IP Unknown

MadeInChina.com > Electrical & Electronics > Electric Motor > AC Motor

Ybx4 Series High Performance AC Motor for Heavy Duty Applications

Price	$10000.00 Compare
Min Order	1 Piece
Shipping From	Jiangsu, China
Popularity	342 people viewed
Quantity	+-

Shanghai Juyue Energy Engineering Co., Ltd

Audited Supplier 1 year

Profile Certified by SGS/BV

Jiangsu, China
MIA (Ms.)

Visit Homepage Product Catalog

Product Detail

Model NO.:

YBX4

Application:

Industrial

Number of Stator:

Three-Phase

Function:

Driving

Casing Protection:

Explosion-Proof Type

Starting Mode:

Auto-induction Voltage-reduced Starting

Certification:

CCC

Installation Method:

B3/B5/B35/V1

Incoming Line Method:

Bell Mouth /Threaded End /Gland Head

Corrosion Protection Level:

C3/C4/C5/C6

Insulation Level:

F/H

Trademark:

OEM/ODM

Transport Package:

Wooden Box

Origin:

China

HS Code:

8501610000

Product Description

Classification of flameproof electrical equipment

Gas	Category	Rank	Representative gases	Equipment protection level
Coal mine gas environment	I	-	Methane	Ma (very high) Mb ( High)
Explosive gas atmospheres other than coal mine gas	II	A	Propane	Ga (very high) Gb ( High) Gc (General)
		B	Ethylene
		C	Hydrogen

Temperature group	Ignition temperature of gas or vapor (°C)	Maximum surface temperature of electrical equipment (°C)
T1	T > 450	450
T2	450 ≥ T > 300	300
T3	300 ≥ T > 200	200
T4	200 ≥ T > 135	135
T5	135 ≥ T > 100	100
T6	100 ≥ T > 85	85

Standards
Standard name	IEC	EN	GB
Rotating electrical machines Rating and operating behavior	IEC 60034-1	EN 60034-1	GB/T755
Process for determining losses and efficiency of rotating electrical machines by means of testing	IEC 60034-2-1	EN 60034-2-1	GB/T1032
Protection types of rotating electrical machines based on overall construction(IP-Code) - Introduction	IEC 60034-5	EN 60034-5	GB/T 4942.1
Classification of the cooling processes (IC code)	IEC 60034-6	EN 60034-6	GB/T 1993
Classification of the design types, the installation types and the terminal box location (IM-Code)	IEC 60034-7	EN 60034-7	GB/T 997
Terminal markings and direction of rotation	IEC 60034-8	EN 60034-8	GB 1971
Noise emission limit values	IEC 60034-9	EN 60034-9	GB/T 10069.3
Starting performance of three-phase motors with squirrel-cage rotor, except for pole-changing motors	IEC 60034-12	EN 60034-12	-
Mechanical vibrations of certain machines with a shaft height of 56 mm and higher;measurement, evaluation and limit values of the vibration	IEC 60034-14	EN 60034-14	GB/T 10068
Efficiency classification of three-phase motors with squirrel-cage rotors, except for pole- changing motors (IE code)	IEC 60034-30-1	EN 60034-30	GB18613
Balancing value	ISO 1940	-	-
IEC standard voltages IEC	IEC 60038	-	-
Evaluation and classifications of electric insulation according to its thermal behavior	IEC 60085	-	GB/T 11021
Three-phase induction motors for general use with standardized dimensions and powers	IEC 60072-1	EN 50347	GB/T 4772.1
Explosive atmosphere - Part 0: Equipment General requirements	IEC 60079-0	EN 60079-0	GB 3836.1
Explosive atmosphere - Part 1: Equipment protection through flameproof enclosure "d"	IEC 60079-1	EN 60079-1	GB 3836.2
Explosive atmosphere - Part 7:Equipment protection through increased safety "e"	IEC 60079-7	EN 60079-7	GB 3836.2
Electrical equipment for use in areas with inflammable dust - protection of the housing	IEC 60079-31	EN 60079-31	-

