Audited Supplier
The ice machine surface through a special process, blade made of high quality stainless steel and refined, easy to wear. The machine also has a beautiful appearance, high crushed efficiency, simple operation, safe, durable advantages.
Procedure:
1, Before using, please read this manual to understand the structure and performance of the machine, familiar with the machine's main components and related security operations to better play its advantages, to achieve satisfactory results.
2, the machine should be installed in a sufficient supporting force table and the ground there is a proper distance.
3, before power, check the power supply voltage is used, and this machine is consistent with the voltage, outlet compliance with safety standards, and has been installed leakage protection switch and take a good ground. Confirm all meet the electricity requirements.
4, before the boot, the first to break the ice about 20 mm in diameter, can be placed into the barrel, the upper convex through the barrel mouth is appropriate. Note that the first opening of the power switch, to be the driving force of the motor to rotate the disc after the charge allowable dynamic binder cover plate pressed down on the handle, then fastened by rotating cutter blade on the ice chopped. But operating binder cover when pressed down on the handle can not be too much force, so as not to damage the motor turn the motor block. And should pay attention to the balance of the reduced ice feed replenish new ice slug.
5, ice chopped through the discharge port flows into the dish. Pay attention to the discharge port of the material smoothly, can not be blocked, otherwise it will cause stuck knives, burn out the motor. Cutter found to be stuck, you should immediately lift the binder cover handle, turn off the switch, unplug it, and remove the fault.
6, ice thickness is possible by adjusting the height of the protruding cutter blade opening to achieve, first remove the plastic disk protection when adjusting the switching device, loosen the screws fixing elbow, pull out the barrel, and then release Cutter fastening screw and remove the cutter, and then release the blade clamping screw, according to your requirements, in place, and then sequentially knife disk, etc. can be back in place.
ETON most newly design product.
Elegant shape.
Wide application, hygiene, safe and easy to operate.
uangzhou ETON Electromechanical Co., Ltd is a leading company that mainly focuses on producing high quality electromechanical products, especialy for Food machinery and Packing machinery.
Our company has a large number of management and technology staff who have high degree and high technical post title, after many years' training, our company has won a working group with good technology and high job diathesis.
Our company has heavy oil hydraulic press machine of 500 tons and a series of advanced manufacturing equipment and exact detectingequipment, the area of the workshop is over 40000 square meter.
In order to meet the world market demand, our company passed the international quality inspection of ISO 9001:2000 in 2003, many products get the "CE" certificate awarded by the Europe Alliance and the CTA certificate awarded by China Products Quality Monitoring & Inspection Alliance, also get the reputation of "High Grade supplier of China".
With all the staff's long time persistent efforts, our product quality keeps continuously improving, we got 15 patents for many products early or late, the pertinent country departments conferred us "China Famous Products" , "China Famous Brand" honorable titles, we got the "An enterprise of the AAA Quality & Credit of China" for the late three years. Our company also is one member of "China consumer right vindicating league" at the same time.
Our company has independent import & export licence, the products can be sold to 48 countries overseas, such as Europe, South America, North America, Oceania, Middle east, Africa, 10 countries of East Alliance, and our products are all warmly welcomed.
