Audited Supplier
MGS-H16
Magnetic Sensors
0-3m
0.1
0.1%
Liquid Level Transmitter
All in One
1 Year
CE
SS304
-20℃~80℃
Unmanned
Positive Operation
Pull-Type
Center
Single Post
CE, ISO, CCC
Combination
DC 24V
Magnetic Guidance Sensor for Agv
Agv
yuanben
Standard Export Package
CCC
Shanghai
9033000000
Product Description
MGS-H16 Magnetic Guidance Sensor for AGV appliance
1. Description
The Magnetic guiding sensor MGS-H16 developed by Yuanben, has a special made magnetic position sensor used to find small magnetic field (a magneic path is installed in the floor), and to keep the AGV heading direction continuously under control. The magnetic guidance sensors give signal about the AGV position deviations as the AGV passed the magnetic path, provides an output 16 BIT switches signal, turn at its magnetic path centre axis.
The sensor can guide vehicles with the help of small magnetic field installed along the magnetic guide path, in the floor. the AGV magnetic guide path is normally 50mm width and 1.0~1.5 thickness, the cost to install such guide path is a fraction of the cost of other type guide wire installation.
Magnetic guidance path can easily be installed in wood floors and other types of environment not well suited for guide wire installation.
2. Advantage
The MGS-H16 Magnetic guidance sensor has high accuracy by use of high quality components. A low cost is achieved by using a combination of standard components together with our standard control board. The system is easy to install and compact.
The magnetic guidance path in the floor may collect small magnetic particles and ferrous in the environment, this will however not cause any big problem under normal conditions.
3. Feature
Magnetic Tape Guidance AGV's route can be constructed in various locations, since the magnetic tape route can be constructed where the floor can not be carved. Modification of a magnetic tape route can be done easily and the route is durable against dust, water and light. MGS-H16 Magnetic Guide sensor detects the slight magnetic flux from a magnetic guide tape at operation distance 30mm (30mm to 40mm) and generates multiple switching signals, IP-65 housing is optionally available
4. Specification
5. Drawing
6. Photos
1. Description
The Magnetic guiding sensor MGS-H16 developed by Yuanben, has a special made magnetic position sensor used to find small magnetic field (a magneic path is installed in the floor), and to keep the AGV heading direction continuously under control. The magnetic guidance sensors give signal about the AGV position deviations as the AGV passed the magnetic path, provides an output 16 BIT switches signal, turn at its magnetic path centre axis.
The sensor can guide vehicles with the help of small magnetic field installed along the magnetic guide path, in the floor. the AGV magnetic guide path is normally 50mm width and 1.0~1.5 thickness, the cost to install such guide path is a fraction of the cost of other type guide wire installation.
Magnetic guidance path can easily be installed in wood floors and other types of environment not well suited for guide wire installation.
2. Advantage
The MGS-H16 Magnetic guidance sensor has high accuracy by use of high quality components. A low cost is achieved by using a combination of standard components together with our standard control board. The system is easy to install and compact.
The magnetic guidance path in the floor may collect small magnetic particles and ferrous in the environment, this will however not cause any big problem under normal conditions.
3. Feature
Magnetic Tape Guidance AGV's route can be constructed in various locations, since the magnetic tape route can be constructed where the floor can not be carved. Modification of a magnetic tape route can be done easily and the route is durable against dust, water and light. MGS-H16 Magnetic Guide sensor detects the slight magnetic flux from a magnetic guide tape at operation distance 30mm (30mm to 40mm) and generates multiple switching signals, IP-65 housing is optionally available
4. Specification
| Product Model | MGS-H-S-20-C20 |
| Product Number | MGS-H16 |
| Material Of Housing | PBT or Aluminum Case |
| Supply voltage | +24 VDC ±5%, ripple (p-p) 1% max. |
| Power consumption | 35mA max. (at DC+24V) |
| 70mA max. (at DC+12V) | |
| 75mA max. (at DC+5V) | |
| Digital type Output | NPN Transistor Open Collector Normally open Applicable voltage 30V max. Sink current 100mA max. |
| Operation Temperature | -10ºC to +50ºC (Non-freezing) |
| Operation Humidity | 35 to 95%RH (Non-condensing) |
| Prevent Class | IP65 |
| Storage Temperature | from -30 to +80ºC |
| Storage Humidity | from 35% to 95%RH (no condensation) |
| Target | MGT-50 -25 series magnetic guide tape |
| Operation Air Gap | 30 to 40mm (standard MGT-50-25) |
| Sensitivity | N-pole;6mT and over/ S-pole; 6mT and over |
| Element | 16 bits |
| Pitch | 10mm at even intervals |
| Logic | Normally open |
| Circuit | NPN open collector (DC30V, 50mA max.) |
| Residual voltage | 2V max. (at 50mA) |
| Response | 1ms |
| Insulation Resistance | 50MOhm |
| Connector | MIL-C-83503, 20Pin |
| Prevent circuit | Over-voltage and short circuit and reverse polarity protection |
| Mounting | Both Centre axis line of magnetic tape and sensor is Coincide |
| Appliance | AGV |
6. Photos
