Audited Supplier
CE
PLC
Insulating Glass Production Line
Vertical
New
1
No
No
No
1
GM
Protective Film
China
8464201000
Product Description
Fully automatic in-panel inflatable insulating
glass production line
1. MODEL: Automatic inflatable insulating glass production line Model GM-ZKX3360 Inner and outer laminating glass)
2.GENERAL specification
(The schematic diagram is for reference only and does not serve as a basis for acceptance.)Product Overview
- Glass load part: Equipped with an automatic film surface identification system, the conveyor belt will automatically stop when the film surface is not placed correctly.
- The all body of the washing machine is made of 304 stainless steel. The motor is independently driven and the interior is driven by an integral rubber roller. According to the thickness of the cleaning glass, the distance between the two rubber rollers is automatically adjusted using springs. The air knife is made of all-aluminum alloy. The wind is strong and durable. Durable, 3 sets of 6 high-quality brushes make glass cleaner and brighter. Types of glass that can be processed: white glass, single silver, double silver and triple silver low-e; the cleaning machine is equipped with an automatic backwash device.
- The conveyor section has a hollow server beam design, which is safe, accurate and harmless. It adopts high-efficiency dual conveyor sections to make the production smoothly.
- The positioning section of the aluminum frame adopts a hollow servo beam design, an integrated high-precision positioning device, and the glue depth can be adjusted freely.The plate pressing section adopts a high-precision servo system and cooperates with the plate pressing frame after annealing and shaping to ensure the accuracy of plate pressing. When using automatic inflating within the board, it automatically detects the length of the glass and automatically adjusts the area of the inflating section to avoid wasting inert gas and is highly efficient and energy-saving.
- According to the different requirements of customers, the production of unequal sheets, equal sheets, and three-glass and two-cavity insulating glass can be achieved.
- The standard configuration consists of the following parts:
- Upper segment (wear-resistant transfer wheel, anti-marking backrest wheel)
- Cleaning and drying section (body made of 304 stainless steel, independent transmission structure, patented aluminum air knife, LOW-E detection).
- transmission sections (hollow servo beam design) double transmission sections.
- Aluminum frame positioning section (special design, precise positioning).
- External joint piece (suitable for extra large glass, clipped hollow glass).
- All-in-one tablet pressing and inflation machine (servo tablet pressing structure, high-strength fixed four-corner positioningdesign, pressing and inflation).
- Transmission section (wear-resistant transmission wheel, anti-marking backrest wheel).
| Item | Parameter |
| Dimensions | 38000mmx2000mmX4200mm |
| ()Max glass size can make | 3300mmx6000mm |
| The largest inflatable glass that can be processed | 3300mmx6000mm |
| Minimum glass size that can be processed | 350mm x 500mm |
| Singe glass thickness can wash | 4mm -40mm |
| Minimum glass size that can be processed | 15mm - 60mm |
| Glass shape | Same size rectangular |
| Best cleaning speed | 4 -8m/min |
| Transmission speed | 0-30m/min |
| Maximum glass weight | 250kg/m |
| control method | Touch screen |
| Brush | 6 PCS |
| Power | 35kw , 380V (50HZ) |
| External wiring entrance | 10M2 wire,63A circuit breaker (5 wires) |
Main configuration details
| NO | Item | Original/Brand |
| 1 | PLC | LS South Korea/ LS |
| 2 | Touch screen | LS South Korea/ LS |
| 3 | Frequency converter | LS South Korea/ LS |
| 4 | Bracket | France /Schneider |
| 5 | Bracket | France /Schneider |
| 6 | AC contactor | France /Schneider |
| 7 | AC contactor | France /Schneider |
| 8 | switching power supply | France /Schneider |
| 9 | relay | |
| 10 | Photoelectric switch | Korean/ Ultranics |
| 11 | The electromagnetic valve | Taiwan /Yadeke |
| 12 | bottleneck | France /Schneider |
| 13 | Second gear switch | France /Schneider |
| 14 | Foot switch | France /Schneider |
| 15 | Emergency stop switch | France /Schneider |
| 16 | Water pump | China/Jinlong |
| 17 | Wind door cylinder | Taiwan /Yadeke |
| 18 | Brush | High temperature resistant wool |
| 19 | Rubber roller | Silica rubber |
| 20 | Geared motor | China |
| 21 | Plate pressing motor | LS L South Korea/ L |
| 22 | Combination drive cylinder | Taiwan /Yadeke |
| 23 | triple | Taiwan /Yadeke |
PATENT
This utility model patent discloses an automatic inflation mechanism in the pressed section plate of an insulating glass production line.
