Audited Supplier
Huawei U1960 (hereinafter referred to as U1960) is Huawei's core voice switching device, which provides professional IP voice solutions and unified communication solutions for enterprises with less than 1,000 users.
U1960 adopts wide narrow band-integrated design with high integration. Digital, analog, and SIP trunks can be used to connect to carrier networks or private network voice switching equipment, supporting mixed access of analog phones and IP phones.
The U1960 features modularity, simple installation, and hot-swappable boards. Graphical configuration for easy deployment and maintenance.
High integration and impressive array of functions
• Extensive IPT services
• built-in hign-fidelity audio conferencing, with multiple conferencing modes available
• One Number Link You (ONLY), allowing users to answer incoming calls from anywhere, at any time, in the way that lisers prefer
• Built-in voice mailbox, recording messages from unanswered callers so users never miss any important calls
• UC application extension
Effective cost control
• Number analysis and whitelist/blacklist
• 32-level customized call rights
• Password-based call barring
• Intelligent routing, saving communications costs
Quick deployment and easy maintenance
• GUl-based deployment tools for easy and quick installation
• Unified network management system, helping improve management and maintenance efficiency
• Built-in web management system for convenient operations
High stability and high reliability
• 99.999% carrier-class reliability
• Redundancy backup for key modules
| Specifications | Functions and features |
| Single user capacity | 1,000 (up to 1000 IP users/192 local simulated users) |
| terminal typ | Analog phone, IP phone, video phone, soft terminal |
| trunk interface | Maximum 72 channels of FXO, maximum 28E1/T1 interface, maximum 24BRI interface |
| signaling protocol | PRI, QSIG, SS7, R2, SIP, BRI |
| codec format | G.711a/u, G.729a/b/ab, iLBC, G.722/G.722.1/G.722.2, Opus |
| Number of conference channels | A maximum of 360 participants, a maximum of 120 venues, and a maximum of 60 parties in a single venue |
| Voicemail | Maximum support for 30 concurrent channels of built-in voicemail Built-in 16G SD memory card |
| power supply | AC: 100V~240V: 50HZ/60Hz DC: -38.4V~-60V, typical value -48V Support dual power modules, 1+1 backup |
| power consumption | 220W (full configuration) |
| Dimensions (WxDxH) | Standard 19-inch 2U chassis 442mm x 310mm x 86.1mm |
| weight | 10kg (full configuration) |
| Environmental indicators | Temperature: Storage temperature:-40ºC~70ºC Long-term working temperature: 0ºC~45ºC Short-term working temperature: -5ºC~55ºC Humidity: Working Humidity: 5%~95% RH, non-condensing Dustproof: the working environment should be dustproof, and the concentration of particles in the air is less than 180 mg/m3 |
| system reliability | >=99.995% |
| maintainability | Support centralized/remote device management, log management, resource management, alarm management |
The chassis can be installed in a 19-inch cabinet that complies with IEC (International Electrotechnical Commission) standards
The U1960 and U1981 can be configured with dual power modules. By default, there is a single power supply module, which is located in slot 2 of the power supply. When configured with dual power modules, the following functions are available:
•Supports current sharing and backup
During normal operation, multiple power modules can share the load with their own output current; When a power module stops working, other power modules play a backup role and assume their normal power supply tasks.
• Support hot swapping
Without turning off the power supply of the whole machine, the power module can be directly added at the empty slot of the distribution box; In the case of redundant backup of the power supply, a power supply module can be unplugged directly without affecting the normal operation of the device
Business Type: Manufacturer
Number of employees: 1000
Global user coverage: 28M+
Products & Solutions:
Nanjing Deshi Weiye Software Technology Co., Ltd
Headquarters: Room 1405, 14th Floor, North Hall, Block B, New World Center, No. 88 Zhujiang Road, Nanjing, Jiangsu Province
1. Can I get free samples?
We have to charge samples and freight, when you place an order, we will refund your sample cost.2. What is your MOQ?
Any sample test
No MOQ 3.OEM/ODM service available?
Yes, DINSTAR has a strong ability to provide customers with the highest quality ODM & OEM products. It will require a minimum order quantity.
4. For trade terms, such as payment and delivery time?
Payment method: We mainly support T/T bank transfer, PayPal, Western Union method: DHL, FedEx, TNT, UPS, sea freight, or your own
Shipping agents
5. How about the warranty period?
12 months
Although the warranty is not responsible for those who have been broken by violence or renewed with other brands.
