Four-station hinge life testing machine

Product features:
1. The overall size of the equipment is ~1300X1214X2350mm (the minimum occupied space after opening the door is ~3600X3200mm)
2. Voltage AC220v frequency adjustable (1-30 times/min)
3. Can clip four hinged test doors at the same time. Two of the test doors according to the requirements of European standard EN1935 door ruler made of ~2000X1000X50mm (base weight 40KG, can be added weight 480KG), the other two test doors according to ANS/BHMAA156, 1 of the requirements of making the door ruler is ~2134X914X50mm (base weight 57KG, can add weights to 148KG) to provide a total weight of 440+91KG (20KG of 22, 10KG of 8, 5KG of 1, 1KG of 6, using dumbbell counterweight blocks as standard weights).
4. The body of the frame adopts detachable mechanism, the four main columns of the body adopt 100X100 square tubes, and the frame of the door adopts 50X50 square tubes.
5. Open Angle between 0 and 90 degrees, easy to adjust.
6. American standard doors are fitted with mounting bars to mount the three hinges (made to standard dimensions) and a set of hinge mounting clamps are provided for each door.
7. A hinge is installed on the door of European standard, where the bearing with adjustable core is used as support. A set of hinge clamps is provided for each door.
8, the driving force of the door pressing the cylinder as the driving force of the door (open the door Angle and open the door speed are adjustable)
9. There is a protective device to prevent the simulated door from falling with failure stop and complete hinge break.
10, independent control cabinet, main controller using Delta PLC, Weilon man-machine.
11. Surface treatment for baking paint, fixture plating.

Product parameter table: