work flow | L/min | 25 | |||
| Rotation angle (left and right) | ° | ±60 | |||
| Hydraulic rock breaker | Impact power | J | ≥460 | ||
| Impact frequency | Hz | 11-20 | |||
| Rod diameter | mm | 45 | |||
| Weight | kg | 70 | |||
| Work flow | L/min | 20-40 | |||
| Work pressure | MPa | ≤12 | |||
| Driving system | Drive mode | - | Tyre type(Articulated) | ||
| Work Pressure | MPa | 16 | |||
| Rated pressure | MPa | 17.5 | |||
| Work flow | L/min | 8 | |||
| Driving speed | Fast gear | km/h | 11.0±1.1 | ||
| Slow gear | km/h | 4.0±0.4 | |||
| Backward | km/h | 4.0±0.4 | |||
| Driving system | Gradeability | (°) | 25 | ||
Main technical parameters
Performance characteristics
- Hydraulic torque converter and gearbox drive engineering chassis, four-wheel drive, large driving torque, high shoveling ability, and strong climbing performance.
- The electronic control system collects and processes engine speed and load information and accurately controls the displacement of the oil pump in real time, making the chassis more maneuverable and safer, preventing braking and overload stalling, and effectively protecting engine and driving system.
- The cab adopts mining safety ergonomic design and has passed FOPS and ROPS certification. Centralized control, reasonable layout, comfortable and convenient; the cab can be raised, lowered and tilted to facilitate precise operation.
- Hydraulic wet dual braking system, oil brake for driving and closed spring brake for parking which meet the safety usage requirements of mines with long slopes and low tunnels.
- The fully hydraulic telescopic and rotating mechanical arm has strong load-bearing capacity, stable movement, flexible operation and no construction blind spots.
- Articulated special chassis with smaller turning radius.
- The breaking hammer adopts industry-leading South Korean imported brand products, with stable performance, flexible reversal, high impact energy, small recoil force.
- The reinforced engineering chassis greatly enhances the rigidity and strength of the vehicle body, making the vehicle heavier and more stable in crushing.
- The boom is equipped with an overload protection system, which can effectively protect the boom and hydraulic cylinder during scaling.
- Equipped with a ballast cleaning shovel, which can quickly and properly clean the blast pile before removing the ballast, so that the scaling rig can be driven to the working site to clean the stones on the roof and side walls. It has better pass-ability and stronger adaptability.