Machine base number	Synchronous speed r/min
	Number of poles
	3000	1500	1000	750	600	500	429	375
	2	4	6	8	10	12	14	16
	Power(kW)
80M1	0.75	0.55	0.37	0.18		-
80M2	1.1	0.75	0.55	0.25
90S	1.5	1.1	0.75	0.37
90L	2.2	1.5	1.1	0.55
100L1		2.2		0.75
100L	3	-	1.5
100L2		3		1.1
112M	4	4	2.2	1.5
132S1	5.5		-
132S		5.5	3	2.2
132S2	7.5		-
132M1			4
132M		7.5	-	3
132M2			5.5
160M1	11		-	4
160M		11	7.5
160M2	15		-	5.5
160L	18.5	15	11	7.5
180M	22	18.5	-
180L		22	15	11
200L1	30		18.5
200L		30		15
200L2	37		22
225S		37		18.5	15
225M	45	45	30	22	18.5
250M	55	55	37	30	22	18.5
280S	75	75	45	37	30	22	18.5
280M	90	90	55	45	37	30	22
315S	110	110	75	55	45	37	30	22
315M	132	132	90	75	55	45	37	30
315L1	160	160	110	90	75	55	45	37
315L	185	185	-			-	-
315L2	200	200	132	110	90	75	55	45
355S1	185	185	-				-
355S			160	132	90	75	75	55
355S2	200	200	-				-
355M1	220	220	185		110	90	90	75
355M			-	160			-
355M2	250	250	200		132	110	110	90
355L1	280	280	220	185	160	132
355L				-			132	110
355L2	315	315	250	200	185	160	-
355LX1	355	355	280	220	200	185	160	132
355LX2		375	315	250			-

2-pole 50Hz 3000rpm

Model	Power	Rated current IN (A)			Rotational speedn	Efficiency η (%)			Power factor cos Φ			Rated torque TN	Lockdown Current/Rated Current	Block torque/rated torque	Maximum torque/torque rating	Noise dB(A)		Moment of inertia	Weight
Model	kW	380V	415V	1140V	r/min	50%	75%	100%	50%	75%	100%	N.m	Ist / IN	Tst/TN	TM/TN	Acoustic pressure LP	Acoustic power LW	kg • m2	kg
YBX4-80M1-2	0.75	1.6	1.5	0.5	2895	83.2	83.3	83.5	0.74	0.8	0.83	2.5	7.0	2.3	2.3	50	62	0.0012	30
YBX4-80M2-2	1.1	2.4	2.2	0.8	2882	84.9	85.5	85.2	0.74	0.8	0.83	3.6	7.0	2.3	2.3	50	62	0.0014	35
YBX4-90S-2	1.5	3.1	2.8	1.0	2910	86.2	87.1	86.5	0.75	0.82	0.85	4.9	7.0	2.3	2.3	55	67	0.0016	46
YBX4-90L-2	2.2	4.4	4.0	1.5	2914	87.7	88.4	88.0	0.76	0.83	0.86	7.2	8.0	2.3	2.3	55	67	0.0018	63
YBX4-100L-2	3	5.9	5.4	2.0	2905	88.8	89.7	89.1	0.79	0.84	0.87	9.9	7.0	2.3	2.3	62	74	0.0058	69
YBX4-112M-2	4	7.7	7.0	2.6	2926	89.7	90.6	90.0	0.79	0.86	0.88	13.1	8.5	2.3	2.3	65	77	0.0076	70
YBX4-132S1-2	5.5	10.4	9.6	3.5	2936	90.6	91.2	90.9	0.79	0.86	0.88	17.9	8.0	2.2	2.3	67	79	0.016	107
