Wamit 3000*2000mm 5 Axis 3D Cutting Igems Metal Carbon Steel Water Jet Equipment Cutting Machine

Feature of 5 axis
no obvious dot in dealing with sharp corners or continuous sharp corner, 
Infinite rotation of the C-axis, high rotation speed, improve processing efficiency
Inclination +/- 60°of the A-axis
Technological parametersStrong structural rigidity
In the 420MPa high pressure water recoil force under the action of cutting points offset variation is less than 0.01mm
Small environmental thermal deformation 
Under the change of temperature in the environment of 0-40ºC, the position shift of the cutting point is less than 0.01mm
C axis infinite rotation
C axis infinite rotation can eliminate the return trip to start and stop the high pressure water caused by cutting point hole
Three-dimensional cutting
Cutting function can be realized through a solid, cylindrical mosaic, surface cutting process
Excellent control system
By analyzing the pressure, the thickness of the work piece, the nozzle combination, the abrasive flow and other technological parameters, the mathematical model is established, intelligent calculation, automatic cutting
Support B spline and other complex curve processing, to ensure smooth and smooth movement process
Features such as automatic time delay valve control, parameter management and process database.
Support for automatic sorting, adding the lead cutter line, add a bridge and other graphics editing functions
To solve the problem of water jet inherent taper, to achieve accurate cutting.
 

Advantage:
 
1. we promise 2 years( 2500 hours) warranty always. and have got CE certificate
2. we use flow type cutting head, the cutting efficiency is at least 10% higher.
3. the abrasive sand hopper beside the cutting head is also flow design.
4. we have new technology that can make the machine moving speed is to 20-30m/min. normal speed is 6m/min as you see. if this technology used in pure water cutting, the cutting cost will reduce 50%. if using other materials cutting like glass , marble, steel, the cutting cost will also 20-30% reduced. but of course , the machine with this function price will be a little higher.
5. we use soft cover of the linear guider, can prevent dust away from the linear guider, so keep the linear guider keep precision longer.
6. we assemble an auto oil feeding to linear guider, so customer needn't maintenance the linear guider always.
7. seperated body.
8. we will send a remote control pendent.
9. we have the world most convenient abrasive sand removing system, in the video address, you can check the video. it can be used for any brand water jet cutting machine, maybe you can promote this system in your country and other countries. please check the attachment.
10. we also have one marble mosaic heat press machine,  this is widely used in marble mosaic making factory, I don't know what's the situation of marble mosaic making in your country, in China , our this system sells good. please check the attachment.
11. we don't produce 300mpa and 380mpa pump, we supply 420mpa pump ,but as you see, the price of whole machine is not increased, we hope to provide better cutting feeling to customers.
12. we use variable pump, so can reduce electricity cost for customers.
13. we can do 220V and 415v also.
14. like height tracking system, positioning system , we can also provide.
15. all our components are SCHNEIDER brand
16. the motor and PLC are SIEMENS brand.
17. we can provide 5 axis with 10 degree and 3D 5 axis. we don't provide 4 axis, according to experience, 4 axis cutting head precision keeping time is too short, this will effect customer's using feeling.
18.  use 10mm steel for water tank supporter and use 8mm steel for beam, keep the machine working more stable.
19. imported TAIWAN HIWIN ball screw and linear guider
20. imported USA intensifier and TAIWAN accumulator and high pressure assembly and low pressure assembly
 
  
OIL CHILLER




 FAQ
 
1. What are the benefits of purchasing a water jet cutting machine comparing EDM, Laser, Plasma or Machine tool?