Payload 12 ton Chassis for Underground Mining Multifunction Application
New generation of Drive-Train product lines

UNDERGROUND UTILITY VEHICLE - LUBE TANK FOR UNDERGROUND MINING APPLICATION
UNDERGROUND OIL TANK FOR UNDERGROUND MINING APPLICATION




TU312 Underground Mining Utility Vehicle Technical Specifications
Specification | Fuel Tank |
| Engine F6L914 | Volume 112L |
| Air-Cooled | |
| 112 Kw/2300 rpm Tire II Approved | Hydraulic System |
| Fixed displacement pump system: Bar L/min/2200rpm | |
| Exhaust system | Hydraulic tank capacity |
| Catalytic exhaust Gas purifier and muffler | Return oil filtration 10μm |
| Indication of level, filtration, temperature | |
| Tranmssion | |
| C273+R32000 series power shift pump drive group 3 speed foward and reverse 4 wheel drive | 24 VDC Electrical System |
| Optional Powerful: C270+R32000 Series | Exposed components are min IP 65 standard |
| Axle | Battery Lead-Acid 2X115Ah |
| Planetary type Dana 113 Load end axle fixed or China Axle of XCMG or LiuZhou ZF | Alternator 100A |
| Angle axle oscillation +/- 10° | Driving halogen light (4+2) 70W |
| Working light (2 +2) 70KW | |
| Tyre | LED parking braking and indictor light |
| 12.00-20 TL 20 /14.00-24 TL 24 | LED side lights amber |
| Side reversing halogen light 70KW | |
| Performance | Rotating beacon, amber |
| 1st 6km/h | Wire harness ( Self extiguishing )with tinned wires and water tight conduits |
| 2nd 12km/h | |
| 3rd 25km/h | Cab |
| Max trative effort 132KN | 2 man Cab FOPS /FOPS Approved |
| Max speed in 1:7 inclined tunnel 9km/h | Air suspended driver's seat |
| Performance curve: | Seat with retractable Lap seat belt |
| Drive convention as Auto vehicle | |
| Brakes | Panel include: Customerized design |
| Service brake: hydraulically powered dual-circuit oil immerse multidisc brake in both axles | Mico pedal and William pedal location as Auto |
| Safety/Parking brake: Spring applied hydraulically release fail-safe type brake. Brake testing possible from Cabin | Operation hours |
| Fuel level | |
| Steering | Transmission temperature gauge |
| Hydraulic frame steering | Cooling water temperature gauge |
| Orbitrol pilot type | |
| Articulation angle: +/- 40° | Greasing system |
| Centralized grease fittings for the carriers | |
| Other optional: | |
| Fire suppression system Ansul system | |
| Jack leg at load end with engine end. | |
| Enclosed Cab with Air-condition |
Available Attachment mounted on universal chassis | Engine: Liquid Cooled Turbo charged Comminus QSB4.5 or any compacted design engines for MSHA standard. |
| a. Lifting platforms ( Hydro Pipe jack or titlting ) | |
| b. Crane 12Knm for lifting, Rig crane | |
| c. Grapple for crane | |
| d. sliding safety Roof ( Adjustable for height ) | |
| e.Lube Tank (At most 7 kinds of Lube) | |
| f. Miner Carrier |
About TMG
Our products include: underground trackless mining equipment (underground loaders, underground mining trucks, utility vehicles, drill jumbos, drivetrain system transmission, torque converter, axle); engineering equipment ( wheel loaders, backhoe loaders, excavators, telescopic handlers,graders, articulated dump trucks); drive-train system (transmission, torque converter, axle).
Besides our own mining equipment product, we are also official agent of XCMG product.
Besides,as a technology oriented enterprise, we also provide customers with solutions including drive-train system customization, vehicle transformation and project contracting etc.
Introduction of TMG Products

Factory Review









Audited Supplier