The utility model includes an inflation plate with an inflation nozzle at the bottom, and a screw driving mechanism that drives one side of the front pressure plate to open and form a certain angle with the rear pressure plate.
*Our company's new inflatable front plate screw rod opens and has a patented dust-proof structure.
*Patented automatic recognition of walking structure based on glass size sealing air curtain;
*The suction cup automatically turns on the gas-saving mode according to the size of the glass. Patented structure;
*Patented structure for instantaneous control of high and low pressure according to glass size, efficient and gas-saving mode.
Advantages: Convenient for automatic control, high production efficiency, internal and external integration, solving the problem of low production efficiency of manual argon filling. The motion controller ensures that the argon content of insulating glass is ≥85% (GB/T11944-2012 new national standard, European standard EN1279)
About Glass Washing Machine
 |  |
(The schematic diagram is for reference only and does not serve as a basis for acceptance)
MODEL: GM-QX3360
GENERAL ARRANGEMENT
The standard configuration consists of the following parts:
1. Loading section (wear-resistant transmission wheel, anti-marking backrest wheel), 1 motor
2.Cleaning and drying section (body made of 304 stainless steel, independent transmission structure, patented aluminum air knife, LOW-E detection), water heating 6 brushes, 9 motors (8 motors on the top form 6 brush motors, There is a transmission motor on the left and right, 1 fan), equipped with reverse osmosis water treatment, and 2 water pumps.
3.Transmission section (wear-resistant transmission wheel, anti-marking backrest wheel) double transmission section, 2 motors (small glass can store 2 pieces, large glass automatically switches to 1 piece)
4.Aluminum frame positioning section (special design, precise positioning), 2 motors (1 servo motor, 1 transmission motor)
5.Transmission waiting section (wear-resistant transmission wheel, anti-marking backrest wheel), 2 transmission motors (small glass can store 2 pieces, large glass automatically switches to 1 piece)
6.All-in-one tablet pressing and inflation machine (servo pressing structure, high-strength fixed four-corner positioning design, pressing and charging servo, 5 motors (1 pressing servo motor, 1 lifting servo motor, 1 sealing servo motor, air flotation fan 1)
7.Transmission section (wear-resistant transmission wheel, anti-marking backrest wheel), 1 transmission motor.
| Item | Data |
| Max glass size can wash | 3300mm x6000mm |
| Minimum glass size that can be processed | 350mm x 600mm |
| Singel glass thickness can wash | 4mm - 18mm |
| Glass shape | Flat glass |
| Best cleaning speed | 4 -8m/min |
| Transmission speed | 0-30m/min |
| Maximum glass weight | 250kg/m |
| control method | Touch screen |
| Washing machine Brush | 6 pcs |
| Motors for brush | 6 motors |
| conveyor motor | 2( one on left ,one one right) |
| Power | 35kw , 380V (50HZ) |
| water filter | 2 tanks |
| External wiring entrance | 10 63A (5 ) 10 M2 wire 63A circuit breaker (5 wires) |
Fully automatic insulating glass sealing line
MODEL: GM-FJX2535GENERAL ARRANGEMENT
Overview
- Adopting Japanese Yaskawa servo bus control system, the technology is mature and the operation is stable and reliable.
- The sealling machine adopts four-stage independent operation. When the glass length is greater than 1.75 meters, the whole section is linked. When the glass length is less than 1.75 meters, each section operates independently to maximize the glue speed.
- The electronic proportioning system is used to control the glue mixing ratio, which is easy to adjust and the proportion is accurate. It is especially suitable for high-efficiency curtain wall glass gluing. The glue is automatically adjusted according to the glue width and glue amount depth, and can meet the needs of aluminum strip width glueing from 6A to 27A.
- The input and output are transported by full servo motors, which have large bearing capacity and high transmission efficiency. The glued glass is output by a specially designed transmission system of tank chains, which can automatically center according to the thickness of the glass to prevent sticking.
- Three-glass and two-chamber glass can be sealled in one , and the glue can be applied cleanly and quickly.
- Applicable types of glue: two-component polysulfide glue or silicone sealant and silicone structural glue.
- Adopting motion controller and touch screen operating system, simple operation and stable operation.
- Automatically measure the thickness of aluminum strips, automatically adjust gluing data, and have humanized functions to solve the problem of automated production of bulk orders.
- The automatic corner trimming device automatically applies glue to correct the four corners while applying glue. Once the glue is applied, the finished product is ready, and the corners are beautiful and practical.
