XPE Foam Insulation Material/Thermal Insulation Foam Roll

Price $1.70 Compare
Min Order 100 Square Meters
Shipping From Henan, China
Popularity 436 people viewed
Quantity
+-
 

Henan Zhongzheng Trade Co., Ltd.

VIP   Audited Supplier 4 years
Profile Certified by SGS/BV
ZZHW001
Yes
Foil+Foam+Foil
Other Heat Insulation Materials
96-97%
0.032W/Mk
0.03-0.04 Coef
-50c to 80c
2.5mm-30mm
Metal & Steel Frame or House
Zzhme
Class a
0.07 G/Hr.M2
200-450°C
35~65kg/m³
Exterior Tiles, Interior Tiles
Silver
3 Year
45cm
Industrial
no
PE Bag
1.2*40m
China
76072000
Product Description
Product Description

Product Introduction:

This is a new environmentally-friendly heat insulation material, which is soft, light and easy to install. It is made from aluminum foil and polyethylene through special machinery . It has no odor and toxicity; It not only overcomes the discomfort and environmental damage brought by glass fiber and epispastic materials, but can also resist ultraviolet radiation that can penetrate through sheet iron, concrete, wood and other common heat insulation materials. This new heat insulation material not only has good insulation, heat-reflection & insulation and anti-radiation functions, but also has good moisture-barrier, heat-preservation and energy-saving functions in housing construction (roof, wall, and floor).
 
It is an economical solution for a wide range of industrial, manufacturing and consumer applications.

 

Main MaterialThermal Aluminum Foil EPE/XPE Foam Insulation
Material StructrueMPET+EPE/XPE
MPET+EPE/XPE+MPET
Al+EPE/XPE
Al+EPE/XPE+Al
Al+woven+EPE/XPE+Al
Al+woven+EPE/XPE+woven+Al
Al+woven+EPE/XPE+Anti-glare+Al
Al+EPE/XPE+Anti-glare+Al
Normal FoamThickness4mm 5mm 6mm 6.5mm 8mm,10mm,20mm or customzied
Coating ColorBlue, Green, Pink, Orange or customized
MPET/ Al Foil Thickness12micron/7 micron
Product Thickness2mm-10mm
Reflectivity96%~97%
Normal Roll size1.2m *30m/roll ; 1.2m *40m/roll; 1.35m *22.25m/roll;  can be customized
Packing1 roll/ clear plastic bag or customized logo printing packing bag accept

 

Product Type:
Product Features:

 

 

 

Installation Instructions

 

Installation methods and Installation Projects:
 

  • Measure the metal roof to determine the amount of bubble foil wrap insulation required for the project. Purchase approximately 10 to 15 percent more product than required to account for overlapping and to provide the proper air gap between the purlins -- the horizontal lengths of wood that support the roof panels between the rafters.
  • Cover the metal roof purlins with double-sided adhesive tape. Unroll the foil wrap insulation and attach it to the first purlin. Continue to unroll the foil insulation and attach it the remaining purlins, paying attention to allow the insulation to sag at least 1 inch between the horizontal members. The sagging provides an air gap that raises the insulation's efficiency.
  • Continue to attach the Aluminum foil bubble insulation to the metal roofing purloins, overlapping the adjoining sheets 2 inches as you go. This is a temporary hold to keep the bubble foil wrap in place while you prepare the next step.
  • Secure the bubble foil to the framing members with furring strips. Attach the furring strips perpendicular to the purloins every 24 inches to the framing members with 2-inch metal screws, paying attention to not disrupt the insulation's sagging. Use a drill equipped with a screwdriver bit to drive the screws into the framing members.
  • Cover the seams of the bubble insulation with foil tape.

 

Application:

Roof,Ceiling,Wall,Floor,Attic,Livestock Shelters,Basement,Factory buildings,Duct wrappings,Container liner,Sun-stop cover and vehicles.
 
1.      Thermal insulation and light inflecting in the constrction and protection for both cold winter and water piper 
2.      Separation of refrigerator,warm keeping for center air-conditioned,refrigerator and other home appliances
3.      Thermal insulation,sound absorption and noise reduction for car ,train, refrigerator car and laboratory, moisture proof cushion for traveling.

 
Packaging & Shipping

Company Profile

Certifications

FAQ

1.  Are you a manufacturer?

     Yes, we have our own factory, so we can offer a competitive factory price.

 

2. How can we get a sample to test quality before placing bulk order?
Very glad to tell you that we can supply free sample for quality testing.
Usually send out by DHL, FedEx, TNT or UPS. Only shipping cost charges.


3. Can we do printing or label stickers on the product?
Yes, we can offer logo print, pattern print, label stickers on product. 
Logo color can be made according to pantone color number if you need.

4. Can you produce customized product?
Yes, we can open customized mold according to your design.

5. What is the normal lead time?
For in stock products, we will send out in 1-3 days after receiving your payment.
For customized products, we will send out 3-20 days depending on the design.
Message Type
* Message Content
* Name  
* Phone
* Email
* CAPTCHA