Water Supply Equipment Fire-Fighting Hydrants and Sprinklers for High Buildings

Price $900.00 Compare
Min Order 1 Set
Shipping From Shanghai, China
Popularity 433 people viewed
Quantity
+-
 

Shanghai Liansheng Pump-Making Co., Ltd.

VIP   Audited Supplier 12 years
Profile Certified by SGS/BV
QXQ
>150m
>400 L/min
Motor
Multistage Pump
High Pressure Pump
Clear Water
Horizontal Pump
Closed
Pump, Pumps, Condensate Pump, Slurry Pump, Circulating Pump
Qxq
Red
Cast Iron
100% Cooper Wire
High Pressure
Centrifugal
LYSON or OEM
Wooden Box
ISO9001/CE
Shanghai, China
8413709990
Product Description







Products Name: Dual Power Pneumatic Water System Fire Pressure Water Supply Equipment

Conditions of use: Suitable for conveying the temperature under 60 celsius water and similar to that of liquid water, pump system working pressure of up to 11 bar.

The scope of performance parameter: This series a total of 6 species, 50kinds of specifications and its

performance parameters range:

1 flow Q= 18~108 m3/h

2. Lift H= 30 ~ 160 m

3. Speed n=1450/2900  r/mi8

4. Power P=1.1~ 75kW
 
fault phenomenonfailure causeelimination methods
The manual is normal
Automatic transmission failure
1.No power supply or one or two phase power supply is needed
Check all phases of power supply and restore power supply

 
Water level is too low
Put water in the sink

 
The motor burned
Repair or replace the motor

 
1.Line is loose
Check wiring and tighten connectors

 
2.Frequency converter malfunctionCheck the fault content, check the cause according to the frequency converter manual, and restart after reset.Or disconnect the inverter power supply for a few seconds, the inverter fault reset before starting.
3The frequency converter is damagedRepair or replace
4.Pressure switch damageRepair or replace
5The pressure transmitter is damagedRepair or replace
 6.Switch failureRepair or replace
Pump non - suction pressure gauge pointer to beat violentlyInsufficient water supply for perfusion, air leakage at the connection between pipeline and instrumentCheck pipeline and bottom valve, refill water diversion. Tighten air leakage

The pump consumes too much power

 

Too much flow, impeller wear

 
Check whether the pump shaft is bent, replace the impeller, close the outlet valve to reduce the flow



Message Type
* Message Content
* Name  
* Phone
* Email
* CAPTCHA