Audited Supplier
s-380 edge banding machine
2 Years
Pre Milling, Gluing, Edge Banding, End Trimming, Rough Trimming, Fine Trimming, Scraping, Buffing
Linear Edge Banding Machine
0.4-3mm
Automatic
18-32m/Min
CE, ISO
10-60mm
150mm
60mm
Glue Tank Overhead
Customized
Onlinn After-Sale Sevice
Edge Banding Machine
Approx.6200
380(Customized)
23
100 X 6
≥0.6
900
Touch Screen
Included
PUR No-Clean Glue Pot + Vertical Glue Port
Encoder + Electric
0.55kw + RV40 Reducer
0.75kw
7.5kw
Scraper Blade Radius R1.5
TQS
Package
12000L * 850W * 1700H
China
84659900
Product Description
| Technical Parameters | |
| * Processing Information | |
| Board Length [mm] | ≥150 |
| Board Width [mm] | ≥60 |
| Board Thickness [mm] | 10-60 |
| Edge Banding Width [mm] | 12-65 |
| Edge Banding Thickness [mm] | 0.4-3 |
| Feed Speed [m/min] | 18-32 |
| * Working information | |
| Input Voltage [V] | 380 |
| Total Power [KW] | 23 |
| Dust Extraction Port [mm] | 100 x 6 |
| Air pressure [pa] | ≥0.6 |
| Work Table Height [mm] | 900 |
| * Machine | |
| Dimensions [mm] | 12000L * 850W * 1700H |
| Weight [KG] | Approx.6200 |
| Configuration Information | |
| Display | 24Inch |
| Control System | TQS Edge-System |
| Lift Mode | Encoder + Electric |
| Glue Pot: | PUR No-clean Glue Pot + Vertical glue port |
| Spraying Device | Separating agent, Cleaning agent |
| Pre-milling Device | Motor*2 Power:2.2KW*,200hz,12000rpm/min |
| Diamond pre-milling blades *2 Specifications: φ125mm x φ30mm x H40mm | |
| Electronic Pneumatic Control for Intermittent milling control | |
| Feeding guide plate adjusts the pre-milling amount | |
| Purge and blow, independent dust hood | |
| Pressing Device (Five-Roller) | Active pressure Roller *1 Diameter 100mm (with scraper) |
| Driven pressure Rollers *4 Diameter 70mm (2 with taper, 2 straight wheels, with scraper) | |
| Driven glue Roller *1 Diameter 70mm (with scraper) | |
| End cutting Device | Motor *2 Power: 0.37KW |
| Linear guide and slider (double guide) | |
| Saw blade*2 Specifications: 104*2.6*22*24Z | |
| Minimum board spacing: 450mm | |
| Rough Trimming Device | Motor *2 Power: 0.75KW Frequency: 300hz Speed: 18000rpm/min |
| Rough trimming blades *2 Specifications: Flat blade 6T | |
| Independent dust collection covers *2 | |
| Fine Trimming Device | Motor *4 Power: 0.75KW Frequency: 300hz Speed: 18000rpm/min |
| Fine trimming blades *2 Specifications: Radius R1.5, 6Z | |
| Independent dust collection covers *2 | |
| Four motors corner rounding Device | Motor*2 Power:0.37KW Frequency:200hz Speed: 18000rpm/min |
| Profile milling cutter*2 Specification: R2 6Z | |
| Plane connecting rod mechanism | |
| Pneumatic profile scraping device | |
| Flat scraping Device | Flexible |
| Buffing Device | Buffing |
| Motor *2 Power: 0.37KW | |
| Automatic Lubrication System | Included |
| Encoder/PLC | INOVANCE |
| End cutting cylinder,Corner rounding cylinder | AIRTAC |
| Guide rails | TBIMOTION TBI |
| Other cylinders, air source processors, air pressure switches, regulating valves, solenoid valves | AIRTAC/EMC |
| Relays/Contactors/Limit Switches | Schneider |
| Pre-milling,End cutting Trimming,Corner rounding Motor | TQS CNC |
| Lifting Motor | 0.55KW + Rv40 Reducer |
| Gluing Motor | 0.75KW |
| Conveying Motor | 7.5KW |
| Intelligent edge banding machine industrial control system The reserved USB data access port can realize flexible edge banding by scanning the code. Adding a help function to reduce production preparation time Control Panel ProgramThe graphic interface facilitates user input through simple guidance and menu prompts. Function summary: conveyor switch, power switch, emergency button, USB data interface, parameter setting, IO diagnosis, alarm record, function selection, production report, melt data, conveyor speed, edge thickness, auxiliary function, cleaning device, pressure beam lifting, voltage monitoring, current monitoring... | Heavy-duty belt pressure beam Heavy-duty belt pressure beam is the core component to provide stable edge banding. The heavy-duty belt pressure beam(460mm)is the core component that provides stable edge banding. It applies uniform pressure on the board and ensures the best adhesion even for small boards. Good adhesion is extremely important for achieving good edge banding effects. It can effectively reduce the damage to the workpiece, such as high-gloss boards. It can do much stable feeding, avoiding problems such as board displacement. | Pre-Milling Unit Precision is the basis of high standards Pre-milled units are the standard for high-quality panel edge banding and provide the perfect basis for chip-free edge banding and glued joints. For uneven boards or ripples, burrs or non-vertical phenomena caused by cutting saws and cutting saws, they are re-modified to make the board sealing surface flat and make the edge banding and workpiece fit tightly. |