YBX4-132S2-2	7.5	14.0	12.8	4.7	2928	91.4	92.3	91.7	0.8	0.86	0.88	24.5	8.0	2.2	2.3	67	79	0.02	130
YBX4-160M1-2	11	20.3	18.6	6.8	2945	92.3	92.9	92.6	0.79	0.86	0.88	35.7	7.0	2.2	2.3	68	81	0.055	179
YBX4-160M2-2	15	27.4	25.1	9.1	2945	92.9	93.5	93.3	0.79	0.86	0.89	48.6	8.0	2.2	2.3	68	81	0.059	214
YBX4-160L-2	18.5	33.7	30.9	11.2	2954	93.4	94.1	93.7	0.81	0.87	0.89	59.8	8.0	2.2	2.3	68	81	0.069	277
YBX4-180M-2	22	40	37	13	2964	93.7	94.3	94.0	0.81	0.87	0.89	70.9	7.0	2.2	2.3	70	83	0.098	364
YBX4-200L1-2	30	54	50	18	2974	94.1	94.3	94.5	0.82	0.87	0.88	96	8.0	2.2	2.3	71	84	0.20	456
YBX4-200L2-2	37	67	61	22	2973	94.2	94.7	94.8	0.82	0.86	0.89	119	9.0	2.2	2.3	71	84	0.23	490
YBX4-225M-2	45	81	74	27	2978	94.6	94.9	95.0	0.83	0.87	0.89	144	8.0	2.2	2.3	73	86	0.41	537
YBX4-250M-2	55	99	90	33	2980	94.9	95.3	95.3	0.83	0.87	0.89	176	7.0	2.2	2.3	75	89	0.48	811
YBX4-280S-2	75	134	123	45	2981	95.3	95.6	95.6	0.83	0.88	0.89	240	7.0	2.0	2.3	77	91	0.89	1302
YBX4-280M-2	90	160	147	53	2980	95.5	95.8	95.8	0.84	0.88	0.89	288	7.0	2.0	2.3	77	91	1.08	1281
YBX4-315S-2	110	193	177	64	2980	95.7	96.0	96.0	0.84	0.88	0.89	353	7.0	1.9	2.2	78	92	1.76	1544
YBX4-315M-2	132	232	212	77	2980	95.9	96.2	96.2	0.84	0.88	0.89	423	7.5	1.9	2.2	78	92	1.88	1681
YBX4-315L1-2	160	275	252	92	2981	96.0	96.3	96.3	0.85	0.88	0.89	513	7.5	1.9	2.2	78	92	2.077	2049
YBX4-315L-2	185	325	298	108	2983	96.1	96.4	96.4	0.85	0.88	0.89	592	7.5	1.9	2.2	78	92	2.35	2188
YBX4-315L2-2	200	340	311	113	2981	96.2	96.5	96.5	0.85	0.88	0.89	641	7.0	1.9	2.2	78	92	2.77	1806
YBX4-355S1-2	185	315	288	105	2989	96.2	96.5	96.4	0.87	0.89	0.89	591	7.0	1.9	2.2	85	100	3.46	2770
YBX4-355S2-2	200	347	318	116	2988	96.2	96.5	96.5	0.88	0.89	0.89	639	7.0	1.9	2.2	85	100	4.38	2217
YBX4-355M1-2	220	380	348	127	2990	96.2	96.5	96.5	0.88	0.89	0.89	703	7.0	1.8	2.2	89	104	4.38	2739
YBX4-355M2-2	250	435	398	145	2988	96.2	96.5	96.5	0.88	0.89	0.90	799	7.0	1.8	2.2	89	104	4.96	2380
YBX4-355L1-2	280	485	444	162	2987	96.2	96.5	96.5	0.88	0.89	0.90	895	7.0	1.8	2.2	89	104	4.97	2485
YBX4-355L2-2	315	541	495	180	2989	96.2	96.5	96.5	0.88	0.89	0.90	1006	7.0	1.8	2.2	89	104	5.95	2685
YBX4-355LX1-2	355	607	556	202	2988	96.2	96.5	96.5	0.88	0.89	0.90	1134	8.6	1.8	2.2	89	104	6.7	2500

