Audited Supplier
Royal Wall Fountain
At 35-inches tall, the Royal wall fountain is sure to bring a sense of regality to your outdoor space. Coming in a sandstone finish, this fountain features a lion head at the center. The lion head pours water from its mouth into a bowl just below it, where the water then flows over the sides of the bowl at three different points. A large detailed basin catches the water finally, bringing the classic design of the fountain to a finish. A light sits in the bottom of the fountain, casting a warm glow on the bottom of the bowl.
This water fountain would be right at home on an outdoor wall, drawing attention to a corner of your garden that's taken inspiration from the English gardens found at Buckingham Palace. With its classic design and light color, this fountain will fit right in among your wisteria and hollyhocks. Delivering the ambient sound of running water, the Royal wall fountain will serve as a focal point in your garden, sure to garner compliments and finish out your outdoor space!
Features:
- CLASSIC LIONHEAD ACCENT: This indoor-outdoor wall fountain features traditional design elements perfect for your classic outdoor living room. A light sandstone finish complements the ornate detailing and lion head accent on this wall fountain, perfect for adding a touch of old world design into your sunroom, porch, patio, or deck.
- DIMENSIONS: 35 Inch Height, 16.3125 Inch Width, 10 inch Ext
- DYNAMIC LED LIGHTING: The LED lighting in the basin creates a soft, ambient lit-from-within effect with the water for a soothing glow. The light is operated independently from the pump so you can choose to use your fountain with or without the light.
- THERMAL SENSITIVE PUMPS: Our dynamic thermal-sensitive pumps automatically shut off when the water level is too low to cool the pump, saving energy and preventing pump damage over time
- Scratch Resistant Resin: Sandstone finished resin matches the textured surface paint and helps to resist fading and potential chipping over time; lightweight materials allow you to easily move the fountain even after assembly
| Fountain Design | Classic |
| Material | Resin |
| Water Capacity | 0.54 Gallons |
| Pump Included | Yes |
| Electric | Yes |
| Lighted | Yes |
| Hande Crafted | Yes |
| Location | Outdoor |
| Bulb Included | Yes |
| Voltage | 110V-240V |
| Flow Rate | 105 gallons per minute |
| Assembly Required | Yes |
| Suggested Number of People for Assembly / Installation | 2 |
| Additional Tools Required (Not Included) | Tool Free Assembly |
Before Assembly
- Carefully unpack your Water Fountain on to a smooth, flat surface to avoid damage
- Be sure to check for all listed parts as some may be hidden within the inner packaging
- Please read all instructions ad pump operation guidance carefully
- Follow the safety advice provided before attempting to assemble your Water Fountain
- Please retrain all documentation and your proof of purchase for future reference
If you find your Water Fountain isn't running or operation in the way you would expect, please read our Trouble Shooting guide first and check against the common factors listed before contacting the Services team
Care Guidance:
- Operate in fresh(tap) water only and check routinely to see if this needs topping up
- Periodically change the water to keep the flow, the water fountain itself and pump clean
- Remove scale and build-up regularly. We recommend purchasing Drift & Flow Algae Stop as a preventative treatment, which can be obtained through all good Garden Centre Retailers.
- DO NOT use any harmful additives such as bleach or chlorine. Only use a specific Water Fountain treatment as indicated above.
- DO NOT use anything abrasive to scrub the Water Fountain
- DO NOT use a pressure washer
- Always shut off the power supply before cleaning ad maintaining your Water Fountain
- Always switch off your Water Fountain before leaving home for sustained periods of time
Winter Care
During colder months and in particular freezing conditions, we recommend draining the Water Fountain, disconnecting the pump and shoring this indoors if possible. Allowing ice to build up in your Water Fountain, or subjecting it to changing temperatures can cause a number of issues, such as cracking, paint finish damage, pump and light failure, etc.
Before storing your Water Fountain, remove the pump and transformer than clean any lime or debris. Dry the surface gently with a clean and ensure his is packed away safety, away from anything that could cause damage
Protective Water Fountain Covers are available in the Drift & Flow range. As a precautionary measure in colder/wetter periods or when not in use, covering the product is recommended. Please note: Using a cover does not guarantee complete Winter protection.
