Audited Supplier
HV-80-JP
Coating Production Line
Powder Coating
Steel
CE, ISO
New
PLC Control
5000W
1.2MPa 0~60L/H
1.6mpat0~40m/H
Lijia
Wood
powder feeder, spray gun and control cabinet
Zhengzhou, China
8424899990
Product Description
| Component | Characteristic | Parameter |
| HV-80-JP Control cabinet | 1 Firm design, modular layout and high performance imported PLC control make operation safe and convenient as well as maintenance free. ; 2 Adopting valve, flow switch, pressure switch and sensor entirely imported from Euroamerica with the same quality of those of Euroamerican equipment; 3 Processing parameters are displayed on panel, clear at a glance; 4 Combustion chamber pressure, oxygen pressure, oil pressure and water temperature are monitored in real time; 5 Able to be operated by one touch, simple and rapid, with 7 prompts of security monitoring; 6 Core parts are all of imported brands to guarantee stable and accurate running of equipment. | 1,Control type:PLC control 2,Input power: 5000W 3.Kerosene pressure/flow:1.2Mpa 0~60L/h 4.Oxygen pressure/flow:1.6Mpa 0~40m/h 5.Carrier gas pressure/flow:0.1~0.3Mpa 3~15L/min 9:Main parts origin: Germany, the United States, Japan, Italy |
| Component | Characteristic | Parameter |
| D-3000 Powder feeder |
|
3. Powder drying function: built-in heater 4. Powder cylinder mode: single cylinder type 5, self-cleaning function: yes 6,Volume of powder storing barrel:3.5L 7,Feeding gas: Nitrogen,argon 8,Pressure of feeding gas: 0.15-0.3Mpa 9,The carrier gas flow rate:0~15L/min 10Feeding speed:0~220g/min 11Feeding precision:±1% 12,Powder size :5~150μm |
Characteristics and advantages of HV-80-JP supersonic flame spraying system
1, Solid cabinet design, fuel flow control area, pressure display area, electronic control area are modular layout, panel clear and easy to operate.2. All imported valves, pressure switches, flow switches and sensors from Europe and America are of the same quality as those from Europe and America
3, The use of Japanese mitsubishi high-performance PLC control, after ignition automatically maintain oxygen and fuel, carrier gas flow output.
4. All the internal fuel, oxygen, carrier gas and cooling water connected on the equipment have the detection function to ensure that all preparation processes can be fully tested before ignition.
5. Monitor the running status of the equipment in real time. Once any part is found to be operating beyond the safe range, the whole system will stop sharply, send an alarm and provide fault information.
6. The equipment starts and stops automatically under the control of PLC, which reduces the possibility of operator's misoperation.
7. Communication interface is set up inside the equipment to control the operation of peripheral devices.
8. Signal shielding measures are adopted to protect peripheral devices from electromagnetic interference during high frequency arc ignition.
Pole piece roll requirements:
High wear resistance: the roller is subjected to abrasive wear, adhesive wear, and fretting wear during the working process, and the wear resistance is not enough, which not only affects the accuracy of the roller surface and the quality of the pole piece, but also reduces the production efficiency;
High density: compact structure, low porosity, high corrosion resistance, and also help to prevent pole piece coating and other foreign matter from entering the roller surface;
High precision: the straightness, ovality, and coaxiality of the roller are required to be high, otherwise the thickness of the battery pole pieces will be uneven and the bonding force will be poor.
The company uses HVOF thermal spraying technology to prepare a multi-element metal ceramic composite coating on the surface of a lithium battery high-precision roller, which has the following characteristics:
1. The coating has high hardness, with a microhardness of 1100-1400HV0.3, which has extremely high wear resistance;
2. The coating structure is uniform and compact, with low porosity, (<0.6%), does not stick to the material, and does not react with the battery pole piece material;
3. The coating has high bonding strength, tested with FM1000 glue, and it can reach more than 90Mpa.
4. Subsequent fine grinding by a high-precision CNC grinder to ensure that the straightness, ovality and coaxiality of the high-precision roll are less than 0.002mm
High wear resistance: the roller is subjected to abrasive wear, adhesive wear, and fretting wear during the working process, and the wear resistance is not enough, which not only affects the accuracy of the roller surface and the quality of the pole piece, but also reduces the production efficiency;
High density: compact structure, low porosity, high corrosion resistance, and also help to prevent pole piece coating and other foreign matter from entering the roller surface;
High precision: the straightness, ovality, and coaxiality of the roller are required to be high, otherwise the thickness of the battery pole pieces will be uneven and the bonding force will be poor.
The company uses HVOF thermal spraying technology to prepare a multi-element metal ceramic composite coating on the surface of a lithium battery high-precision roller, which has the following characteristics:
1. The coating has high hardness, with a microhardness of 1100-1400HV0.3, which has extremely high wear resistance;
2. The coating structure is uniform and compact, with low porosity, (<0.6%), does not stick to the material, and does not react with the battery pole piece material;
3. The coating has high bonding strength, tested with FM1000 glue, and it can reach more than 90Mpa.
4. Subsequent fine grinding by a high-precision CNC grinder to ensure that the straightness, ovality and coaxiality of the high-precision roll are less than 0.002mm