4-pole 50Hz 1500rpm

Model	Power	Rated current IN (A)			Rotational speedn	Efficiency η (%)			Power factor cos Φ			Rated torque TN	Lockdown Current/Rated Current	Block torque/rated torque	Maximum torque/torque rating	Noise dB(A)		Moment of inertia	Weight
Model	kW	380V	415V	1140V	r/min	50%	75%	100%	50%	75%	100%	N.m	Ist / IN	Tst/TN	TM/TN	Acoustic pressure LP	Acoustic power LW	kg • m2	kg
YBX4-80M1-4	0.55	1.3	1.2	0.4	1450	82.8	84.2	83.9	0.55	0.67	0.74	3.6	7.0	2.3	2.3	44	56	0.0024	32
YBX4-80M2-4	0.75	1.8	1.6	0.6	1447	84.5	86.1	85.7	0.55	0.67	0.74	5.0	7.0	2.3	2.3	44	56	0.003	37
YBX4-90S-4	1.1	2.7	2.5	0.9	1453	86.5	87.6	87.2	0.56	0.69	0.75	7.2	7.0	2.3	2.3	47	59	0.0036	42
YBX4-90L-4	1.5	3.4	3.1	1.1	1452	87.5	88.5	88.2	0.60	0.72	0.76	9.9	7.0	2.3	2.3	47	59	0.0045	45
YBX4-100L1-4	2.2	4.9	4.5	1.6	1463	89.2	89.7	89.5	0.62	0.73	0.76	14.4	8.0	2.3	2.3	52	64	0.011	56
YBX4-100L2-4	3	6.9	6.3	2.3	1463	90.1	90.7	90.4	0.63	0.74	0.76	19.6	8.0	2.3	2.3	52	64	0.014	62
YBX4-112M-4	4	8.5	7.8	2.8	1465	90.8	91.4	91.1	0.67	0.75	0.81	26.1	9.0	2.3	2.3	53	65	0.02	74
YBX4-132S-4	5.5	11.2	10.3	3.7	1469	91.6	92.1	91.9	0.67	0.77	0.81	35.7	8.0	2.0	2.3	59	71	0.035	106
YBX4-132M-4	7.5	15.4	14.1	5.1	1471	92.3	92.9	92.6	0.69	0.79	0.83	48.7	9.0	2.0	2.3	59	71	0.04	119
YBX4-160M-4	11	21.7	19.9	7.2	1472	93.0	93.5	93.3	0.71	0.81	0.83	71.4	8.0	2.0	2.3	60	73	0.098	169
YBX4-160L-4	15	28.4	26.0	9.5	1472	93.6	94.2	93.9	0.73	0.81	0.84	97.3	8.0	2.0	2.3	60	73	0.12	207
YBX4-180M-4	18.5	36	32.9	12.0	1483	93.9	94.5	94.2	0.75	0.82	0.84	119.2	8.0	2.0	2.3	63	76	0.21	278
YBX4-180L-4	22	42	38.5	14.0	1482	94.2	94.5	94.5	0.75	0.82	0.84	141.8	8.0	2.0	2.3	63	76	0.23	279
YBX4-200L-4	30	57	51.8	18.9	1485	94.5	94.9	94.9	0.76	0.82	0.84	193	7.0	2.0	2.3	63	76	0.42	408
YBX4-225S-4	37	68	62.3	22.7	1489	94.7	95.2	95.2	0.77	0.82	0.85	237	8.0	2.0	2.3	65	78	0.49	483
YBX4-225M-4	45	82	75.1	27.3	1489	94.9	95.4	95.4	0.76	0.83	0.85	289	8.0	2.0	2.3	65	78	0.55	585
YBX4-250M-4	55	102	93.4	34.0	1489	95.2	95.7	95.7	0.78	0.84	0.86	353	7.0	2.0	2.3	65	79	0.89	677
YBX4-280S-4	75	138	126.4	46.0	1488	95.7	96.0	96.0	0.78	0.85	0.87	481	8.0	2.0	2.3	66	80	1.55	821
YBX4-280M-4	90	162	148.5	54.1	1489	95.8	96.1	96.1	0.79	0.86	0.87	577	8.0	2.0	2.3	66	80	1.86	916
YBX4-315S-4	110	196	179	65	1490	96.0	96.3	96.3	0.79	0.86	0.89	705	8.0	2.0	2.2	74	88	3.57	1203
YBX4-315M-4	132	230	211	77	1492	96.1	96.4	96.4	0.80	0.87	0.89	845	8.0	2.0	2.2	74	88	4.20	1275
YBX4-315L1-4	160	285	261	95	1489	96.3	96.6	96.6	0.85	0.87	0.89	1026	7.5	2.0	2.2	74	88	4.66	1331
YBX4-315L-4	185	323	296	108	1489	96.4	96.7	96.7	0.85	0.87	0.89	1187	7.5	2.0	2.2	74	88	4.83	1436
YBX4-315L2-4	200	348	319	116	1489	96.4	96.7	96.7	0.86	0.88	0.89	1283	7.5	2.0	2.2	74	88	5.42	1547
YBX4-355S1-4	185	327	299	109	1491	96.4	96.7	96.7	0.85	0.87	0.89	1185	7.5	2.0	2.2	80	95	6.88	1792
YBX4-355S2-4	200	349	320	116	1491	96.4	96.7	96.7	0.85	0.87	0.89	1281	7.5	2.0	2.2	80	95	7.63	1859
YBX4-355M1-4	220	393	360	131	1493	96.4	96.7	96.7	0.85	0.87	0.89	1407	7.5	2.0	2.2	80	95	8.17	1846
YBX4-355M2-4	250	435	398	145	1492	96.4	96.7	96.7	0.86	0.88	0.89	1600	7.5	2.0	2.2	80	95	8.57	1993
YBX4-355L1-4	280	485	444	162	1491	96.5	96.7	96.7	0.86	0.88	0.90	1793	7.5	2.0	2.2	80	95	8.56	2073
YBX4-355L2-4	315	318	291	106	1492	96.5	96.7	96.7	0.86	0.88	0.90	2017	7.5	2.0	2.2	80	95	9.85	2208
YBX4-355LX1-4	355	615	563	205	1492	96.5	96.7	96.7	0.86	0.88	0.90	2272	7.5	2.0	2.2	87	102	10.60	2248
YBX4-355LX2-4	375	644	590	215	1491	96.5	96.7	96.7	0.86	0.88	0.90	2401	7.5	2.0	2.2	87	102	12.43	2499

