Audited Supplier
Jaguar screw air compressor chooses Jaguar new generation of micro-oil lubricating screw air compressor technology, with the advantages of reliable running performance, less wearing parts, low vibration, low noise and high efficiency while under high running efficiency. In the meanwhile the Jaguar intelligent control system helps to save more electricity and cost.
Power: 45KW~250KW
rotary screw air compressor
PM VSD screw air compressor
screw air compressor
air compressor
Compressor
Advantages of direct drive screw type series
The screw host is designed with the third generation of JAGUAR screw model line. According to the idea of large rotor, large bearing and low speed, all models are designed with a pair of continuous connection. Low speed reduces the failure rate and ensures a long service life of the host.
The direct transmission mode is adopted, with high transmission efficiency, reliable imported couplings, easy installation, even stress on the elastomer, and long service life.
Product details
1.JAGUAR High precision air-end
Due to the development of JAGUAR profiles and strengthening of steel bearings, our products have been repeatedly tested many times to provide customers with large discharge and the machine's life is greatly increased.
We will configure the pressure valve based on customers' demands and ensure that there's no problem in the use process, according to the real pressure needs of customers to satisfy customers.
Using unique design for our large aperture is able to reduce pressure abrasion, thus machine can be used for a long time.
We use imported material filters to effectively filter 99% of impurities, simultaneously reduce the use cost for customers.
Why the JAGUAR compressor can generate few vibration, because the air-end and asynchronous motor use special gaskets, which can effectively reduce transmission vibration.
IP54 wind cooling system has substantially reduced the electric current, in addition to stabilizing the electric motor's temperature.
Coaxial transmission
1.The coaxial transmission reduces transmission loss, prolongs motor service life, increases transmission efficiency and reduces footprint.
2.Variable frequency controller: variable frequency is adopted to provide stable pressure and gas consumption state suitable for customers. Professional heat dissipation design can operate at 50 ºC ambient temperature, automatically adjust the output rating under temperature rise conditions, and maintain the continuous and efficient operation of the inverter.
| Model | Mpa | Exhaust volume/exhaust pressure | Power | Noise | Exhaust port pipe diameter | Weight | Size |
| m³/min | kw/HP | dB(A) | inch | KG | (*W*Hmm) | ||
| ZLS60 | 0.7 | 8 | 45/60 | 73 | 1-1/2'' | 920 | 1550*1050*1460 |
| 0.8 | 7.5 | ||||||
| 1 | 7 | ||||||
| 1.25 | 5.8 | ||||||
| ZLS75 | 0.7 | 10.5 | 55/75 | 73 | 2'' | 1160 | 1600*1150*1580 |
| 0.8 | 9.8 | ||||||
| 1 | 8.6 | ||||||
| 1.25 | 7.8 | ||||||
| ZLS100 | 0.7 | 13.9 | 75/100 | 75 | 2'' | 1550 | 1910*1150*1580 1700*1200*1580 |
| 0.8 | 12.8 | ||||||
| 1 | 11.8 | ||||||
| 1.25 | 10.5 | ||||||
| ZLS125 | 0.7 | 16 | 90/125 | 75 | 2'' | 1850 | 2150*1350*1700 |
| 0.8 | 15.5 | ||||||
| 1 | 13.9 | ||||||
| 1.25 | 12.3 | ||||||
| ZLS150 | 0.7 | 20.5 | 110/150 | 77 | DN65 | 2450 | 2500*1650*1920 |
| 0.8 | 19 | ||||||
| 1 | 17.4 | ||||||
| 1.25 | 16.3 | ||||||
| ZLS175 | 0.7 | 24.1 | 132/175 | 77 | 3'' | 2700 | 3000*1800*2050 |
| 0.8 | 22.9 | ||||||
| 1 | 20.1 | ||||||
| 1.25 | 18.7 | ||||||
| ZLS200 | 0.7 | 28.3 | 160/200 | 79 | DN80 | 2890 | 3000*1800*2050 |
| 0.8 | 27 | ||||||
| 1 | 24.3 | ||||||
| 1.25 | 21.2 | ||||||
| ZLS250 | 0.7 | 32.5 | 185/250 | 79 | DN100 | 3000 | 3000*2000*2050 |
| 0.8 | 30 | ||||||
| 1 | 26.7 | ||||||
| 1.25 | 24.2 | ||||||
| ZLS300 | 0.7 | 38.5 | 220/300 | 79 | DN100 | 4400 | 3950*2300*2200 |
| 0.8 | 35.8 | ||||||
| 1 | 29.8 | ||||||
| 1.25 | 27.6 | ||||||
| ZLS350 | 0.7 | 43.8 | 250/350 | 80 | 4'' | 4610 | 3950*2300*2200 |
| 0.8 | 41.4 | ||||||
| 1 | 35.5 | ||||||
| 1.25 | 33.2 | ||||||
| ZLS400 | 0.7 | 52 | 300/400 | 80 | 5'' | 6000 | 4000*2300*2200 |
| 0.8 | 48 | ||||||
| 1 | 40.8 | ||||||
| 1.25 | 38.2 |
Configurattion diagram
Manufacturing technique
1.High Precision CBN Grinding Machine
2.Imported DMG MORI CNC Horizontal machining Center
3.Imported German Zeiss CMM Measuring Center
4.Imported Italian Salvagnini Dynamic Laser Cutting Machine
High Precision Equipment for manufacturing High Precision Screw Rotors EAMI uses professional high-precision manufacturing equipment, to ensure high standard design requirements, The screw screw rotor is grinded with high precision, and the machining precision reaches 0.005mm. The surface roughness reaches Ra0.1-0.2um.
Application
