Audited Supplier
CV-1580
Online Support/Service at Customer Site
14 Months
Metal
Metal-Cutting CNC Machine Tools
Linear Control
Closed-Loop Control
CNC/MNC
0.01~0.02(mm)
Economical CNC Machine Tools
GS, CE, RoHS, ISO 9001, ISO 14000
New
11000
Josen
Wooden/Iron Bracket/Wooden Box
5350*4800*3350mm
Changzhou, Jiangsu, China
8457101000
Product Description
VMC1580 Advanced Technology Cost-Effective 3 Axis Metal CNC Machine Milling Cutting CNC Machine Tool Vertical Machining Center
Basic Info
| Number | Name | Number | Name |
|---|---|---|---|
| 1 | FANUC 0I - MF CNC Controller (Japan) | 10 | Chip tray and water tank |
| 2 | Full - cover shield | 11 | Transformer |
| 3 | Automatic lubrication system | 12 | Spindle air - curtain dust - proof system |
| 4 | Anchor bolts and pads | 13 | Mechanical, electrical, and operation manuals |
| 5 | Toolbox | 14 | Rigid tapping |
| 6 | Work lamp | 15 | Electrical cabinet heat - cycle system |
| 7 | Warning light | 16 | Machine - cleaning water gun |
| 8 | M30 automatic power - off system | 17 | Three - axis guide - rail telescopic shield |
| 9 | Hand - held air - blowing gun for chip removal | 18 | 24 - arm - type tool magazine |
| Description/Machine Model | Unit | CV - 1580 |
|---|---|---|
| Travel | ||
| X - axis travel | mm | 1520 |
| Y - axis travel | mm | 800 |
| Z - axis travel | mm | 700 |
| Distance from spindle nose to worktable surface | mm | 155 - 855 |
| Worktable | ||
| Worktable size (X * Y) | mm | 1650 * 800 |
| T - slot size (width * number of slots * distance) | mm | 18 * 5 * 100 |
| Maximum worktable load capacity | kg | 1400 |
| Spindle | ||
| Spindle motor power (continuous / 30 minutes) | kW | 15 / 18.5 |
| Spindle speed | r/min | 10 - 8000 |
| Spindle inner taper | BT50 | |
| Axes | ||
| X - axis motor power | kW | βis40 / 2000 (3.0 kW) |
| Y - axis motor power | kW | βis40 / 2000 (3.0 kW) |
| Z - axis motor power | kW | βis40B / 2000 (3.0 kW) |
| X - axis screw rod / ball screw | 050 * C3 grade / MSR45L - S2 - 2Z - C3 ball screw / | |
| Y - axis screw rod / ball screw | 050 * C3 grade / MSR45L - S2 - 2Z - C3 ball screw / | |
| Z - axis screw rod / ball screw | 050 * C3 grade / MSR55S - S2 - 2Z - C3 ball screw / | |
| Feed rate | ||
| Rapid feed rate (X / Y / Z) | m/min | 20000 / 20000 / 20000 |
| Maximum cutting feed rate | m/min | 1 - 10000 |
| Tool change system (optional) | set | |
| Tool magazine capacity (standard / optional) | 24 / 30 | |
| Tool magazine type | Arm - type | |
| Tool clamping form | MAS - P50 - 1 (45°) | |
| Maximum diameter of adjacent tool | mm | 0105 |
| Maximum diameter of empty - space tool | mm | 0200 |
| Maximum tool length | mm | 350 |
| Maximum tool weight | kg | 15 |
| Machine precision | ||
| Three - axis laser positioning accuracy (VDI3441 statistical method) Environmental requirements: Temperature change of machine environment within 12 hours before detection shall not exceed 4 °C, and temperature change during detection shall not exceed 2 °C | ||
| Positioning accuracy (full stroke) | mm | 0.015 |
| Repeat positioning accuracy (full stroke) | mm | 0.008 |
| System | ||
| Controller | FANUC 01 - MF | |
| Pneumatic system | ||
| Water tank capacity | liter | 350 |
| Air pressure demand | kg/cm² | 6 |
| Electricity | ||
| Power specification | AC380 ± 10%, 3 - phase, 60Hz / 50Hz | |
| Power demand | KVA | 50 |
| Others | ||
| Floor space (length * width) | mm | 5350 * 4800 (including foot - plate pressure station) |
| Machine height (maximum) | mm | 3350 |
Machine Features
The machine body, column, spindle box and other key parts are made of Meehanna castings, which have a stable organization and maintain the quality permanently. The castings have been analyzed by finite element analysis computer calculation, reasonable structural strength and reinforcement matching, to provide high rigidity of the machine. The casting structure adopts one-piece molding technology, box structure, processing of large-scale pentahedral machining machine, a clamping processing is completed, the machine tool has a high rigidity, high strength, excellent geometric precision. And can ensure the long-term stability and high precision of the machine tool. In order to prevent deformation after machining, the castings are thoroughly annealed, which is favorable to eliminate internal stress.