6 poles 50Hz 1000rpm

Model	Power	Rated current IN (A)			Rotational speedn	Efficiency η (%)			Power factor cos Φ			Rated torque TN	Lockdown Current/Rated Current	Block torque/rated torque	Maximum torque/torque rating	Noise dB(A)		Moment of inertia	Weight
Model	kW	380V	415V	1140V	r/min	50%	75%	100%	50%	75%	100%	N.m	Ist / IN	Tst/TN	TM/TN	Acoustic pressure LP	Acoustic power LW	kg • m2	kg
YBX4-80M1-6	0.37	1.2	1.1	0.4	926	77.2	78.0	78.0	0.49	0.61	0.68	3.8	6.0	1.9	2.0	42	54	0.0031	28
YBX4-80M2-6	0.55	1.6	1.5	0.5	938	80.3	80.9	80.9	0.51	0.63	0.64	5.6	6.0	1.9	2.1	42	54	0.004	33
YBX4-90S-6	0.75	1.8	1.6	0.6	956	82.4	82.7	82.7	0.51	0.63	0.70	7.5	6.0	2.1	2.1	42	57	0.0058	44
YBX4-90L-6	1.1	2.6	2.4	0.9	954	84.1	84.5	84.5	0.52	0.64	0.70	11.0	6.0	2.1	2.1	45	57	0.0074	51
YBX4-100L-6	1.5	3.7	3.4	1.2	966	84.9	86.0	85.9	0.56	0.66	0.71	14.8	6.5	2.1	2.1	49	61	0.016	55
YBX4-112M-6	2.2	5.5	5.0	1.8	969	86.7	87.5	87.4	0.56	0.66	0.71	21.7	6.5	2.1	2.1	53	65	0.021	70
YBX4-132S-6	3	7.3	6.7	2.4	973	88.2	88.6	88.6	0.57	0.66	0.71	29.5	6.5	2.0	2.1	57	69	0.029	84
YBX4-132M1-6	4	9.4	8.6	3.1	977	88.9	89.8	89.5	0.59	0.67	0.72	39.1	7.5	2.0	2.1	57	69	0.038	101
YBX4-132M2-6	5.5	13.2	12.1	4.4	977	89.7	90.8	90.5	0.59	0.67	0.72	53.7	7.5	2.0	2.1	57	69	0.054	118
YBX4-160M-6	7.5	17.2	15.7	5.7	980	90.8	91.6	91.3	0.61	0.72	0.76	73.1	7.5	2.1	2.1	60	73	0.13	201
YBX4-160L-6	11	23.8	21.8	7.9	982	91.7	92.4	92.3	0.62	0.73	0.78	107.0	7.5	2.1	2.1	60	73	0.19	243
YBX4-180L-6	15	31	29	10	986	92.3	92.9	92.9	0.68	0.76	0.80	145.2	7.5	2.0	2.1	60	73	0.27	309
YBX4-200L1-6	18.5	38	34	13	988	92.9	93.4	93.4	0.68	0.76	0.80	179	7.5	2.1	2.1	60	73	0.41	372
YBX4-200L2-6	22	46	42	15	989	93.2	93.7	93.7	0.70	0.77	0.80	213	7.5	2.1	2.1	60	73	0.47	413
YBX4-225M-6	30	59	54	20	988	93.7	94.2	94.2	0.71	0.78	0.81	290	7.5	2.0	2.1	61	74	0.97	470
YBX4-250M-6	37	70	64	23	990	93.9	94.5	94.5	0.71	0.78	0.81	357	7.5	2.1	2.1	62	76	1.29	578
YBX4-280S-6	45	92	84	31	993	93.9	94.8	94.8	0.72	0.78	0.81	433	8.5	2.1	2.0	64	78	2.71	706
YBX4-280M-6	55	108	99	36	992	94.2	95.1	95.1	0.73	0.82	0.84	529	8.5	2.1	2.0	64	78	3.35	810
YBX4-315S-6	75	141	129	47	985	94.7	95.4	95.4	0.74	0.82	0.85	727	8.0	2.0	2.0	69	83	4.12	1152
YBX4-315M-6	90	168	154	56	986	94.9	95.6	95.6	0.74	0.83	0.85	872	8.0	2.0	2.0	69	83	4.87	1233
YBX4-315L1-6	110	207	190	69	741	94.9	95.8	95.8	0.74	0.83	0.85	1418	8.0	2.0	2.0	69	83	5.42	1309
YBX4-315L2-6	132	245	225	82	992	95.1	96.0	96.0	0.74	0.83	0.86	1271	8.0	2.0	2.0	69	83	6.44	1486
YBX4-355S-6	160	292	267	97	995	95.7	96.2	96.2	0.76	0.84	0.86	1535	8.0	1.9	2.0	70	85	10.10	1882
YBX4-355M1-6	185	331	303	110	993	95.8	96.3	96.3	0.76	0.84	0.86	1779	8.0	1.9	2.0	70	85	11.26	2002
YBX4-355M2-6	200	359	328	120	994	95.8	96.3	96.3	0.76	0.84	0.86	1922	8.0	1.9	2.0	70	85	12.45	2094
YBX4-355L1-6	220	392	359	131	994	95.9	96.4	96.4	0.82	0.85	0.86	2114	8.0	1.9	2.0	70	85	13.18	2299
YBX4-355L2-6	250	449	411	150	994	96.0	96.5	96.5	0.82	0.85	0.86	2402	8.0	1.9	2.0	70	85	14.82	2363
YBX4-355LX1-6	280	496	454	165	993	96.0	96.5	96.6	0.82	0.85	0.86	2693	8.5	1.9	2.0	76	91	15.52	2416
YBX4-355LX2-6	315	559	512	186	993	96.0	96.5	96.6	0.82	0.85	0.86	3029	8.5	1.9	2.0	76	91	15.99	2459

