Audited Supplier
Wb Fixed TMR Cantilever Load Cell 5t IP66 Shear Beam Sensor
WB Single Ended Shear Beam Load Cell
•Weighing range: 5 tons
| Rated Load | t | 5 |
| Rated Output | mV/V | 0.6 |
| Zero Balance | %R.O. | ±1 |
| Comprehensive Error | %R.O. | ±0.1 |
| Non-linearity | %R.O. | ±0.1 |
| Hysteresis | %R.O. | ±0.1 |
| Repeatability | %R.O. | ±0.05 |
| Creep/30 minutes | %R.O. | ±0.05 |
| Compensated Temp. Range | ºC | -10~+40 |
| Operating Temp. Range | ºC | -20~+70 |
| Temp. effect/10ºC on output | %R.O./10 ºC | ±0.02 |
| Temp. effect/10ºC on zero | %R.O./10 ºC | ±0.02 |
| Recommended Excitation Voltage | VDC | 5-12 |
| Maximum Excitation Voltage | VDC | 15 |
| Input impedance | Ω | 380±10 |
| Output impedance | Ω | 350±5 |
| Insulation resistance | MΩ | ≥5000(50VDC) |
| Safe Overload | %R.C. | 150 |
| Ultimate Overload | %R.C. | 300 |
| Material | Alloy Steel | |
| Degree of protection | IP67 | |
| The length of the cable | m | 5m |
| Wiring code | Ex: | Red:+ Black:- |
| Sig: | Green:+ White:- | |
In the above context, the working principle of the Shear Beam Load Cell for weighing and control is as follows:
Load Sensing: When a load is applied to hoppers, tanks, or the TMR feed mixer, the shear beam load cell detects this load. The sensor contains a shear beam structure that experiences slight deformation under the applied load.
Resistance Change: The load cell typically uses strain gauges to detect the deformation. These strain gauges are bonded to the shear beam, and they measure changes in resistance to determine the applied force or weight. The greater the load, the more pronounced the deformation of the shear beam, resulting in a more significant change in resistance of the strain gauges.
Signal Conversion: The change in resistance is converted into an electrical signal, usually an analog voltage signal. This signal can then be amplified and processed by signal conditioning circuits.
Data Output and Control: Ultimately, the processed signal is sent to a control system (such as a PLC or display) for real-time monitoring and display of weight data. Based on the measured weight, the system can adjust ingredient proportions, mixing speeds, or other operations to ensure precise mixing and control.
With a focus on weighing and force sensor products, we strive for continuous innovation in research and development, professional manufacturing technology, and reliable product quality. We can provide more accurate, reliable, professional products, technical service, which can be applied for varieties of fields, such as weighing devices,metallurgy,petroleum, chemical, food processing, machinery, paper making, steel, transport, mine, cement and textile industries.As a professional manufacturer of core products for weighing and industrial measurement, we recognize our significant responsibility.
| Our advantages: | ||||
| 20 YEARS | ONE-STOP SOLUTION | PROVIDE DESIGN AND CUSTOMIZATION SERVICES | POWEFUL AND PROFESSIONAL TEAM | FASTER AND MORE EFFICIENT WEIGHING |
| After 20 years of product development and manufac turing history,we are rich-ex- perienced and trustworthy in load cells and accessories | We offer complete solutions of full measurement chain weighing and force measurement,which involves aluminum and steel load cells weighing display transmitters and measurement solutions. | We manufacture standard load cell products,which can also be designed and custom- ized according to your special requirements. | We own powerful and profes sional team with numbers of senior expert R&D engineers who focus on machinery,elec tronics,automation and many other directions.With 20years of industrial application accu- mulation, we make the applica- tion more professional. | Our vision is "enjoy fast weighing."We are committed to "faster and more efficient weighing.".and we can provide a series of products and solutions in this regard. |
The sensor products we manufacture include: SINGLE POINT load cells, S-Type load cells, single-ended shear beam load cells, double-ended shear beam load cells, LOW PROFILE DISK load cells, MICRO load cells, as well as WEIGHING MODULES, ON-BOARD WEIGHING kits, TENSION measuring devices, and weighing display transmitters, among other accessories and combinations.
1. What is the MOQ?
If we don't have it in stock, the MOQ is different according different models. If we have it in stock, we can ship you even 1 pc as sample.
2. What is lead time?
If we have it in stock, we can ship it to you within about 3-5 working days.
If we don't have it in stock, the lead time will be 10-30 days normally.
3. What is the express delivery?
DHL, Fedex, TNT ,EMS, UPS etc. We will choose the safe and cheapest way for you to reduce your cost. Economic shipping way: by sea, by air transport .If you place mass order with us, the shipping way of by sea or by air transport will be ideal choice.
4. What is the quality guarantee?
Quality guarantee: 12 months. If the product has quality problem within 12 months, please return it to us, we will repair it; if we can't repair it successfully, we will give you a new one; but the man-made damage, improper operation and force majeure will be excepted. And you will pay the shipping cost of returning to us, we will pay the shipping cost to you.
5. Is there any after-sale service?
After you receive our product, if you have any questions or need any assistance, we canprovide you the after-sale service by e-mail, skype, trade manager, telephone and QQ etc.
