Wear Resistant Steel Pipes Lined with High Hardness 92%&95% Ceramic Tiles

Wear Resistant Steel Pipes Lined with High Hardness 92% 95% Alumina Ceramic Tiles

Company Profile

Company name: Zibo Qimingxing New Material Incorporated Co.,Ltd

1.Established in 1997,25 years experience in wear solutions products.
2.Factory is under expanding, the total construction area is 50,000 sqm.
3.ISO9001:2015 certified,over 400 staffs.
4.Three Own-designed production lines, the ball mils are own produced.


QMX is manufacturer, supplier, exporter of ceramic lined components, ceramic lined products, ceramic lined bends,ceramic lined pipes, etc. Ceramics is produced from high purity fine grain aluminum oxide. The necessary forming of shapes is done in its green or pre sintered phase. The products are then sintered in a kiln at extremely high temperature.

QMX manufactures ceramic tiles in the form of weldable and pastable tile as well as pipe sections of various diameters for installation at site and more specifically for lining of fabricated pipes, bends and fittings for pheumatic conveying applications specially for conveying of pulverised coal in thermal power plants.
This sinteredproducts consist of dense alumina with hardness of approximately 9 Mohs and can withstand temperature up to 1000C

Product Catagory

Wear  Resistant Ceramic Liners

our ceramic range has three different alumina composition (92%, 95% and ZTA) products to suit the various mining applications.The products have high density, high hardness, low wear loss, anti corrosion, long using life properties.

Specification:

Character	92	95	T95	99	ZTA	ZrO2
Density(g/cm³)	≥3.6	≥3.65	≥3.7	≥3.83	≥4.15	≥5.9
Al2O3(%)	≥92%	≥95%	≥95%	≥99%	≥75%	/
ZrO2 +Y2O3	/	/	/	/	≥21%	≥99.8%
Bending Strength(MPa)	≥220	≥250	≥300	≥330	≥400	≥800
Compressive Strength (MPa)	≥1050	≥1300	≥1600	≥1800	≥2000	/
Fracture Toughness(MPa.m1/2)	≥3.2	≥3.2	≥3.5	≥3.5	≥5.0	≥7.0
Rockwell Hardness HRA	≥82	≥85	≥88	≥89	≥90	≥88
Vickers Hardness HV20(MPa)	≥950	≥1000	≥1100	≥1200	≥1400	≥1100
Wear Volume(cm³)	≤0.25	≤0.20	≤0.15	≤0.10	≤0.05	≤0.05

Composite Ceramic Liners 

ceramic wear liners range include composite ceramic liners or Steel backed and studded as per requirements. We also have a range of molded ceramic in rubber with CN backing. The liners can be customized depending on the application.

 Lining rubber is designed primarily to be applied as a lining to protect your equipment from the damaging effects of abrasion and impact forces or chemical attack.

Ceramic Rubber Hose

Features:
>Abrasion Resistance
>Composite of alumina ceramics and rubber with high elasticity and strength for inner material
>Excellent abrasion resistance against dry abrasion
>Inner rubber layer
>Inner rubber is complied by composite of Hex ceramic tiles and binder rubber with strong adhesion

The compound is a ceramic bead filled ashesive to apply to areas where tiling is not possible or effective. It has wear resistant qualities, is easy to apply and used vastly in maintenance of lined areas

RBSIC(SISIC) silicon carbide lining has properties of high strength, high wear resistance, corrosion resistance high temperature resistance, which has been widely used as the liners or parts in coarse particles classification, concetration, wear resisting lining of hydraulic cyclones, flue gas desulphurization pipes, coal slurry conveyor pipelines, washing and mineral processing industry

Specific Density: 1.3Kg/L
Shore A Hardness: 35-95
Akron Abrasion: <0.053(cm3/1.61km)
Working Temperature: -25-80degree
Expansion Strength: 70KN/m
Tear Strength: 40-100KN/m
Tensile Strength: 30-50MPa
Deformation: <8%

1. Are you are trading company or a factory? 
We are a leading factory, manufacturing high alumina ceramic wear resistant liners in Zibo, China 

2. What is your monthly capacity? 
800 ton per month 

3. What kinds of ceramic wear resistant liners do you manufacture? 
92%alumina liner, 95%alumina liner, T95%alumina liner, zirconia tile liner, ZTA tiles , ceramic-rubber composite plates, wearing compound 

4. What is the delivery time? 
If we have stock, the delivery time is within 3days after order confirmed. If there is no stock, it is usually 13days. 

5. Can you manufacture ceramic liner according to customers' desgin? 
Yes, we have 5 engineers and we can produce ceramic parts according to the drawings of the customers. 

6. What is the packing? 
carton, and then wooden pallet or wooden box, 20~25tons per 1*20"FCL 

7. What is the nearest port? 
Qingdao port