1.Fully sealed stainless steel and tempered glass composed of hard cabin structure, cabin body with 31 6L stainless steel integral welding, the inner cavity of the arc Angle of the inner Angle, easy to clean, sterilization operation.
2.Fully unidirectional airflow mode provides excellent aseptic operation area.
3.The airflow mode is vertical unidirectional airflow, which can quickly eliminate biological pollutants during ventilation.
4.The material door adopts inflatable sealing method, with pneumatic locking and working state interlocking function.
5.Integrated/independent hydrogen peroxide disinfection and sterilization can effectively reduce the pollution of bioactive substances up to 106.
6.Integrated YT-601B aseptic testing system to reduce the volume of operation space.
7.The system uses Siemens PLC control, integrated signal acquisition, real-time data display, high and low voltage alarm, data record storage and printing and other functions.
8.Hourly leakage rate ≤ 0.5%, absolutely ensure product quality reliability and operator safety, testing according to IS014644-7.2004 and GB/T2591 5.7-201 standards.
9.According to the characteristics and requirements of different processes, we can provide special design systems and configurations, which are suitable for different batches and processes.
10.The aseptic transfer chamber can continuously decontaminate the surface of articles, avoid contamination caused by material transfer, and meet the needs of rapid multi-batch experiments.
11.Positive and negative pressure can be adjusted, which can be used for aseptic detection, positive bacteria detection, aseptic sampling (weighing, packaging), etc.
Voltage:AC380±38V 50HZ± 1HZ | Wind speed: 0.36 ~ 0.54m /s |
power:4000w | Touch display size: 10 "/ 12" touch screen or industrial tablet |
Internal lighting: ≥500Lux | Pressure control range: -80 ~80pa |
Noise: ≤75dB(A) | Pressure resolution: 0.1 pa |
High efficiency filter: H14 filtration efficiency of 99.995% | Temperature resolution: 0.1 ºC |
Killing rate: The killing ability of thermophilic fat buds was 106 | Cabin purification level: Dynamic Class A |
Airflow model: vertical unidirectional flow |
Pharmaceutical: microbiological limit examination of preparations such as purified water, water for injection, raw materials, oral liquids, tablets, capsules, biological products, etc.
Food: Microbial Limit Test for Beverage and Mineral Purification
- The filter head can be quickly disassembled and can be sterilized by damp heat alone;
- The filter head can be quickly sterilized by flame to facilitate continuous experimental operation.
- Single-sided circular filter for easy replacement.
- LCD display, membrane button control, simple and intuitive operation;
- The filter cup features a unique lip seal design that eliminates the use of clamps and O-rings to ensure leak-free operation and uniform microbial recovery;
- Built-in imported diaphragm liquid pump, direct suction filtration, no need to pump the filter bottle, easy to install and use;
- The triple filter head design can simultaneously filter and improve work efficiency;
- The filter head can be quickly disassembled and can be sterilized by damp heat alone;
- A variety of filter heads are interchangeable, and both 47mm and 60mm filters can be used;
- The pump head can be quickly sterilized by flame to facilitate continuous experimental operation
- LCD with thin-membrane key controller can easily & intuitively operate.
- Filter cup with unique lip-shape sealed design without clamp and O-ring can ensure no leakage and even microorganism recovery rate.
- Disposable filter membrane with pre-sterilization can minimize the main pollution sources and increase detection reliability.
- Imported built-in diaphragm pump can directly pump, filter and discharge liquid without pumping & filtering bottle for easy installation and usage.







Q: Do all products have English operating interfaces and operating manuals?
In addition, there are are operating videos for our products for the convenience of customers to use.