Audited Supplier
- Technology data:
| Max load size(mm) | 1200 (L)×1200(W)×1600(H)mm |
| Packing efficiency | 20-40 loads / hour |
| Rotary arm speed | 3-15rpm |
| Height of turntable | 500mm±100mm |
| Power supply | 380V 60HZ 3Phase |
| Max load capacity | 2000kgs |
| Wrapping requirement | Bottom wrapping up to 2/3 of pallet, top wrapping 15cm higher than the height of pallet |
| Working ambiance | Indoor, normal temperature |
| Turntable | Diameter: 2000mm |
| Mast height | According to the pallet and turntable height |
2 Supply Scope
2.1 rotating turntable 1set
Galvanized roller diameter: 2000mm
Roller dia.: 76mm
Distance between rollers: 119mm
Slew bearing driven, motor: SEW
2.2 mast with film carriage 1 set
Film carriage lifting driving: chain driving, good stability and high reliability
Driving reducer: worm gear reducer
Open-door type film carriage
Motor brand: Chinese brand; power: 0.37kw
2.3 Film feeding & cutting device 1set
When stretch wrapping finish, the film will be cut and clamped automatically.
When the film tail is released from the clamp, the air shooter will blow the film tail up, then the film tail will be wrapped by stretch film and keep it tightly with the pallet to ensure no film tail produced.
Film hot melt cutting adopts electrical heating wire to cut the film.
After film being cut, the brush go onto the film tail to make it smooth.
2.4 control system 1set
PLC control system
Cut film automatically after wrapping finished
Film tension control adjustable
Carriage up/down speed adjustable
Safety tower light alarm
2.5 Top sheet dispenser
Top sheet length: adjustable according to the pallet (normally 1165mm+2*300mm)
Sheet delivery speed: 9.5m/min
Lifting speed: 4.5m/min
Sheet cutting: knife blade, pneumatic driven
2017.3 Shandong Sinolion Machienry Corp. Ltd start expanding the new plant.
2015.9 Shandong Sinolion Machinery Corp. Ltd was officially listed in the stock transfer system, stock code: 833475.
2015.4 Shandong Sinolion Machinery Co., Ltd. officially changed its name to "Shandong Sinolion Machinery Corp. Ltd".
2014.12 "Sinolion Machienry and Sinolion", the trademark was identified as Shandong famous brand.
2013.12 "Sinolion Machienry and Sinolion" were appraised as Jinan famous brand.
2010.8 Moved to the high-tech zones in No. 2010 Kehang Road, High-tech Zone, Jinan City, Shandong.
2007 Land compensation in the development zone Suncun, plan and construct new production plant. And It had constructed in September, 2009.
2006.8 Shandong Sinolion Machinery Corp. Ltd has been formally established.
