Audited Supplier
The 3D scanning imaging radar level meter, based on terahertz frequency modulated continuous wave FMCW ranging, is driven by a rotating and pitching structure to rotate in multiple dimensions to scan the interior of the silo and the surface of the material with high resolution. Every time the radar sensor reaches a predetermined position/angle, it emits a microwave signal from its antenna. The microwave signal is reflected and received by the antenna after hitting the object to be measured, and then the radar sensor runs to the next predetermined position/angle to complete the measurement of the entire detection cycle, thereby obtaining the level measurement information corresponding to each position/angle in the entire detection cycle. By using the information of each position/angle and the level measurement information corresponding to each position/angle for calculation and processing, a three-dimensional spatial coordinate system is established to obtain three-dimensional points. Cloud coordinate values are used to achieve 3D modeling, Generate three-dimensional visualization images and calculate relevant parameters such as volume, mass, and material level.
After one detection cycle is completed, the measurement for the next detection cycle will be carried out. This measurement process will continue to repeat until a stop command is received from the host's upper computer software.
1. Adopting advanced technology, with higher resolution and more stable detection performance;
2. Two dimensional axial 360 ° scanning for high-precision imaging of targets;
3. The antenna beam angle is small, the measurement is more accurate, and the detection distance is longer;
4. Equipped with WiFi debugging function, it can directly debug parameters through wireless connection;
5. Work 24/7, unaffected by environmental factors such as rain, dust, light, temperature, etc;
6. The maximum detection distance is 50 meters, suitable for long-distance detection of large warehouses;
7. Supports RS485 and Ethernet communication, and can quickly output point cloud information.
| Modulated Waveform | FMCW |
| Antenna Angle | 2° |
| Horizontal Scan | 360° |
| Vertical Scan | 180° |
| Measurement Volume Accuracy | 2% |
| Refresh Rate | ≥5~10s |
| Working Voltage | 24V~36V DC |
| Power Waste | ≤30W |
| Ambient Temperature | -40ºC~+85ºC |
| Scan Points | 60000 points |
| Scanning Speed | 5-10s |
| Scanning Point Cloud Transmission | Ethernet |
| Output: RS485 | Average material level, highest material level, lowest material level, volume |
| Output: 4~20mA | Average material level, highest material level, lowest material level, volume |
| Wireless Debugging | WiFi |
Kexiang Automation(Shandong) Co., LTD is committed to becoming a first-class industrial Internet of things visual monitoring system solution integrator.
Kexiang Automation is located in the scenic coastal city of Yantai. Since its establishment, the company has been adhering to the "Customer first, Integrity-based" business philosophy, always adhere to the "Base on products, Build quality" business policy. Our IoT visual monitoring system is based on "Industry 4.0" and was born under the background of "Made in China 2025". It is a 5S industrial IoT control system integrating production process technology, equipment technology, automation technology, Internet operation technology and IT technology.
Our IoT visual monitoring system mainly uses the Cyber-Physical System technology(CPS) to digitize and intelligently optimize the supply, manufacturing and sales information in industrial production, and finally achieve a fast, effective, personalized and visual display monitoring effect.
Q: Are you a manufacturer or trader?
A: We are manufacturer which focuses on sensor and IoT solution provider for 10 years.
Q: How long is your delivery time?
A: It depends on the quantity. Normally it's about a week to two weeks.
Q: How to get quotation?
A: Please tell us the pipe diameter, measuring medium, flow rate, temperature, pressure, connection type and accuracy of the product you need, we will choose the most suitable product for you.
Q:Can I design our own logo or color ?
A:Sure ! we can laser mark your logo on products; OEM and ODM customization are welcomed.
Q:Can I place a small order for the first time?
A:Yes. We have no MOQ limit. Any order means your recognition of us, we believe we will have long-term cooperation.
Q: What is the warranty of your products?
A: Our warranty time is 12 months after shipment.
Q: What's the transport?
A: Express such as DHL, FedEx, TNT, UPS for freight prepaid and we can also use your own courier account to do the freight collect. For more goods we can arrange by air or by Sea.
Q: What are your terms of payment?
A: We could accept T/T, PayPal, Western Union, etc
