Audited Supplier
- Specialized production Manufactory for Vertical Turbine Pump
- Focus on technological innovation, Over Industry leading level
- Good experience at Domestic and oversea market
- Carefully paint for Good appearance
- Years of International service standards, Engineer one-to-one service
Long axis Shaft Vertical Turbine Sea Water Industry dewatering Flood Control Drainage Pump
This kind of vertical drainage pump is mainly used for pumping no corrosion, temperature less than 60 °C, suspended solids (not including fiber, the grits) less than 150 mg/L content of the sewage or waste water.
LPT type vertical drainage pump is in LP type vertical water pumps, and on the basis of the increase and the collar, set the tube oil lubrication is water. Can smoke temperature below 60 °C, send to contain a certain solid grain (such as scrap iron and fine sand, coal, etc.) of sewage or waste water.
| Capacity | 20-5000 m3/h |
| Head | 3-150 m |
| Working Temperature | 0-60 ºC |
| Power | 1.5-3400KW |
More details please conatct TKFLO sales engine.( email/ whatapp/ Wechat 24 hours online)
Also we have the own professional engineer team to optimize and develop products, make plan to meet customized of your requirements.
https://tkflow.en.made-in-china.com/contact-info.html?pv_id=1igt8ean1ec3&faw_id=1igt8eco8c49
How It Works:
The vertical turbine pump is normally driven by an AC electric induction motor or a diesel engine via a right angle drive. The end of the pump consists of a rotating impeller that is joined to a shaft and guides the well water into a diffuser casing known as a bowl.
Pumps with multi-stage arrangements use several impellers on a single shaft to generate higher pressure that would be required for pumping water from deeper wells or where higher pressure (head) is required at ground level.
A vertical turbine pump works when water comes through the pump from the bottom through a bell-shaped device known as a suction bell. The water then moves into the first stage impeller, which increases the velocity of the water. The water then moves into the diffuser casing directly above the impeller, where the high velocity energy is transformed into high pressure. The diffuser casing also guides the fluid into the next impeller located directly above the diffuser casing. The process goes on through all the stages in the pump.
The VTP pump line is normally designed to operate in wells or sumps. Its bowl assembly consists primarily of a suction case or bell, one or more pump bowls and a discharge case. The pump bowl assembly is positioned in the sump or well at a depth to provide the proper submergence.
√ Corrosion resistance main part material, SKF bearing, thordon bearings suitable for sea water.
√ Excellent design for high Efficiency save energy for you.
√ Flexible installation method suitable for different site.
√ Stable running, Easy to install and maintain.
1.The inlet shall be vertical downward and the outlet horizontal above or under the base.
2.The impeller of pump is classified into enclosed type and half-opening type, and three adjustments: non-adjustable, semi adjustable and full adjustable. It is unnecessary to fill the water when the impellers are fully immersed in the pumped liquid.
3.On the basis o Pump, this type is additionally fit with muff armor tubing and the impellers are made of abrasive resistant material, widening the applicability of pump.
4.The connection of impeller shaft, transmission shaft, and motor shaft applies the shaft coupling nuts.
5.It applies water lubricating rubber bearing and packing seal.
6.The motor generally applies standard Y series tri-phase asynchronous motor, or YLB type tri-phase asynchronous motor as requested. When assembling Y type motor, the pump is designed with anti- reverse device, effectively avoiding reverse of pump.
More detail about our VTP series Long Shaft Vertical Turbine Pump for curve and dimension and data sheet please conatct Tongke.
Note before order
1.The temperature of medium shall not be higher than 60 .
2.The medium shall be neutral and PH value between 6.5~8.5. If the medium is not consistent to the requirements, specify in the order list.
3.For VTP type pump, the content of suspended substances in the medium shall be less than 150 mg/L; for VTP type pump, the max. Diameter of solid particles in the medium shall be less than 2 mm and the content less than 2 g/L.
4 VTP type pump shall be connected with clean water or soapy water outside to lubricate the rubber bearing. For two stage pump, lubricant pressure shall not be less than operational pressure.
Seawater desalination plant or salt water pump
Municipal engineering
City flood control and drainage
Industry plant
Industrial architecture
Sewage treatment engineering
PROJECT NO.1
PROJECT NO.2 VTP pump for sea water plant 
PROJECT NO.3 VTP pump for Petrochemical Works
PROJECT NO.4 
Centered around technological innovation and pursuing superior quality
To be a world-class provider of fluid transfer solutions
Shanghai Tongke Flow Technology Co., Ltd is a technology-based enterprise integrating technological innovation and environmental protection concepts. Since its establishment in 2001, it has always been committed to the cutting-edge research and development and production of fluid conveying products and intelligent fluid equipment, and has been deeply engaged in the field of enterprise energy-saving transformation services. Adhering to the original intention of green development, the company continues to promote the energy-saving and environmental protection upgrading of cutting-edge technology products, and continues to lead the industry innovation trend.
Tongke Flow Technology, as the supplier of a full range of Fluid equipment solutions in the industry, is not only specialized in manufacturing comprehensive fluid equipment products including pumps, motors and efficient control systems, but also adept in customizing high-quality and feasible technical solutions according to client needs to help the efficient operation of enterprise projects and achieve a win-win situation of economic and environmental benefits.
The company has strong technical support, and has created an interdisciplinary and high-quality technical team relying on the rich resources of Shanghai Tongji Nanhui Science and Technology Park, including doctoral supervisors, professors, senior engineers and many senior engineers. They provide inexhaustible driving force for the company's technological innovation and product upgrades by virtue of their profound professional knowledge and rich practical experience.
In terms of production, Tongke Flow Technology shows excellent manufacturing capabilities. Since 2010, the company has established modern production bases in Shanghai, Jiangsu, Dalian and other places, with a total area of 25,000 square meters, production facilities area of more than 15,000 square meters, equipped with 5 efficient production lines, fully covering the pump, motor, control system and other full range of fluid equipment products, to ensure high quality and high efficiency products.
Tongke Flow Technology, excellence in manufacturing. We strive for perfection in every aspect of production and offer comprehensive testing and inspection services to ensure product quality. Customer satisfaction is the gold standard by which we measure our product quality and is the driving force behind our continuous improvement.
In terms of service, Tongke Flow Technology covers major cities all over the county with its business network, and its clients are involved in many fields. The company has successfully carried out technological transformation for nearly 20 large state-owned enterprises and joint-stock enterprises in the Yangtze River Delta, Pearl River Delta, Central China and North China. Our solutions have not only brought significant economic benefits, but also won widespread social praise, especially in the chemical, chemical fiber, steel, fertilizer, pharmaceutical, thermal and other industries.
Looking at the way forward, Tongke Flow Technology will continue to adhere to the core values of professionalism, innovation, and service, and provide clients with high-quality and modern fluid technology solutions by manufacturing and product teams under the leadership of the professional leadership team to create a better future.
ENTERPRISE QUALIFICATION
Since its inception, our company has steadfastly adhered to the core purpose of "focusing on technological innovation, striving for quality enhancement, and committing to providing professional services to solve customer issues." We have continually refined our skills and strengthened our brand image. Over the years, we have not only received numerous authoritative certifications and accolades but have also successfully passed the stringent certifications of ISO 9001-2015 International Quality Management System, ISO 14001 Environmental Management System, and ISO 45001. Occupational Health and Safety Management System. We consistently adhere to international standards, ensuring the stability and reliability of our product and service quality, winning widespread acclaim and trust in the market.