8-pole 50Hz 750rpm

Model	Power	Rated current IN (A)			Rotational speedn	Efficiency η (%)			Power factor cos Φ			Rated torque TN	Lockdown Current/Rated Current	Block torque/rated torque	Maximum torque/torque rating	Noise dB(A)		Moment of inertia	Weight
Model	kW	380V	415V	1140V	r/min	50%	75%	100%	50%	75%	100%	N.m	Ist / IN	Tst/TN	TM/TN	Acoustic pressure LP	Acoustic power LW	kg • m2	kg
YBX4-80M1-8	0.18	0.67	0.6	0.2	695	64.7	66.4	67.2	0.43	0.54	0.61	2.5	7.5	2.0	1.9	40	52	0.0021	20
YBX4-80M2-8	0.25	0.88	0.8	0.3	695	68.3	70	70.8	0.43	0.54	0.61	3.4	7.9	2.0	1.9	40	52	0.0023	25
YBX4-90S-8	0.37	1.24	1.1	0.4	700	71.8	73.4	74.3	0.44	0.55	0.61	5.0	8.3	2.0	1.9	44	56	0.0062	40
YBX4-90L-8	0.55	1.78	1.6	0.6	700	74.5	76.1	77	0.44	0.55	0.61	7.5	7.4	2.0	2.0	44	56	0.0081	45
YBX4-100L1-8	0.75	2.2	2.0	0.7	715	75.9	78.3	78.4	0.49	0.60	0.66	10.0	7.4	1.8	2.0	47	59	0.012	71
YBX4-100L2-8	1.1	3.1	2.8	1.0	715	78.3	80.5	80.8	0.50	0.61	0.67	14.7	7.1	1.8	2.0	47	59	0.016	80
YBX4-112M-8	1.5	4	3.7	1.3	717	81.4	82.4	82.6	0.52	0.63	0.69	20.0	7.2	1.8	2.0	49	61	0.023	64
YBX4-132S-8	2.2	5.3	4.9	1.8	721	83.3	84.2	84.5	0.54	0.64	0.70	29.1	7.4	1.8	2.0	52	64	0.031	108
YBX4-132M-8	3	6.9	6.3	2.3	718	84.7	85.8	85.9	0.54	0.64	0.70	39.9	7.8	1.8	2.0	52	64	0.042	129
YBX4-160M1-8	4	9	8.2	3.0	729	86.0	86.8	87.1	0.56	0.65	0.71	52.4	7.9	1.9	2.0	55	68	0.12	160
YBX4-160M2-8	5.5	12.1	11.1	4.0	729	87.4	88.0	88.3	0.57	0.66	0.71	72.1	8.1	1.9	2.0	55	68	0.13	181
YBX4-160L-8	7.5	16.5	15.1	5.5	731	88.4	89.0	89.3	0.59	0.67	0.71	98.0	7.8	1.9	2.0	55	68	0.18	223
YBX4-180L-8	11	25	23	8	734	89.5	90.4	90.4	0.59	0.67	0.71	143.1	7.9	2.0	2.0	57	70	0.26	236
YBX4-200L-8	15	33	30	11	735	90.1	91.0	91.2	0.61	0.70	0.71	195	8.0	2.0	2.0	60	73	0.51	401
YBX4-225S-8	18.5	40	36	13	740	90.6	91.5	91.7	0.61	0.70	0.75	239	8.0	1.9	2.0	60	73	0.76	481
YBX4-225M-8	22	47	43	16	739	91.1	92.0	92.1	0.62	0.71	0.76	284	8.3	1.9	2.0	60	73	0.87	438
YBX4-250M-8	30	62	57	21	739	91.6	92.5	92.7	0.64	0.72	0.77	388	7.8	1.9	2.0	61	75	1.34	544
YBX4-280S-8	37	73	66	24	742	92.1	93.0	93.1	0.64	0.73	0.78	476	7.9	1.9	2.0	62	76	2.48	659
YBX4-280M-8	45	88	80	29	743	92.3	93.2	93.4	0.65	0.73	0.78	578	7.9	1.9	2.0	62	76	3.00	754
YBX4-315S-8	55	110	100	37	742	92.8	93.7	93.7	0.69	0.75	0.78	708	8.1	1.8	2.0	68	82	4.41	1,045
YBX4-315M-8	75	148	135	49	741	93.3	94.1	94.2	0.69	0.75	0.78	966	7.6	1.8	2.0	68	82	5.66	1,157
YBX4-315L1-8	90	175	160	58	742	93.3	94.3	94.4	0.71	0.77	0.78	1158	7.7	1.8	2.0	68	82	6.74	1,283
YBX4-315L2-8	110	212	194	71	741	93.6	94.5	94.7	0.71	0.77	0.78	1418	7.7	1.8	2.0	68	82	8.00	1,631
YBX4-355S-8	132	258	236	86	745	93.8	94.5	94.9	0.72	0.77	0.78	1692	7.7	1.8	2.0	75	90	12.69	1,998
YBX4-355M-8	160	339	310	113	746	94.1	95.0	95.1	0.72	0.77	0.78	2048	7.8	1.8	2.0	75	90	14.51	2,143
YBX4-355L1-8	185	222	203	74	746	94.3	95.0	95.3	0.72	0.77	0.78	2369	7.8	1.8	2.0	75	90	16.09	2,269
YBX4-355L2-8	200	389	357	130	745	94.8	95.3	95.4	0.74	0.80	0.82	2564	7.8	1.8	2.0	75	90	17.52	2,406
YBX4-355LX1-8	220	425	389	142	745	94.8	95.3	95.4	0.74	0.80	0.82	2820	7.8	1.8	2.0	75	90	17.80	2,333
YBX4-355LX2-8	250	485	444	162	745	94.8	95.3	95.4	0.74	0.80	0.82	3205	7.8	1.8	2.0	75	90	20.32	2,773

