Audited Supplier
A1105
Oxidative Degradable
25037-45-0
(C4h6o3)N
Polycarbonates/PC
General Plastics, Engineering Plastics, Specialty Plastics
Thermoplastic Plastics
Injection
Transparent Color
High Flow Injection Molding Parts
CLARNATE
25kg/Bag, 1000kg/Pallet
PC RESIN
Yantai
3904220000
Product Description
WANHUA Chemical, CLARNATE® A 1105 Polycarbonate Resin
Hoskimi Technology (Shanghai) Co., Ltd. Was established in 2010 and is located in Shanghai Hongqiao West Business District. It provides customers with timely technical service support, diversified multi-brand material supply, and optimal material selection suggestions and combinations. It has modern warehousing services and is committed to providing customers with the best cost-effective solutions and stable & reliable supply resources.
Plowing in the automotive industry for 14 years, has a wealth of experience in the automotive industry development and after-sales service, with Mercedes-Benz, BMW, Tesla, SAIC and other major automotive OEMs and Tier 1 Glammer, Xinquan, Changzhou Interior and other close cooperation, in the project there are many successful cases, such as SAIC RX5, SAIC MG SUV, SAIC Audi A7, Lixiang L6, Mercedes-Benz C. Class, SAIC Motor General Motors and etc.
Q: Where is your company based?
A:Our company located in Room 501, 5/F, Xin'ao Business Building, No. 720 Huajiang Road, Jiading District, Shanghai, China.
Q:What can you buy from us?
A: PC, PC/ABS, Polymethyl methacrylate, ABS, PA, POM, TPE, TPV and Etc.
Q:Can we get your samples?
A:Yes! Samples can be arranged for those available products. The Delivery Fee will be on buyer's account.
Q:What are your terms of payment?
A:T/T, L/C,. Option A:30% pay in advance, 70% before shipping
Q: What is your packing?
A:Basically our packing is in 25/KG bags.
Q:Where is the loading port?
A:Usually Shanghai.
Q:What is the normal lead time?
A: We will send goods to departure port within 5-10 workdays after we receive your payment.
Q:If any quality problem, how can you settle it for us?
A: When discharging the container, you need to inspect all the goods. If any breakage or defect products were found, you MUST take the pictures from the original carton. All the claims must be presented within 7 working days after discharging the container. This date is subject the arrival time of container. We will advise you to certify the claim by third party, or we can accept the claim from the samples or pictures you present, discharging of the container is not included. Finally we will completely compensate all your loss.
General Information
Features •Medium Viscosity •Easy Release
Uses •General Purpose
Appearance •Clear/Transparent
Forms •Pellets
Processing Method •Injection Molding
Features •Medium Viscosity •Easy Release
Uses •General Purpose
Appearance •Clear/Transparent
Forms •Pellets
Processing Method •Injection Molding
| CLARNATE®A1105 | ||||
| Technical Data Sheet | ||||
| Revision Date: 2021-03-01 | NO .WHPCBU_0001 | |||
| Name:A1105 | Version:4.0 | |||
| CLARNATE®A1105 Polycarbonate Resin | ||||
| General Information | ||||
| Features | ·Medium Viscosity | ·Easy Release | ||
| Uses | ·General Purpose | |||
| Appearance | ·Clear/Transparent | |||
| Forms | ·Pellets | |||
| Processing Method | ·Injection Molding | |||
| Typical Properties | ||||
| Test Method | Test Condition | Unit | Typical Value | |
| Physical | ||||
| Melt Flow Index | ASTM D1238 | 300ºC/1.2Kg | g/10min | 9.5 |
| Mold Shrinkage | ASTM D955 | - | % | 0.5-0.7 |
| WaterAbsorption | ASTM D570 | 23ºC,24h | % | 0.2 |
| Density | ASTM D792 | - | g/cm³ | 1.2 |
| Mechanical | ||||
| Stress at Break | ASTM D638 | 50mm/min | MPa | 72 |
| Tensile Modulus | ASTM D638 | 1mm/min | MPa | 2300 |
| Yield Stress | ASTM D638 | 50mm/min | MPa | 65 |
| Yield Strain | ASTM D638 | 50mm/min | % | 6 |
