Audited Supplier
lntegrated filter cartridge dust collector EKM3000 is a series of dust collectors specially developed for welding, cutting, polishing and other smoke and dust characteristics.
It integrates the design of filtering units, fan motors, control systems, preprocessors, etc., and is equipped with different air volumes and quantities of filtering units to adapt to different on-site working conditions. The air inlet is equipped with a uniform flow ash blocking device, which has a more uniform wind speed, lower wind resistance, and prevents the filter cartridge from being damaged by large particle dust at high speeds.
It adopts a guide cone filter cartridge, which improves the ash cleaning effect by more than 30% compared to ordinary filter cartridges.
The unique quick installation method of the filter cartridge and the mechanical lifting device of the ash bucket are easy to maintain, and the PLC automatic control system is used.
The operation is simple and reliable, and the internal unique noise reduction treatment has extremely low operating noise.
Model | EKM-3000EX | EKM-6000EX |
Airflow | 3000m³/h | 6000m³/h |
Machine power | 3.0kW | 7.5kW |
filtration efficiency | 99.9% | 99.9% |
filter cartridge | φ324*610mm | φ324*610mm |
Cartridge number | 4 | 6 |
Ash bucket volume | 40L | 60L |
Noisc level db | ≤75dB( A) | ≤75dB(A) |
Air Compression | 0.5-0.6MPa | 0.5-0.6MPa |
Voltage/Phase/Hertz | 380V/3PH/50Hz | 380V/3PH/50Hz |
Inlet Size | φ300mm | φ300mm |
Overall dimensions | 11560*950*2870mm | 11560*950*2870mm |
weight | 733kg | 841kg |
Humidity/Temperature - sensor | YES | YES |
match | Inverter control | Inverter control |
This dust collector is suitable for welding dust plasma, laser cutting dust polishing dust new material processing dust Centralized governance
For dust removal conditions with potential spark hazards, spark capture devices can be installed at the front end to eliminate fire hazards.
For flammable and explosive dust removal conditions, explosion-proof integrated filter cartridge dust collectors can be selected.
For welding environments that require constant temperature and humidity, an integrated filter cartridge dust collector with temperature and humidity control unit can be selected
1.Integrated structure design, rigid style with excessive bevel Angle, beautiful appearance, small footprint and strong adaptability.
2.PTFE polyester coated imported filter cylinder, compared with the traditional fiber or microfiber coated filter material service life of 2 to 3 times longer, up to 3000 hours or more. The inner diversion cone device solves the problem of incomplete cleaning in the upper 1/3 range of the ordinary filter cartridge, and the cleaning effect is increased by more than 30%.
3.Unique rapid installation of the filter cylinder, just gently rotate the handle, the filter cylinder automatic separation, easy to achieve the replacement and maintenance of the filter cylinder, using the vertical installation structure, more thoroughly clean ash, longer service life.4.Filter cylinder equipped with differential pressure detection, according to the blockage of the filter cylinder, to achieve automatic cleaning treatment, can also be cleaned regularly.
5.External PLC automatic control system, simple operation, more unified with the whole equipment, and according to the requirements of the equipment field operation environment, the installation position of the electric control box is more flexible.
