Audited Supplier
Product Description
Flow range : <450m³/h
Lift range : ≤80m
Max.operating pressure at different fluid temperature : 13bar/16bar
Temperature range : -20ºC~+140ºC
Aplication field :It can be widely used in heating, district heating, air conditioning circulation systems, refrigeration, industrial refrigeration, water supply systems, and irrigation systems.
The Wilo-Atmos GIGA-I offers a wide range of components and materials for a wide variety of applications. It can pump different fluids at temperatures from -20 °C to +140 °C making it particularly suitable for air conditioning and cooling applications. Any condensate that forms can be selectively discharged via an outlet.
Equipped with state-of-the-art pump hydraulics and IE3/IE4 motors, the pump is as reliable as it is energy-efficient.The cast components with corrosion-resistant cataphoretic coating also ensure a long service life.
Your advantages
|
Design
Glanded pump in in-line design with flange connection
Application
The pumping of heating water (in accordance with VDI 2035), chilled water and water-glycol mixtures without abrasive substances in heating, chilled water and cooling systems.
Typekey
Example | Atmos GIGA-I 40/160-5,5/2 |
I | In-line pump |
40 | Nominal diameter DN of the pipe connection |
160 | Nominal impeller diameter |
5.5 | Rated power P2 in kW |
2 | Number of poles |
Technical data
- Permitted temperature range of the fluid: -20 °C to +140 °C
- Max. ambient temperature 40 °C
- Mechanical seal for pumping water up to Tmax = +140 °C. Up to T ≤ +40 °C, a glycol admixture of 20 % to 40 % by volume is permissible. An alternative mechanical seal must be provided for water-glycol mixtures with a glycol content of > 40% to max. 50% by volume and a fluid temperature of > +40 °C to max. +120 °C or other fluids that differ from water. When using water-glycol mixtures, the use of an S1 variant with a corresponding mechanical seal is generally recommended.
- Mains connection 3~400 V, 50 Hz (others on request)
- Protection class IP55
- Nominal diameter DN 32 to DN 250
- Standard version for operating pressure: 13 bar (up to +140 °C) / 16 bar (up to +120 °C)
Materials
- Pump housing and lantern: Standard: EN-GJL-250;
- Impeller: Standard: EN-GJL-200; special version: Bronze CuSn 10 stainless steel 1.4408
- Shaft: 1.4122
- Mechanical seal: AQEGG; other mechanical seals on request
Construction
Single-stage, low-pressure centrifugal pump in in-line design with
- Mechanical seal
- Flange connection with pressure measuring connection R 1/8
- Lantern
- Coupling
- IEC standard motor
Scope of delivery
- Pump
- Installation and operating instructions
Options
- …-L1 variant with bronze impeller (at additional charge)
- …-L4 variant with stainless steel impeller (at additional charge)
- ...-P6 variant in back pull-out design and with cartridge mechanical seal
- …-H1 variant with housing made of ductile cast iron on request
- …-P4 variant for max. operating pressure of 25 bar on request
- Other voltages and frequencies as well as ATEX approval on request