The base is wide, the column is triangular box structure, heavy load full support design, solid structure, can ensure the heavy load capacity during machining.
The symmetrical design of the left and right sides of the column balances the weight of both sides, which can maintain the stability of the machine accuracy.
The spindle box is reinforced with ribs, and the ratio of the contact length between the spindle box and column is appropriate to provide stable support for the spindle.
The X/Y/Z axes adopt linear guideways with high rigidity, low noise, and low friction, which can be used for rapid traverse and obtain the best rounding accuracy.
Rapid displacement X/Y/Z: 20/20/20m/min.
The 3-axis servo motor adopts absolute value detection, so it is not necessary to do home return every time when machining, which can improve the efficiency, and at the same time, because there is no limit switch, it can reduce the failure rate and increase the reliability of the machine.
The 3-axis servo motor and screw are directly connected by precision coupling, which can eliminate the connection gap and improve the transmission efficiency.
The cutting fluid capacity is up to 350L, which can quickly discharge the cutting heat. The water tank is designed as a double tank and placed inside the machine to save space.
The spindle adopts precision angled ball bearings for high speed and high precision, and the standard speed is up to 8000 rpm. The standard machine adopts high horsepower spindle motor, and high torque motor can be selected when matching with higher torque output.
The front of the spindle adopts labyrinth design and air curtain protection function, which effectively prevents cutting fluid from entering the spindle and damaging the spindle bearings.
The electrical box adopts side-mounted design to save space and maximize the use of limited space.
The machine body, column, spindle box and other key parts are made of Meehanna castings, which have a stable organization and maintain the quality permanently. The castings have been analyzed by finite element analysis computer calculation, reasonable structural strength and reinforcement matching, to provide high rigidity of the machine. The casting structure adopts one-piece molding technology, box structure, processing of large-scale pentahedral machining machine, a clamping processing is completed, the machine tool has a high rigidity, high strength, excellent geometric precision. And can ensure the long-term stability and high precision of the machine tool. In order to prevent deformation after machining, the castings are thoroughly annealed, which is favorable to eliminate internal stress.
The base is wide, the column is triangular box structure, heavy load full support design, solid structure, can ensure the heavy load capacity during machining.
The symmetrical design of the left and right sides of the column balances the weight of both sides, which can maintain the stability of the machine accuracy.
The spindle box is reinforced with ribs, and the ratio of the contact length between the spindle box and column is appropriate to provide stable support for the spindle.
The X/Y/Z axes adopt linear guideways with high rigidity, low noise, and low friction, which can be used for rapid traverse and obtain the best rounding accuracy.
Rapid displacement X/Y/Z: 20/20/20m/min.
The 3-axis servo motor adopts absolute value detection, so it is not necessary to do home return every time when machining, which can improve the efficiency, and at the same time, because there is no limit switch, it can reduce the failure rate and increase the reliability of the machine.
The 3-axis servo motor and screw are directly connected by precision coupling, which can eliminate the connection gap and improve the transmission efficiency.
The cutting fluid capacity is up to 350L, which can quickly discharge the cutting heat. The water tank is designed as a double tank and placed inside the machine to save space.
The spindle adopts precision angled ball bearings for high speed and high precision, and the standard speed is up to 8000 rpm. The standard machine adopts high horsepower spindle motor, and high torque motor can be selected when matching with higher torque output.
The front of the spindle adopts labyrinth design and air curtain protection function, which effectively prevents cutting fluid from entering the spindle and damaging the spindle bearings.
The electrical box adopts side-mounted design to save space and maximize the use of limited space.
Machine Center Application: This VMC is suitable for mechanical processing and mold making .And it can adapt to the processing requirement from rough machining to finish machining .It can also finish many working procedures like milling ,drilling ,tapping ,boring ,etc.
1. What is your product range?
A : We specialized in Vertical Machining Center, CNC Lathe, Milling Machines, Lathes, Drilling Machines, Saws, Shapers and so on.
2:What kind of controllers do you use on machines?
A :Siemens, GSK, Fanuc, Syntec etc. You can choose as your request.
3. What is your trade terms?
A : EXW, FOB, CFR and CIF all acceptable.
4 : How can I choose the most suitable machines ?
A : Please tell me model or technical parameter you need, tell us what you want to do by using CNC machining center, we can provide machine with the best price and quality.
You can also send us product pictures and we will choose the most suitable machine for you.
5: What's the payment terms ?
A : T/T ,30% deposit when order ,70% balance payment before shipment ; Irrevocable LC at sight.
6. What about the after sale service?
A:We provide one year warranty, if any parts broken, we will send you a new one for free.
7.Before sending me an inquiry on our machine, it is better for you to provide me the following information?
1)Your metal workpiece size. Because in our factory, we have different models according to working area.
2)Your workpiece materials.
Aluminum/Steel/Iron/Titanium Alloy?
3) You also can send us the drawing of your workpiece, so that we can have a moe careful check and give your more accurate suggestions.