- Transmission section X 4 (tank chain specially designed to prevent wear)
- Suction cups (Festool)
- Console (human-machine intelligent control system
- Sealling control system (Yaskawa, Japan)
- Sealling motor (Multiple patents, industry breakthrough design)
- Pressure plate glue supply system (single and double options available)
| Item | Data |
| Machine dimensions | 13000mmx2000mmx4300mm |
| Max glass size | 3300mm x 6000mm |
| Min glass size | 300mm x 350mm |
| Sealant thickness | 2mm -15mm |
| Insulating glass finished product thickness | 12mm - 60mm |
| Singe glass thickness | 3-15mm |
| Sealing speed | 4-40 /(6A ,5mm )4 - 40m/min |
| Transmission speed | Chain |
| Load weight | 3000kg/m |
| Sealing ambient temperature | 15-40ºC |
| Control method | Touch screen |
| Gas source | 6Bar, 2.0Ms/min |
| Power | 20kw , 380V (50HZ) |
| External wiring entrance | 10 wires 63A breaker(5 wires) |
Main configuration details
Servo motors and drives
| No. | ITEM | BRAND |
| 1 | Servo motor driver | Yaskawa |
| 2 | Stepper Motor Driver | Shenzhen Lesai |
| 3 | Touch screen 10.4 inches | Taiwan Wei Lu |
| 5 | Motion Controller | Yaskawa |
| 6 | PLC module | Yaskawa |
| 7 | Frequency converter | Yaskawa |
| 8 | Low voltage electrical appliances | Schneider |
| 9 | Photoelectric switch | Korea Autonics |
Pneumatic Components
| No. | ITEM | BRAND |
| 1 | The electromagnetic valve | Taiwan Yadeke |
| 2 | Vacuum suction cup | Festo, Germany |
| 3 | Vacuum generator | Festo, Germany |
| 4 | Precision pressure reducing valve | SMC Japan SMC |
| 5 | Electric proportional valve | SMC Japan SMC |
| 6 | Oil mist separator | SMC Japan SMC |
| No. | Iterm | Specification | Material | Brand/Origin | Model |
| 1 | Linear slide | HGW 25CC | high frequency processing | TAIWAN | HSR25 |
| 2 | Linear slide | HGW 15CC | high frequency processing | TAIWAN | Z2-25×50 |
| 3 | Deep groove ball bearing | 6202 | CHINA HARBIN | LMEK25L | |
| 4 | Extended square flange linear bearing | LMEK25LUU | CHINA |
| ITEM | DATAS |
| Sealing speed | 4-40m/min |
| Min glass size | 450×500mm(L×H) |
| Max glass size | 2500x3500mm(L×H) |
| Air pressure | 0.5-0.8MPa |
| Total power | 9.4kW |
| Machine demension | 9800×1600×3400mm(L×W×H) |
Advantage
1.There are no technical requirements for the staff, as long as they can operate the machine, it saves labor. The whole process only requires 3 or 4 workers, one to put the glass, one to put the hollow aluminum strips, and one to hold the pieces of insulating glass together. Just move it down. If you need to manage the molecular sieve, you can add another worker.
2.The efficiency of gluing is high, and 600 square meters of gluing can be completed every day.
3.The glue is applied evenly and fully, with guaranteed quality and good sealing. The problems of fogging, water intrusion and mold in the insulating glass can also be solved.
4.Automatic side thickness. For insulating glass with different thicknesses, there is no need to enter the size. Gluing can be applied directly and automatically. It is easy to operate and saves time. This solves the difficulty of automating glue application in the door and window industry.
Special lifter for insulating glass
MODEL: GM-bldbGENERAL ARRANGEMENT
(The schematic diagram is for reference only and does not serve as a basis for acceptance.)
Parameters
| Item | Datas |
| Track length | 3000mm x 4000mm |
| Column height | 3400mm x 3900mm |
| Air suplly pressure | 0.5-0.8Mpa |
| Left and right rotation angle | 90° |
| Vertical lift | 1000mm |
| Suction cup | 6PCS |
| Operation method | Manual switch valve |
This machine is professional equipment for handling glass.
Suitable for handling insulating glass, tempered glass, glass curtain wall and other types of glass.
DC rechargeable vacuum pump with a maximum load capacity of 500kg
The pneumatic components are from Taiwan Airtac. The quality is stable and the pressure is 0.6-0.8MpaIt can achieve 0-90°, 0-180° flipping and handling of glass, and 0-360° rotating handling.
We make glass tempering furnace, glass edging machine, glass cutting machine, glass washing machine, glass drilling machine. Our company has more than 15 years.we have perfect after sales service and technology.contact with me if you have any request!