| Double Rail End Cutting Unit Cuts off the excess edge band at both ends of the workpiece. The end cutting unit prepares the workpiece for further finishing. The straight-line rails and sliders are highly precise and durable, with an automatic oiling system to extend the machines lifespan. It quickly cuts the front and back edge bands, with precise pneumatic control positioning, allowing for more stable processing of shorter and thicker workpieces. | Heavy-duty support columns + Rv40 reducer Ensuring the parallelism and tightness between the guide rail and the pressure beam, also can fully absorb all vibrations generated during the processing. | Fine Trimming Device Trim the excess edge types that protrudes from the upper and lower boards of the wooden board into an R-angle shape so that the upper and lower edges of the edge tapes are flush and smooth with the upper and lower surfaces of the wooden board. |
| Corner rounding unit Four-knife high-speed corner rounding - for corner radius The four-knife high-speed corner rounding has the advantages of high speed (single-opening maximum 30 meters/minute) and stability. The independent four-motor synchronous rotation processing, through the combination of tools to round the front and rear ends of the plate, make the edge corners and end faces of the workpiece smoother and more beautiful. | PUR no-clean glue pot Even glue output, better edge banding effect The glue-applying shaft adopts the cross-grain and mesh technology, making the glue application more delicate and smoother Photoelectric infrared sensor accurately controls the glue residue, and automatically supplies/stops glue to keep the glue of the glue-applying shaft fresh, effectively saving costs Automatically removes dust according to the program setting of the number of glue-applying workpieces to avoid debris in the edge banding process that affects the edge banding quality | PUR supply machine* two colors Progressive heating and melting During hot melting, the glue is isolated from the space and coated with a Teflon protective layer to prevent carbonization and reduce clogging Stepless adjustment of glue output The main motor is humanized and has a protective function Glue shortage alarm function |
| E-350PC Automatic Edge Bander | E-280 Automatic Edge Bander |
1. What's your guarantee? Which type after sale service can you provide to us?All the machine, we can offer the 1 year guarantee to our customers; any parts damaged due to the quality issue, we will send the parts via DHL, Fedex or air shipment urgently.
After sale service: if you purchased our CNC nesting center or edge bander, and we don't have any dealer or agent in your region, we will send our engineer to your site for installation and training ( you should pay the round-trip flight ticket, salary of engineer- each day 100.00USD, also take charge of the local accommodation. ). Considering the situation, we can do the online training. Also any small issues, you can knock us online, we will offer the rapid action to your concerns.
2. Which type payment term can you accept? How could we keep our capital safe?
We can accept the T/T and L/C at sight. We have more than 10 years exporting experience, so we know more about the capital safty concern of our customer. We will offer the video call or pictures to your side, during our loading, then you can check what we have done for the loading, if any cheating, then you can control your payment (T/T or L/C).
3. What is the leading time, if we did the payment to your side?
The leading time of most common machines, will be 10-25 days after collecting the down payment / copy of L/C. Specially designed production will take little bit longer time.
4. Can you accept some O.E. M service to us? or any other service could you do for us?
We have more than 15 years experience in the woodworking machinery industry, also have more than 5 experienced engineers, so we can do the special design according to your requirement.
Also, our exporting team has more than 10 years of experience in this field, so they can help you to purchase relevant products, parts, or tools, which can save your time and your cost.