| Strain at Break | ASTM D638 | 50mm/min | % | 120 |
| Flexural Strength | ASTM D790 | 2mm/min | MPa | 97 |
| Flexural Modulus | ASTM D790 | 2mm/min | MPa | 2300 |
| Izod Notched Impact Strength | ASTM D256 | 23ºC | J/m | 800 |
| Thermal | ||||
| Heat Distortion Temp. | ASTM D648 | 1.82MPa;3.2mm | ºC | 130 |
| Vicat Softening Temp. | ASTM D1525 | 120ºC/h;50N | ºC | 150 |
| Date of issue: Mar. 01, 2021 | CLARNATE® | |||
| Version: 4.0 | ||||
| 1 / 3 | ||||
| CLARNATE®A1105 | ||||
| Typical Properties | ||||
| Test Method | Test Condition | Unit | Typical Value | |
| Optical | ||||
| Haze | ASTM D1003 | 3mm | % | <0.8 |
| Light Transmittance | ASTM D1003 | 3mm | % | 89 |
| Refractive Index | ASTM D542 | - | - | 1.586 |
| Flammability | ||||
| Flame Rating | UL94 | 3mm | - | HB |
| UL94 | 1.5mm | - | V2 | |
| Electrical | ||||
| Relative Permittivity | IEC 60250 | 100Hz | - | 3.1 |
| IEC 60250 | 1MHz | - | 3 | |
| Dissipation Factor | IEC 60250 | 100Hz | 10-4 | 5 |
| IEC 60250 | 1MHz | 10-4 | 90 | |
| Volume Resistivity | IEC 60093 | - | Ω·m | 1014 |
| Surface Resistivity | IEC 60093 | - | Ω | 1016 |
| Electric Strength | IEC 60243-1 | 1mm | KV/mm | 34 |
| Comparative Tracking Index | IEC 60112 | SolutionA | V | 250 |
| Processing Condition | ||||
| Drying Temperature | ºC | 120 | ||
| Drying Time | h | 5 | ||
| Injection Temperature | ºC | 280-310 | ||
| Mold temperature | ºC | 80 | ||
| Injection Speed | mm/s | 50 | ||
| For more information about safety and environment, please refer to our MSDS or contact our | ||||
| customer service center. | ||||
| Date of issue: Mar. 01, 2021 | CLARNATE® | |||
| Version: 4.0 | ||||
| 2 / 3 |
Hoskimi Technology (Shanghai) Co., Ltd. Was established in 2010 and is located in Shanghai Hongqiao West Business District. It provides customers with timely technical service support, diversified multi-brand material supply, and optimal material selection suggestions and combinations. It has modern warehousing services and is committed to providing customers with the best cost-effective solutions and stable & reliable supply resources.
Plowing in the automotive industry for 14 years, has a wealth of experience in the automotive industry development and after-sales service, with Mercedes-Benz, BMW, Tesla, SAIC and other major automotive OEMs and Tier 1 Glammer, Xinquan, Changzhou Interior and other close cooperation, in the project there are many successful cases, such as SAIC RX5, SAIC MG SUV, SAIC Audi A7, Lixiang L6, Mercedes-Benz C. Class, SAIC Motor General Motors and etc.
Q: Where is your company based?
A:Our company located in Room 501, 5/F, Xin'ao Business Building, No. 720 Huajiang Road, Jiading District, Shanghai, China.
Q:What can you buy from us?
A: PC, PC/ABS, Polymethyl methacrylate, ABS, PA, POM, TPE, TPV and Etc.
Q:Can we get your samples?
A:Yes! Samples can be arranged for those available products. The Delivery Fee will be on buyer's account.
Q:What are your terms of payment?
A:T/T, L/C,. Option A:30% pay in advance, 70% before shipping
Q: What is your packing?
A:Basically our packing is in 25/KG bags.
Q:Where is the loading port?
A:Usually Shanghai.
Q:What is the normal lead time?
A: We will send goods to departure port within 5-10 workdays after we receive your payment.
Q:If any quality problem, how can you settle it for us?
A: When discharging the container, you need to inspect all the goods. If any breakage or defect products were found, you MUST take the pictures from the original carton. All the claims must be presented within 7 working days after discharging the container. This date is subject the arrival time of container. We will advise you to certify the claim by third party, or we can accept the claim from the samples or pictures you present, discharging of the container is not included. Finally we will completely compensate all your loss.
