Audited Supplier
Water Activated Tape Fiberglass Industrial Strength Pipe Repair Tape with Polyurethane Resin
It's applied to repair plastic, PVC, concrete, ceremic and all metal pipes carrying water, oil, steam and most gases and solvents.
It's easy to use, the repaired items can be returned to service in 30 minutes.
Water Activated Tape Fiberglass Industrial Strength Pipe Repair Tape with Polyurethane Resin
Material: Woven fibreglass fabric impregnated with water-activated resin
Shelf life: Ansen pipe repair tape has a shelf life of approximately 2 years from the date of manufacture, which is located on the foil pouch package
Resin Makeup: Water-activated Polyurethane
Heat Resistance: 150°C (300°F)
Set Time: 30 minutes
Pressure Resistance: Pressure up to 400psi
Water Activated Tape Fiberglass Industrial Strength Pipe Repair Tape with Polyurethane Resin
Technical Data
Water Activated Tape Fiberglass Industrial Strength Pipe Repair Tape with Polyurethane Resin
♦ Useable life:…2-3 minutes, depends on temperature of water and pipework
♦ Intial cure time:… 5 minutes
♦ Full cure time:… 30minutes
♦ Shore D hardness:… 70
♦ Tensile strength:… 30-35MPa
♦ Tensile modulus:… 7.5Gpa
♦ Maximum service temperature:… 150ºC
♦ Pressure resistance:… 450psi (Min wrapping 12 layers around cracked/leaking area)
Water Activated Tape Fiberglass Industrial Strength Pipe Repair Tape with Polyurethane Resin
How to Use it?
* Using gloves, remove bandage from the package. Immerse in temperate water for 4-6 seconds.
* Wrap tightly and quickly,using entire roll extend approx. 5 to 8cm above and below the damage area.
* Wet gloves in water,squeeze and mold tape in the direction of the wrap until resin stops foaming and is set.
* Wait 30min for ANSEN Bandage to set rock-hard.
HINTS AND TIPS:
* A clean, rough surface helps result in a successful repair.
* After pouch is opened, the bandage will start to set when exposed to moisture in the atmosphere; therefore, it is important to work as quickly as possible.
* ANSEN Bandage has a 3-5 minute work life, with full cure in 30 minutes. Water temperature can affect the bandage cure time. Colder water can result in a slower curing time, warmer water temperatures can result in a faster cure time.
* Large applications may require multiple bandages.
Ansen Size(The length can be produced as your request, the max length is 15 meters)
| Other Best-selling Sizes | |
| 2inch wide | 5cm x 1.8m |
| 3inch wide | 7.5cm x 2.7m 7.5cm x 3.6m |
| 4inch wide | 10cm x 3.6m 10cm x 4.8m 10cm x 5.0m 10cm x 6.1m 10cm x 9.1m 10cm x 13.7 10cm x 15.2m |
| 5inch wide | 12.5cm x 10m |
| 6inch wide | 15cm x 7.6m 15cm x 10m 15cm x 13.7m |
ter Activated Tape Fiberglass Industrial Strength Pipe Repair Tape with Polyurethane Resin
Why choose us?
♦ Prompt and efficient response-- 24hours * 7days online
♦ Technical support
♦ OEM available
♦ Fast Delivery Time(5~15 days)
Water Activated Tape Fiberglass Industrial Strength Pipe Repair Tape with Polyurethane Resin
Packaging & Shipping
Each Fiberglass fix pipe tape is wrapped individually in a bag with outer package
Packing information as below:
Aluminum Plastic Bag
Hard Inner Box
Outside Corrugated Carton
10bags/box, 9boxes/ctn.
Water Activated Tape Fiberglass Industrial Strength Pipe Repair Tape with Polyurethane Resin
Water Activated Tape Fiberglass Industrial Strength Pipe Repair Tape with Polyurethane Resin
Company Information
Ansen Medical Technology Development Co,.Ltd, as a professional manufacturer and exporter, devoted in scientific research and exploitation of orthopedic disposable products.
At present ,with the cooperation with LAb Equipemnt &Reagentsgonts of America, the scientific research laboratory was set up which would continually engage in the development of product exploitation.
Water Activated Tape Fiberglass Industrial Strength Pipe Repair Tape with Polyurethane Resin
FAQ
1. Are you a trading company or a manufacturer?
Re: We are a leading manufacturer and have 4 production bases , which located in Xian ,Shaanxi province ;
2. Are samples available?
Re: Of course. Free sample will be sent if you need to check the quality ;
3. What about OEM and ODM?
Re: Both are acceptable;
4. What is your delivery date?
Re: The delivery date depends on quantity. Generally, 3 days can produce 2000 rolls;
5. Do you test all your goods before delivery?
Re: Yes, we have 100% test before delivery ;
6: How do you make our business long-term and good relationship?
Re:1. We keep good quality and competitive prices to ensure our customers benefit ;
2. We respect every customer as our friend and we sincerely do business and make friends with them, no matter where they come from.
Water Activated Tape Fiberglass Industrial Strength Pipe Repair Tape with Polyurethane Resin
Water Activated Tape Fiberglass Industrial Strength Pipe Repair Tape with Polyurethane Resin
