Audited Supplier
Online Support
Semi-Automatic
2 Years
STX
Wood Case
China
8465950000
Product Description
Finger Joint Shaper and Press Machine
1.Characteristics
Finger joint shaper line using servo drive, the processing efficiency is 150% higher than normal hydraulic transmission drive.
Finger joint assembler use 6.2m double- unit type. First cut-off then Press. Oil system motor power reach 4KW. Oil cylinder size is Dia.80mm*stroke 130mm. have stronger press power processing Rubber wooden 80mm width *80mm thickness.(96kgs/cm2)
Finger Joint shaper line with high efficiency,usually need 1pcs Finger joint assemblers follow to work. Max. processing 40m/min. One day work 8hours can processing 300Pcs finger joint boards(Material size: 500*50*14mm)
Detailed Images:
Turnover conveyor: two frequency conversion belt conveyors are used to automatically dump the wood 90 degrees through the speed |  |
 | The upper and lower feeding wheels are driven by an independent 1.5KW decelerating motor. In that match with the Chain conveyor which using the reducer motor. ensure the wooden High-speed smooth entry reduces the chance of misalignment The cross beam is equipped with synchronization rod to ensure the synchronization of the whole upper pressure beam and prevent the cylinder damage caused by the extrusion of the upper pressure beam by the side pressure push plate |
| cut-off first then Press joint. There are with one set 5m chain conveyor with double in-feed reducer motor control. let the wooden have enough length (reach 6m) per-joint inside. In that can avoid wrong teeth joint. And use the inventor drive increase the feeding speed. (Chain conveyor use double high-speed reduce motor feeding .increase the processing speed. Also can adjust speed by Delta inventor. The special customized chain drives the wood to run faster and more stably) |  |
Technical Specification:
1.MXZ3515A Finger joint shaper
| Max. working width | 600mm |
| Max. working high | 150mm |
| finger joint teeth length | 12mm |
| main spindle speed | 6000r/min |
| drawing knife saw speed | 5600r/min |
| cut-off cutter speed | 5000r/min |
| FJ cutter outside Dia. | 160 mm |
| FJ cutter inside Dia. | 70 mm |
| working table process size | 600×1000mm |
| Main saw motor power | 11KW |
| saw motor power | 5.5KW |
| feeding motor power | 0.375KW |
| servo motor power | 1KW |
| air pressure request | 0.5~0.8Mpa |
| Net weight | 2000KG |
| overall dimension | 2380×1700×1400mm |
2.MXZ3515T-B finger joint shaper (with glue)
3. MF756A strap conveyor
4. MF756B strap conveyor
5. MF756L strap conveyor
6. MF746 Inventor square strap conveyor
7. MF746LC Inventor long strap conveyor
8. MF765 5meters strap conveyor
9.MHZ1562P Finger Joint assembler
| Max. working width | 600mm |
| Max. working high | 150mm |
| finger joint teeth length | 12mm |
| drawing knife saw speed | 6000r/min |
| drawing knife saw speed | 5600r/min |
| cut-off cutter speed | 5000r/min |
| finger joint cutter outside Dia. | 160 mm |
| finger joint cutter inside Dia. | 70 mm |
| working table process size | 600×00mm |
| Main saw motor power | 11KW |
| saw motor power | 5.5KW |
| feeding motor power | 0.375KW |
| servo motor power | 1KW |
| air pressure request | 0.5~0.8Mpa |
| Net Weight | 2200KG |
| overall dimension | 2580×1850×1400mm |
| working table length | 1320 mm |
| working table width | 600mm |
| motor power | 0.375KW |
| overall dimension | 1330×780×920mm |
| working table length | 1320 mm |
| working table width | 600mm |
| motor power | 0.375KW |
| overall dimension | 1330×780×920mm |
| working table length | 1850 mm |
| working table width | 610mm |
| motor power | 0.375KW |
| overall dimension | 1980×725×920mm |
| working table length | 1680 mm |
| working table width | 1100mm |
| motor power | 0.375KW |
| overall dimension | 1800×1250×920mm |
| working table length | 1200 mm |
| working table width | 610mm |
| motor power | 0.375KW |
| overall dimension | 1680×725×920mm |
| working table length | 5000 mm |
| working table width | 650mm |
| Reduce motor power | 1.5KW*2PCS |
| Max. processing wood width | 200mm |
| overall dimension | 5050×830×920mm |
| Max.press joint length | 6250mm |
| Max.working width | 150mm |
| Max. working thickness | 80mm |
| Min. working length | 100 mm |
| Min. working width | 30mm |
| Min. working thickness | 15mm |
| Saw motor speed | 3700r/min |
| saw outside Dia. | 355 mm |
| Saw motor power | 3kw |
| In-feed reducer motor power | 1.5KW*2Pcs |
| Oil pump motor power | 4kw |
| working air pressure | 0.5~0.8Mpa |
| Max. joint power | 7800 Kg |
| Max. output | 30m/min |
| Overall dimension | 7300×1600×1560mm |
MAYBE YOU ALSO NEED
