Audited Supplier
The whole milk powder is produced with pure milk, which basically maintains the original nutrients in the milk, the protein is not less than 24%, the fat is not less than 26%, and the lactose is not less than 37%. It takes about 8-9 kilograms of milk to produce 1 kilogram of whole milk powder. When it is eaten, it needs 8 times of warm water for each milk powder. Full fat is higher than low fat and skim.
Whole milk powder is made from fresh milk by disinfection, dehydration and spray drying. Due to the spray drying treatment, the protein clot is small and soft, easy to digest compared with fresh milk, and has been sterilized and disinfected, suitable for infants.
However, volatile fats, sugars and vitamins have decreased. When prepared, the weight ratio is 1:8, and the ratio is 1:4, which is reduced to the original fresh milk. Feeding methods are fed with fresh milk.
| Item | Specification | Results | Methods |
| Appearance & Color | Milk White Fine Powder | Conform | GB5492-85 |
| Odor & Taste | Characteristic | Conform | GB5492-85 |
| Protein | ≥5% | Conform | GB/T5009.5 |
| Fat | ≥30% | Conform | GB/T5009.6 |
| Mesh Size | 95% Through 80 Mesh | Conform | GB5507-85 |
| Moisture | ≤5.0% | 1.18% | GB/T5009.3 |
| Ash Content | ≤5.0% | 0.73% | GB/T5009.4 |
| Pesticide results | Meet USP 561 Requirements | Conform | USP |
| Heavy Metals | |||
| Total Heavy Metals | ≤10ppm | Conform | AAS |
| Arsenic (As) | ≤2ppm | Conform | AAS(GB/T5009.11) |
| Lead (Pb) | ≤2ppm | Conform | AAS(GB/T5009.12) |
| Cadmium(Cd) | ≤1ppm | Conform | AAS(GB/T5009.15) |
| Mercury(Hg) | ≤0.1ppm | Conform | AAS(GB/T5009.17) |
| Microbiology | |||
| Total Plate Count | ≤10,000cfu/g | Conform | GB/T4789.2 |
| Total Yeast & Mold | ≤1,000cfu/g | Conform | GB/T4789.15 |
| E. Coli | Negative in 10g | Conform | GB/T4789.3 |
| Salmonella | Negative in 25g | Conform | GB/T4789.4 |
| Staphylococcus | Negative in 25g | Conform | GB/T4789.10 |
Full-fat milk powder contains high-quality protein, fat, multi-vitamin and minerals such as calcium, phosphorus and iron in milk. It is a good nutrition for daily drinking. It can prevent dry and dull skin and make skin fair and shiny.
It can also be supplemented with rich calcium, suitable for people who are deficient in calcium, children, irritability, insomnia, and people with high work pressure. Whole milk powder is prepared by sterilizing fresh milk, concentrating, spraying and drying.
After the fresh milk is processed into milk powder, the moisture is reduced from the original 88% to 2% to 5% (bottled), and the contents of nutrients such as protein, inorganic salt and fat are concentrated. For example, 3.3 grams of protein per 100 grams of milk, and 26.2 grams of 100 grams of whole milk powder; 4 grams of fat per 100 grams of milk, and 30.6 grams of 100 grams of whole milk powder;
Calcium, phosphorus, iron, vitamin A, B1, B2, PP and other content increased.
CHONG QING(CQ) HAI CHEMICAL CO.,LTD i is a professional chemical company in China. Specializing deal and export
various kinds of quality chemicals since 2010. The products Include industry chemical, Animal feed additive, Food
additive, Agrochemical, Fertilizer, pharmaceuticals, water treatment and Detergent ,Minerals etc. Our management
team has over 14 years of combined expertise meeting the needs of clients. We are proud our quality chemcials and
service was approbated by the clients in the worldwide.
CHONG QING(CQ) HAI CHEMICAL CO.,LTD is an ISO9001:2008 certificated organization. We alway pay attention to the
quality control. For us, quality means satisfied clients. Only by constantly improving our internal and external
procedures are we able to remain a reliable supplier of chemicals for our clients worldwide. Every step of the
distribution chain is constantly checked and rechecked to guarantee the quality. Through continuous improvement in
quality and service, we will provide our customers with products of optimum quality consistent with their
requirements.
Besides the quality, we think the competitive price of goods is also important. Our comprehensive distribution
network, buying power and efficient inventory management system allow us to offer our products at the best possible
prices. Our principle is: Quality Chemicals With Competitive Prices - We Supply!
Up to now many of our chemicals have been done REACH final registration. It is convenient for the clients to use
our chemicals in Europe market.
Your satisfaction is our most interested thing. Also your any suggestion will be highly welcome by us. Now enjoy
your visiting and hope to hearing from you!
Q1.What is the Trade Term?
A1:Ex-work factory , FOB Qingdao, FOB Shanghai,FOB Fujian, CIF
Q2. How long is the guarantee (period)?
A2:One years quality warranty .
Q3: Can I get samples?
A3: Yes, we can supply free sample, you pay for the freight charge only.
Q4: How to pay?
A4: PI will be sent firstly after our aligned products specification. Payment by Paypal , T/T, Western Union,LC,
are ok.
Q5: How is your MOQ?
A5: Normally speaking, our MOQ is 1kg. But we can also accept less quantity such as 100g on the condition that
sample charge is100% paid.
Q6: How can you guarantee the quality of your products ?
1. Our staff are all experienced in chemical products or related major background, they are well trained before
quotation.
2. Free sample or pre-shipment sample are available for our new cooperation before you place commercial order. We
are sure the same specification commercial products as sample to customers
3. Third Party Inspection like SGS can be arranged according to your requirement before shipping.
4. On-Spot QC in our APPROVED associated production bases with necessary certification like GMP, ISO etc.
Q7.How long is our Production leading time?
A7:within 15-20 days upon receive deposit in normal season, and 25-30days in our busy time
(August,September,October).
Q8.What kind of documents we will provide to you?
A8:B/L,Commercial Invoice, Packing List,Certificate of Original. with these documents you or your borker can do the
customs declaration at your side.
Q9. During shipping, if there is a damage to products, how do you get replacement?
A9: During shipping,our shipping angancy will try to ensure the safety of the goods.If there is a damage to
products, they would be responsible for the damage .If it is not a very serious problems,we will help you and
compensate you the damaged parts.