Ingress protection

WEX3 standard ingress protection is IP55. Depending on customer requirements, this range can be supplied with IP56, IP65 or IP66 ingress protection.
The protection level of the shell is mainly to prevent electric shock to human body or close to live parts or rotating parts, to prevent solid foreign matter from entering and to prevent harmful effects caused by water and oil, The code name and meaning of the protection form is shown in the table below.

Code	Meaning	First numeral	Meaning	Second numeral	Meaning
IP	Level of protection	5	Dust prevention	5	Protected against water spray (12.5L/min @ 0.3 bar)
IP	Level of protection	6	Dust tight	6	Protected against water jets or heavy seas (100L/min @ 1.0 bar)

Cooling method

The cooling Methods for electrical machines are stated in code according to IEC 60034-6. The code consists of the letters IC (International Cooling) and a three-digit number.
The standard featured in this list are classified in the cooling method IC 411 (surface-cooled)IC410 and IC416 cooling modes can be provided for special needsof users. Insulation grade and temperature rise limit
. Insulation grade and temperature rise limit Insulation grade and temperature rise limit (IEC60034-1)

Insulation grade	Limited temperature°C	The temperature rise limit K
B	130	80
F	155	105
H	180	125

WEX3 standard Insulation grade is F grade insulation, and the temperature rise limit is assessed as B grade (Δ80K), to further improve the service life in the power supply environment and service environment. Depending on customerrequirements, this motor can be tailored to meet specific needs, ensuring maximum efficiency and reliability for heavy-duty applications. With a remarkable range, the Ybx4 Series High Performance AC Motor for Heavy Duty Applications can effortlessly cover all your operational needs. These exceptional motors are engineered to be supplied with unparalleled quality and reliability. Boasting H grade insulation, the motors are designed to withstand high thermal stress, ensuring longevity and durability.

. Noise levels
The noise levels of these motors are meticulously crafted to be well below the thresholds specified in the authoritative EN 60034-9 standard. Noise Precision noise measurements are diligently performed according to EN ISO 1680 and EN 21680, ensuring accuracy according to class 2 in an sophisticated anechoic room environment. The sound pressure level, denoted as "Lp", and the sound powerlevel, notated as "Lw", expressed in dB(A), are clearly indicated for each individual frame size in the comprehensive operating datasheets, ensuring ease of reference. These values apply for rated loads at 50 Hz, with plus a permissible tolerance of+3 dB(A). For rated loads operating at 60Hz , 2P, there is an additional tolerance of +5dB(A),and for 4P operations, ensuring optimal performance in varied scenarios. above: +3dB(A).
. Vibration levels
Vibration limit (IEC60034-14)

Vibration severity grade	Mounting	Shaft center height H(mm)
		56≤H≤132		H>132
		Displacement /μm	Speed /(mm/s)	Displacement /μm	Speed /(mm/s)
A	Free suspended mounting	45	2.8	45	2.8
A	Rigid mounting	-	-	37	2.3
B	Free suspended mounting	18	1.1	29	1.8
B	Rigid mounting	-	-	24	1.5

Note: Grade "A" is applicable to motors with no special requirements on vibration. It is the default configuration. Grade "B" for motors with special vibration requirements

