Introduction of TCP microporous aerator
The TCP type microporous aeration uses ABS engineering plastic as aeration chassis, titanium plate and ceramic plate as aeration plate, which is widely used in the biochemical treatment of municipal sewage and industrial wastewater.

Advantage
(1)The equipment is easy to install and maintain.
(2)The transfer speed of uniform oxygen is fast and the treatment effect is good.
(3)Anti-aging, high temperature, corrosion and long service life.
(4)High oxygen absorption rate and power efficiency.
(5) no blockage phenomenon.

The diameter of this product is 200mm, the aeration rate is 1~3m³/ pc, and the service area is 0.3~0.5m²/ pc.

Introduction of KBP variable hole microhole aerator
This product is mainly composed of polymer variable hole film air plate, ABS support tray and waterproof valve. In the oxygenation process, the product has small resistance, fine and uniform bubbles, no plugging after aeration stops, and high oxygen utilization rate.

Technical parameters
The company mainly has two kinds of rubber and ABS materials. The diameter is φ215, the inlet pipe diameter is 20, the service area is 0.4~0.8m²/ pc.

 

Introduction of WMP microporous aerator
The product is composed of body, screw cover, mesh film, distributor and sealing ring. The main body is formed by engineering plastic, and the mesh film is specially made of polyester fiber. The materials used meet the requirements of corrosion resistance and light weight. The structure is simple, easy to install, easy to replace, less accessories, is a reasonable structure, beautiful appearance, moderate price of new products.

Technical parameters

Model	215mm	260mm	300mm
Ventilation	1.5~3m3/h·pc	2~5m3/h·pc	3~7m3/h·pc
Bubble diameter	<1mm	<1mm	<1mm
Service area	0.3~0.5m3/pc	0.33~0.6m3/pc	0.5~0.8m3/pc
Oxygen utilization rate	30%	30%	30%
Oxygenation capacity	0.13~0.4kgO2/h	0.18~0.4kgO2/h	0.18~0.4kgO2/h
Submerged depth	Below 8m	Below 8m	Below 8m
Gas supply (water depth 4m)	2m3/h	3m3/h	3m3/h

Introduction of SLP type loose flow aerator
The diffuser aerator is composed of a zigzag air head, a diffuser cover, a deflector cover, a baffle and a central pipe.

Technical parameters
Material:ABS;
Diameter:400~600mm;
Inlet pipe diameter:DN25/DN32/DN40/DN50;
Service area:1~3m³/pc.

Yangzhou Deyuan Environmental Engineering Co., Ltd. is located in the beautiful suburbs of Yangzhou,Jiangsu Province, China. It is a a comprehensive enterprise specializing in the manufacturing, construction, and installation services of environmental protection equipment. The company is located in Yangzhou City, Jiangsu Province, China. It covers an area of 15000 square meters, with various factory buildings covering 12000 square meters. It's main products include waste gas treatment equipment, sewage treatment equipment, sludge treatment equipment, water supply equipment, pure and ultra pure water manufacturing equipment, heat exchange equipment.