Audited Supplier
150*6000
Fms
Synthetic Fiber
Fms
Pressure Differential
Bag Filter
Dust Filter, Air Filter, Steel Mill
Medium Filter
Round Bag
High-Temperature
Vertical Lifting
Steel Factory
HRPuri
CTN
750GSM
China
8421392290
Product Description
FMS Material TDS, & Bag Details
Normally, we supply filter bags as per clients technical drawings.
But herein, we'd like to introduce some typical structures for clients references.
For accurate and safe mating between filter bag top (mouth) & the holes of cell plate in dust collectors,
it's strongly recommended to measure and tell the hole diameter, and the thickness of cell plate as well.
Suit to fabricate bag filter dust collectors which used in Rice plants, flourmill, steel, cement, chemical, carbonblack and power generation industry.
Normally, we supply filter bags as per clients technical drawings.
But herein, we'd like to introduce some typical structures for clients references.
| P84+ARM+FG Blend Felt FMS | N-(P84+ARM+FG)/FG-950G |
| Weight per Square Meter (Normal) | 950 G ±5% |
| Material (Fiber/Scrim) | (P84+ARM+FG) /FG |
| Thickness | 2.6~3 mm |
| Air permeability | 20~26 M3/M2.Min@200Pa |
| Warp Tensile Strength | > 2600N/5×20cm |
| Weft Tensile Strength | > 2600N/5×20cm |
| Warp Elongation | < 10%/(5×20cm) |
| Weft Elongation | < 15%/(5×20cm) |
| Continuous service Temperature | < 260ºC |
| Instant (<10Min.) Temperature bears | < 280ºC |
| Liner Shrinkage@130 ºC | MD<1.5%, XD<1% |
| Mechanical Finish | Heat Setting, Singeing, Calendering |
| Chemical Finish | / |
| Mullen (PSI) | / |
| Water Repellent) | / |
| Surface Electric-Resistance | / |
| Special Surface or Deep Treatment (In case client specially request to) | PTFE Membrane Laminated (PTFE-ML), or PFTE Emulsion Soaking (PTFE-ES) |
| Other Customise Requests | Acceptable depends on MOQ. |
| More about filtration felt: Besides above technical data, we accept customizing incude extra Chemical & Mechanical finishing ! | |
| Snap Ring & Filter Mouth Sturcture | |
 Pitcutre just show structrure, not for felt materials |  Pitcutre just show structrure, not for felt materials |
| Ring material: S.S.304 - Wire Ø4 | Spring Steel Belt: 0.4MM-25/28/30/32/34 Belt Ring Materials: Normal Spring Steel, or S.S. |
it's strongly recommended to measure and tell the hole diameter, and the thickness of cell plate as well.
Suit to fabricate bag filter dust collectors which used in Rice plants, flourmill, steel, cement, chemical, carbonblack and power generation industry.