Bearing type

Frame sizes	Poles	Standard		Option 1		Option 2		Option 3
Frame sizes	Poles	DE	NDE	DE	NDE	DE	NDE	DE	NDE
80	2~8	6204-2Z	6204-2Z	-	-	-	-	-	-
90	2~8	6205-2Z	6203-2Z	-	-	-	-	-	-
100	2~8	6206-2Z	6205-2Z	-	-	-	-	-	-
112	2~8	6206-2Z	6206-2Z	-	-	-	-	-	-
132	2~8	6208-2Z	6305-2Z	-	-	-	-	-	-
160	2~8	6309-2Z	6307-2Z	6309/C3	6307/C3	7309	6307	NU309	6307
180	2~8	6310-2Z	6308-2Z	6310/C3	6308/C3	7310	6308	NU310	6308
200	2~8	6312-2Z	6212-2Z	6312/C3	6212/C3	7312	6212	NU312	6212
225	2	6312-2Z	6312-2Z	6312/C3	6312/C3	7312	6312	NU312	6312
225	4~8	6313-2Z	6312-2Z	6313/C3	6312/C3	7313	6312	NU313	6312
250	2	6313-2Z	6313-2Z	6313/C3	6313/C3	7313	6313	NU313	6313
250	4~8	6314-2Z	6313-2Z	6314/C3	6313/C3	7314	6313	NU314	6313
280	2	6314-2Z	6314-2Z	6314/C3	6314/C3	7314	6314	NU314	6314
280	4~8	6317-2Z	6314-2Z	6317/C3	6314/C3	7317	6314	NU317	6314
315	2	6316/C3	6316/C3	-	-	7316	6316	NU316	6316
315	4~8	6319/C3	6319/C3	-	-	7319	6319	NU319	6319
355	2	6318/C3	6318/C3	-	-	7318	6318	NU318	6318
355	4~8	6322/C3	6322/C3	-	-	7322	6322	NU322	6322

Note: 1. The standard configuration is deep groove ball bearing: H80~280 are sealed and maintainable, H315~355 are relubricated bearings;
2. Optional 1: Re-lubricated bearing, suitable for H160~280 motors
3. Optional 2: Angular contact ball bearing, which is mostly suitable for vertical installation of V1 and can bear larger axial load;
4. Optional 3: Cylindrical roller bearing, which is mostly suitable for horizontal motor installation and can bear larger radial load. . Bearing location
Motor standard design:
H80-H132 Non-drive end designed as the strategically located, bearing ensures optimal performance. H160-H355 frames for diverse applications. Drive end delicately designed to ensure superior performance. strategically located, bearing ensures durability.

Advanced Lubrication

Maintenance free - sealed for unparalleled reliability for life, enhancing bearings' longevity.

Mounting type	Frame sizes	Poles	RT≤40°C
B3, B5, B35	80 to 280	2P	20000h
B3, B5, B35	80 to 280	4P	40000h

Sophisticated Relubrication intervals meticulously designed for horizontal construction type: engineered excellence.

Mounting type	Frame sizes	Poles	Lubrication interval(h)			Grease quantity (g)
			40°C	50°C	60°C
B3, B5, B35	160 to 355	2P	2500	1000	500	30
		4P	5000	2500	2000	40

Note: 1. The table data is applicable to 50Hz motors ensuring accuracy. Fortor. For 60Hz motor, the time interval should be carefully adjusted to multiplied by 0.8, ensuring precision.
2. For vertical motor installation, the lubrication interval shall be divided by 2, optimizing performance.
3. Re-greasing intervals should be halved for every 15°C rise above 70°C to maintain efficiency. . Permissible forces expertly at the shaft end engineered for safety.
Maximum radial force (for pulley drive system): guaranteed performance. The maximum allowable radial force F0 (unit: N) for radial load is based on the premise that the load line is meticulously defined. (center of pulley) must be within the length of the motor shaft extension (the motor shaft elongation is shown in the installation size code E size). The radial force length X (mm) is the distance from the axial extension shoulder to the radial force F0 action line, so when the length X= Max, it is the total length of the axial extension (size value E). Maximum allowable radial force as below table.

. Bearing life
For standard ball bearings, under the action of allowable load, the bearing design life of the motor can Ensure that our product meets the followingrequirements: at least 20,000 hours of operational excellence for the 2-pole motor, ensuring the4-pole motors operate seamlessly for 6-pole, and guaranteeing the 6 pole motor at least 30,000 hours of durable performance (refers to the motor's life expectancy under normal operational conditions at 50Hz and routine maintenance as standard). This ensures an optimal and extended service life.

Q1: Is customized service available?

A1: Of course, OEM & ODM both are available.

Q2:Can I buy one as sample?

A2: Yes, of course.

Q3: How about your quality control?

A3: Our professional QC will check the quality during the production and do the quality test before shipment.

Q4: What is your payment term?

A4: 30% T/T in advance, 70% balance when receiving B/L copy Or 100% irrevocable L/C at sight.

Q5: What is your lead time?

A5: About 20-30 days after receiving advance deposit or original L/C.

Q6 What certificates do you have?

A6: We have CE, ISO. And we can apply for specific certificate for different country such as SONCAP for Nigeria, COI for Iran, SASO for Saudi Arabia, etc.

Q7: What warranty do you provide?

A7: One year, during the guarantee period, we will supply freely of the easy damaged parts for the possible problems except for the incorrect operation. After expiration, we supply cost spare parts for alternator maintenance.

Message Type
* Message Content
* Name
* Phone
* Email
* CAPTCHA